Search Results

63 items found matching 1962 Oldsmobile F-85 Cutlass 2 door Convertible
The listing below contains just short, abbreviated descriptions.
Please click on the part name in red in order to get a complete description.
Body Weatherstrip Kit

p/n: 90-3185-90

This kit includes the major weatherstrip components and some other essential parts needed for the body of your restoration project.

$905.90/set
$815.30/set
10% discount
Kit
Convertible roof rail kit

p/n: 50-0404-65

Convertible roof rail weatherstrip. This part fits on the folding roof of the vehicle and seals the side window when the window is fully raised.

$452.60/set
In Stock
Front Door Vent Window Kit

p/n: 90-0421-90

This front door vent window weatherstrip kit is a four (4) piece set that contains the main vent window seals and division post seals. All of the pieces were designed from original parts for a precise, factory fit.

$196.30/set
$186.50/set
5% discount
Kit
Front Door weatherstrip

p/n: 50-0339-72

Door edge weatherstrip with molded ends. This part is the primary door to body weatherstrip. Includes six (6) pins and thirty-four (34) sockets for easy installation.

$185.20/pr.
In Stock
Windshield Gasket

p/n: 50-0291-50

This windshield gasket mounts around the full perimeter of the front glass and has properly molded corners for a precise, factory fit. It also has the slot to accommodate the outer edge's decorative molding.

$156.70/ea.
Made to Order Takes 2-3 Days
Front Door Vent Window Weatherstrips

p/n: 38-0084-55

These front door vent window weatherstrips are the main seals needed to replace the rubber on your vent windows. They are designed and molded from original parts for superior fitment and seal.

$150.20/pr.
In Stock
Transmission mount service

p/n: 50-0463-25

Mount, transmission support. One (1) per car. Revulcanization service only.Length: 5.25 inches. Width: 2.25 inches.

$132.30/ea.
Call or Email
Hinge Pillar Weatherstrip

p/n: 50-0341-63

Convertible Hinge Pillar Weatherstrip - Attaches to the body and seals between the A-pillar post and the front section of the door or vent window frame when the door is closed.

$127.60/pr.
In Stock
Steel sash channel

p/n: 50-0417-59

Channel, front window lower sash. Formed steel channel only, not chromed. Ready for attaching to your old brackets.

$107.30/pr.
In Stock
Beltline weatherstrip

p/n: 70-0961-60

Weatherstrip, inner beltline. Thick pile lined, without chrome bead. Nine sixteenths (9/16) inch high by nine thirty seconds (9/32) inch thick, two four (4) foot lengths.

$58.90/pr.
In Stock
Beltline weatherstrip

p/n: 50-0378-61

Weatherstrip, quarter window beltline outer. Rubber lipped scraper seal as original.

$56.30/pr.
In Stock
Beltline weatherstrip

p/n: 50-0376-61

Weatherstrip, front door outer beltline. For models with chrome strip on door. (Does not have chrome bead on weatherstrip). See our #50-0385-58 for plastic guide.

$56.20/pr.
In Stock
U Jamb lock pillar filler

p/n: 50-0397-79

Door lock pillar seal. This part seals the bottom of the rear side window, and may also be known as a door jamb seal.

$55.70/pr.
In Stock
Beltline weatherstrip

p/n: 50-0375-60

Weatherstrip, front door inner beltline.

$55.20/pr.
In Stock
Beltline weatherstrip

p/n: 50-0380-60

Weatherstrip, quarter window beltline inner. Mohair faced with attaching clips as original.

$55.20/pr.
In Stock
Run channel upper bumper

p/n: 70-1870-62

Bumper, upper division post. Fully molded with metal core.Width: 1.8125 inches. Height: .375 inches.

$51.40/pr.
In Stock
Side window leading edge

p/n: 50-0374-80

Side window vertical leading edge weatherstrip.

$49.20/pr.
In Stock
Beltline weatherstrip 3 foot

p/n: 70-1121-61

Weatherstrip, outer beltline (sometimes called "scraper seal"). For use on front, rear, and quarter windows without a chrome reveal molding at the window beltline. Small stainless bead with rubber lip. Three (3) foot length.

$46.40/pr.
In Stock
Vent division bar weatherstrip

p/n: 50-0338-56

Front vent window division post seal. Fully molded with metal core and attaching tabs.

$46.10/pr.
In Stock
Peel-N-Stick Trunk Weatherstrip

p/n: 70-0774-WT

This trunk weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body. Easy to install 3M Peel-N-Stick backing provides superior adhesion for reliable performance.

