Need Assistance?

We are here to help.

Call 800-447-0849

Search Results

63 items found matching 1962 Oldsmobile Super 88 4 door Hardtop
Glass Weatherstrip Kit

p/n: 90-3324-90

This ten (10) piece Glass Weatherstrip Kit includes the weatherstrip components needed for the glass on your classic restoration project. These parts are designed from originals for superior performance and a factory fit.

$800.39/set
Kit
Body Weatherstrip Kit

p/n: 90-3166-90

This kit includes the major weatherstrip components and some other essential parts needed for the body of your restoration project.

$689.29/set
Kit
Front Door Vent Window Set

p/n: 90-0426-90

This four (4) piece Front Door Vent Window Set contains the main vent window seals and division post seals. All of the pieces were designed from original parts for a precise, factory fit.

$218.79/set
Kit
Rear Window Gasket

p/n: 60-0608-81

This rear window gasket mounts around the full perimeter of the back glass and has properly molded corners for a precise, factory fit.

$215.29/ea.
In Stock
Hardtop roof rail weatherstrip

p/n: 60-0646-68

Hardtop roof rail weatherstrip. This part fits on the roof of the vehicle and seals the side window when the window is fully raised.

$209.79/pr.
In Stock
Front Door Weatherstrips

p/n: 70-0825-72

Door edge weatherstrip with molded ends. This part is the primary door to body weatherstrip. Includes six (6) clips for easy installation. Made of top quality rubber.

$198.49/pr.
In Stock
Windshield Gasket

p/n: 27-0055-50

This Windshield Gasket mounts around the full perimeter of the front glass and has properly molded corners for a precise, factory fit.

$184.69/ea.
In Stock
Front Door Vent Window Weatherstrips

p/n: 38-0092-55

These Front Door Vent Window Weatherstrips are the main seals needed to replace the rubber on your vent windows. They are designed and molded from original parts for superior fitment and seal.

$169.59/pr.
In Stock
Rear Door Weatherstrips

p/n: 60-0637-72

Door edge weatherstrip, rear doors with molded ends. This part is the primary door to body weatherstrip. Includes four (4) clips.

$169.59/pr.
In Stock
Motor (Engine) Mount

p/n: 25-0041-11

Front engine support insulator. Aftermarket replacement.

$120.29/ea.
In Stock
Cowl drain gutter

p/n: 70-0780-73

Gutter, windshield lower corner, left and right. Rubber with metal core as original. Seven and three quarters long (7-3/4").Length: 7.75 inches.

$99.49/pr.
In Stock
Beltline Weatherstrip

p/n: 70-0961-60

This Beltline Weatherstrip is thick pile lined without chrome bead. Available in 4ft pairs.

$84.29/pr.
In Stock
Taillight gasket

p/n: 25-0078-15

Gasket, taillight housing to body. Note: Two (2) pairs are required for Starfires. All other vehicles need one (1) pair.

$82.99/pr.
In Stock
Beltline Weatherstrips

p/n: 70-1121-61

These Beltline Weatherstrips (sometimes called "scraper seal") come in a three (3) foot pair. For use on front, rear, and quarter windows without a chrome reveal molding at the window beltline. Available in 3ft pair.

$71.29/pr.
In Stock
Beltline Weatherstrip

p/n: 70-1120-61

This Beltline Weatherstrip comes in a six (6) foot length for the outer beltline (sometimes called "scraper seal"). For use on front, rear, and quarter windows without a chrome reveal molding at the window beltline. Available in 6ft lengths.

$65.99/ea.
In Stock
Rear Door Pillar Filler

p/n: 70-0837-79

This Rear Door Pillar Filler pair is designed from the original part for superior fitment and sealing. This left and right weatherstrip filler mounts at the bottom of the rear side window, lower leading edge to seal the rear quarter window. Also known as a door jamb seal.

$64.99/pr.
In Stock
Beltline Weatherstrip Channel

p/n: 70-0651-58

This Beltline Weatherstrip Channel is a five (5) foot length of rigid channel with a flocked rubber lip and a flat stainless bead. Can be used as the inner beltline weatherstrip on front doors, rear doors and quarter windows.

$63.69/ea.
In Stock
Door weatherstrip

p/n: 70-1762-73

Weatherstrip, vertical on lock pillar.Width: .6875 inches. Height: 1.0 inches.

$62.69/pr.
In Stock
Run Channel Upper Bumper

p/n: 70-1044-62

This run channel upper bumper is manufactured as original with brass metal core.

$62.19/pr.
In Stock
Side Window Leading Edge

p/n: 70-0832-80

Side window vertical leading edge weatherstrip.

$61.39/pr.
In Stock
Vent division bar weatherstrip

p/n: 70-0849-56

Front vent window division post seal. Eleven and one half inches (11.5") and one half inch high. Fully molded with metal core and attaching tabs.

$60.79/pr.
In Stock
Peel-N-Stick Trunk Weatherstrip

p/n: 70-0773-WT

This Peel-N-Stick Trunk Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.

$56.29/ea.
In Stock
Hinge Seal

p/n: 70-1460-70

This hinge seal is installed on the front door hinge pillar at the beltline. These seals are sold as a pair for the left and right side.

$54.49/pr.
In Stock
Taillight lens gasket

p/n: 25-0079-15

Gasket, taillight lens to housing. Shear die cut sponge rubber.Length: 10.0 inches.

$53.99/pr.
Made to Order Takes 5-7 Days
Trunk Weatherstrip

p/n: 70-0773-84

This Trunk Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.