$45.60/ea.
In Stock
Flexible Run Channel

p/n: 60-0583-58

Glass run channel. Made with an electrostatic flocked rubber that has flexibility and reduces friction to secure and let the glass slide inside the channel. Helps eliminate rattle, provide a smooth sliding surface and protect glass. Sold as 96" strips.

$44.89/ea.
In Stock
Beltline Weatherstrip 6 Foot

p/n: 70-1120-61

Weatherstrip, outer beltline (sometimes called "scraper seal"). For use on front, rear, and quarter windows without a chrome reveal molding at the window beltline. Small stainless bead with rubber lip. Six (6) foot length.

$42.40/ea.
In Stock
Window Sash / Beltline Channel

p/n: 70-0651-58

Weatherstrip, window sash channel (beltline), inner. Rigid, rubber covered weatherstrip with flock lining and one fourth (1/4) inch chrome edge. Used on front door, rear door and rear quarter window. Six (6) foot strip.

$40.50/ea.
In Stock
Taillight lens gasket

p/n: 25-0100-15

Gasket set, taillight housing and lens. Eight (8) piece set used on taillight and backup light.

$40.20/set
Made to Order Takes 2-3 Days
Trunk Weatherstrip

p/n: 70-0774-84

This trunk weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.

$35.60/ea.
In Stock
Battery clamp cover

p/n: 70-0095-21

Cover, battery clamp. Control unsightly sulfate buildup. Help protect the nearby metal and finish. Good copy from original part.Length: 3.5 inches.

$18.80/ea.
In Stock
Rocker panel dust shield cover

p/n: 70-2392-45

Cover, rocker panel inner dust shield. Fully molded with proper attaching teeth and flap.

$18.30/pr.
In Stock
Door handle gasket kit

p/n: 50-0560-69

Gasket set, door handle. Die cut dense rubber to original dimensions. Four (4) piece set for two (2) doors.

$14.90/pr.
In Stock
Trunk bumper

p/n: 50-0546-87

Bumper, trunk. On side near hinge end. Made with metal core.Width: 1.625 inches. Height: 1.0 inches.

$14.90/ea.
In Stock
Plastic guide plate

p/n: 50-0384-62

Guide plate, plastic, attaches to various outer scraper weatherstrips.

$13.00/ea.
In Stock
Hood bumper

p/n: 25-0086-42

Bumper, hood-to-fender. Requires six (6) per car.Length: 1.375 inches. Width: .875 inches.

$10.90/ea.
In Stock
Masticated rubber sheet

p/n: 70-0645-45

Masticated sheet. Three thirty seconds (3/32) inch thick rubber sheet containing random milled cotton cord reinforcement for front end splash aprons, etc. This product is a four (4) foot wide roll, and will only be sold in four (4) square foot multiples

$10.80/sqf
In Stock
Plastic guide plate

p/n: 50-0385-58

Plastic guide plate, attaches to various outer scraper weatherstrips.Length: 1.625 inches. Width: .625 inches.

$10.00/ea.
In Stock
Glovebox link bumper

p/n: 50-0367-88

Bumper, glove box check link. Fits on glove box door arm as needed.Length: .75 inches. Width: .5625 inches. Height: .3125 inches.

$7.90/ea.
In Stock
Window stop stem bumper

p/n: 33-0540-62

Cushion (stem bumper), window stop, lower. For front and rear door, rear side and quarter windows as required.

$7.90/ea.
In Stock
Tie rod dust cover

p/n: 70-0537-32

Dust cover, tie rod ends.

$7.80/ea.
In Stock
Antenna mount pad

p/n: 50-0559-21

Pad, antenna mounting. Used on models with manual antennas only.

$7.50/ea.
In Stock
Door Weatherstrip w/ Clips (Sponge Rubber Extrusion - General Use)

p/n: 70-1112-73

Door edge weatherstrip made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models.

$7.40/ft.
In Stock
Door Weatherstrip w/ Clips (Sponge Rubber Extrusion - General Use)

p/n: 70-1245-73

Door edge weatherstrip made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models.

$7.20/ft.
In Stock
Brown door lock knob

p/n: 70-0660-70

Knob or push button for inside door lock, fits over 1/8" steel rod to door lock. Hard brown rubber, may be lacquered other colors as required.

$7.00/ea.
In Stock
Steering knuckle support seal

p/n: 50-0199-35

Seal, steering knuckle support, upper pivot pin. Four (4) required per car.Height: .5 inches.

$6.50/ea.
In Stock
Run channel mohair liner

p/n: 70-2863-58

Liner, mohair. Liner with a rubber backing. Apply with adhesive to division bars and channels. Helps reline guide bars on lock side of hardtops and convertibles.