$44.99/ea.
In Stock
Hood to cowl weatherstrip

p/n: 27-0078-42

Weatherstrip, hood- to-cowl seal.Width: .625 inches.

$44.89/ea.
In Stock
Firewall grommet

p/n: 25-0099-20

Grommet, firewall accessory wiring.Length: 2.875 inches.

$32.99/ea.
In Stock
Radiator mounting pad

p/n: 70-0963-31

Radiator mounting pad, insulator. Up to four (4) used per car.Length: 6.0 inches.

$32.49/ea.
In Stock
Radiator mounting pad

p/n: 25-0087-31

Insulator, radiator support. Two (2) to four (4) used per car.Length: 6.75 inches.

$31.99/ea.
In Stock
Fuel Neck Grommet

p/n: 70-1439-39

Grommet, fuel filler neck. Fully molded with retaining flange. Easy to install, just pop in. Fits as original. Three and three eighths inch (3-3/8") outside diameter by two inches (2") inside hole diameter by seven eighths inch (7/8") height.

$26.29/ea.
In Stock
Battery Clamp Cover

p/n: 70-0095-21

This black rubber Battery Clamp Cover helps to protect the nearby metal and finish. Good copy from an original part. Length: 3-1/2" inches.

$24.89/ea.
In Stock
Rocker Panel Inner Drain Cover

p/n: 70-2392-45

This Rocker Panel Inner Drain Cover pair is designed from the original part for superior fitment and seal. Fully molded with proper attaching teeth and flap.

$24.29/pr.
In Stock
Front Door Lock Pillar Filler

p/n: 70-0834-79

This Front Door Lock Pillar Filler pair is designed from the original part for superior fitment and sealing. This left and right weatherstrip filler seals the bottom at the front of the rear side window. Also known as a door jamb seal.

$16.99/pr.
In Stock
Plastic guide plate

p/n: 50-0384-62

Guide plate, plastic, attaches to various outer scraper weatherstrips.

$16.99/ea.
In Stock
Hood bumper

p/n: 25-0076-42

Bumper, hood side. Six (6) per car.Length: 1.4375 inches. Width: .875 inches.

$16.59/ea.
In Stock
Dimmer Switch Grommet

p/n: 40-0083-88

Steele Rubber Products offers the best quality Dimmer Switch Grommet for your classic vehicle. This universal fit dimmer switch grommet is used during carpet installations in automotive restorations. Includes a wide flange for floor dimmer switch fitments.

$14.79/ea.
In Stock
Body Mount Isolator Pad

p/n: 50-0507-48

Isolator, body mounting. Fully molded rubber. Two inches (2") outside diameter by seven eighths inch (7/8") inside hole diameter by three fourths inch (3/4") height.

$14.69/ea.
In Stock
Masticated Rubber Sheet

p/n: 70-0645-45

This Masticated Rubber Sheet is three thirty seconds (3/32) inch thick. The rubber sheet contains random milled cotton cord reinforcement for front end splash aprons, etc.

$14.59/sqf
In Stock
Plastic guide plate

p/n: 50-0385-58

Plastic guide plate, attaches to various outer scraper weatherstrips.Length: 1.625 inches. Width: .625 inches.

$13.49/ea.
In Stock
Window Stop Stem Bumper

p/n: 33-0540-62

Cushion (stem bumper), window stop, lower. For front and rear door, rear side and quarter windows as required.

$10.79/ea.
In Stock
5/8" Door Weatherstrip with Clips

p/n: 70-1112-73

This Door Weatherstrip with Clips is made made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models. Available by the foot.

$9.89/ft.
In Stock
13/16" Door Weatherstrip with Clips

p/n: 70-1245-73

This Door Weatherstrip is made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models. Available by the foot.

$9.79/ft.
In Stock
Brown Door Lock Knob

p/n: 70-0660-70

This is the Knob or push button for the inside door lock. The part fits over 1/8" steel rod to door lock. Neutral brown color that may be lacquered with other colors as required. A hard rubber part fits many different vehicles.

$9.49/ea.
In Stock
2-5/8" Run Channel Mohair Liner

p/n: 70-2863-58

Run channel liner helps reline guide bars on lock side of hardtops and convertibles. Available by the foot.

$8.79/ft.
In Stock
Brown Door Lock Knob

p/n: 70-0354-70

This is the knob or button for the inside door lock control rod. Neutral brown color rubber, 3/32 inch hole. The part fits many different vehicles.

$8.69/ea.
In Stock
1-1/16" Trunk Weatherstrip

p/n: 70-0346-85

This Trunk Weatherstrip is designed from an original part for a specific application but has many uses outside of its original purpose. Available by the foot.

$8.59/ft.
In Stock
Peel-N-Stick Trunk Weatherstrip

p/n: 70-0510-WT

This Peel-N-Stick Trunk Weatherstrip is made from a high-quality EPDM sponge rubber. Available by the foot.

$8.59/ft.
Made to Order Takes 5-7 Days
1" Trunk Weatherstrip

p/n: 70-0510-85

This Trunk Weatherstrip was designed from an original part for a specific application but has many uses outside of its original purpose. Available by the foot.

$7.99/ft.
Made to Order Takes 5-7 Days
13/16" Door Weatherstrip without Clips

p/n: 70-1244-73

This Door Weatherstrip is made from high-quality EPDM sponge rubber. Excellent for use on many different vehicle models. Available by the foot.

$7.99/ft.
In Stock
2-1/4" Body Hole Plug

p/n: 35-0863-45

Plug, body sheet metal holes. Used in various places (like trunks). For one and one half (1-1/2) inch hole in body.

$7.79/ea.
In Stock