$6.39/ft.
In Stock
Brown door lock knob

p/n: 70-0354-70

Knob for inside door lock control rod. Neutral brown color rubber, 3/32 inch hole. See also our #70-0660-70.

$6.30/ea.
In Stock
Peel-N-Stick Trunk Weatherstrip

p/n: 70-0510-WT

Peel-N-Stick Trunk Weatherstrip made from high quality EPDM sponge rubber. 3M Peel-N-Stick backing provides superior adhesion for reliable performance. Makes for an easier installation of deck lid weatherstripping. Also excellent for use in many different applications and on many different vehicle models.

$6.20/ft.
Made to Order Takes 2-3 Days
Trunk Weatherstrip

p/n: 70-0346-85

This weatherstrip was designed from an original part for a specific application but has many uses outside of its original purpose. The seal is structured to be applied to the body of the car.

$6.20/ft.
In Stock
Door Weatherstrip w/o Clips (Sponge Rubber Extrusion - General Use)

p/n: 70-1244-73

Door edge weatherstrip made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models.

$5.90/ft.
In Stock
Trunk Weatherstrip

p/n: 70-0510-85

This weatherstrip was designed from an original part for a specific application but has many uses outside of its original purpose. The seal is structured to be applied to the body of the car.

$5.90/ft.
In Stock
Universal mounting pad

p/n: 70-0308-17

Mounting pad, continuous for lights, hinges, brackets, and other bright work when no molded pad is available.

$5.80/ft.
In Stock
Body hole plug

p/n: 35-0863-45

Plug, body sheet metal holes. Used in various places (like trunks). For one and one half (1-1/2) inch hole in body.

$5.70/ea.
In Stock
Door Weatherstrip w/o Clips (Sponge Rubber Extrusion - General Use)

p/n: 70-1111-73

Door edge weatherstrip made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models.

$5.50/ft.
In Stock
Sash channel filler 1/16 cork

p/n: 70-1115-57

Filler strip, window glass sash channel. One sixteenths (1/16) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherstrip type of filler. This is the highest quality linen back, rubber cork composition on

$4.69/ft.
In Stock
Sash Channel Filler 1/16 Rubber

p/n: 70-2170-57

Filler strip, window glass sash channel. One sixteenths (1/16) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherlip type of filler. This is the highest quality rubber like polymer designed for settin

$4.29/ft.
In Stock
Door or tailgate bumper

p/n: 33-1228-71

Bumper pads, door or tailgate. Twin retainer style. Three eighths (3/8) inch by seven eighths (7/8) inch by one half (1/2) inch high.

$4.20/ea.
In Stock
Sash channel filler 1/32 cork

p/n: 70-1114-57

Filler strip, window glass sash channel. One thirty seconds (1/32) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherlip type of filler. This is the highest quality linen back, rubber cork composition

$3.99/ft.
In Stock
Sash Channel Filler 1/32 Rubber

p/n: 70-2169-57

Filler strip, window glass sash channel. One thirty seconds (1/32) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherlip type of filler.

$3.99/ft.
In Stock
Door bumper

p/n: 33-1227-71

Bumper, door edge, twin retainer style, three eighths (3/8) inch wide by seven eighths (7/8) inch long by three eighths (3/8) inch high.

$3.50/ea.
In Stock
Floor pan plug

p/n: 35-0262-20

Plug, floor pan, rear compartment and body. Up to 12 per car, as required.

$3.30/ea.
In Stock
Hydraulic pump mounting pad

p/n: 70-0946-67

Mounting pad, folding top hydraulic pump mount. Special design to hold pump mounting bracket to floor pan. Four (4) needed per car.Height: 1.0 inches.

$3.10/ea.
In Stock
Trunk bumper

p/n: 33-0293-87

Bumper, trunk and tailgate lid bumper support, on lid.

$2.80/ea.
In Stock
Door Bumper

p/n: 33-1235-71

Bumper, door side. Three eighths (3/8) inch block height. Two (2) or four (4) used per car.

$2.40/ea.
In Stock
Door Bumper

p/n: 33-1232-71

Bumper, door side. Seven eighths (7/8) inch block height. Two (2) or four (4) used per car.

$2.40/ea.
In Stock
Door Bumper

p/n: 33-1233-71

Bumper, door side. Five eighths (5/8) inch block height. Two (2) or four (4) used per car.

$2.40/ea.
In Stock
Lock cylinder gasket

p/n: 60-0641-69

Gasket, door or trunk lock cylinder. Exact reproduction

$2.10/ea.
In Stock