Search Results
Hardtop Roof Rail Weatherstrip
p/n: 20-0026-68
Hardtop roof rail weatherstrip. This part fits on the roof of the vehicle and seals the side window when the window is fully raised. Note: For 1962-1963 this part is considered a usable replacement but not original.
Window Felt Beltline Weatherstrip
p/n: 80-0651-57
This is an eight (8) piece Original / Authentic material window felt beltline equipment style side window horizontal seal. These strips wipe the side windows when the glass is lowered.
Front Door Weatherstrip
p/n: 20-0098-72
Door edge weatherstrip. This part is the primary door to body weatherstrip.
Windshield Gasket
p/n: 20-0137-50
This Windshield Gasket mounts around the full perimeter of the front glass and has properly molded corners for a precise, factory fit. It also has the slot to accommodate the outer edge's decorative molding.
Body To Frame Mounting Pad Set
p/n: 70-4601-48
This all rubber thirty-six (36) piece Body to Frame Mounting Pad set is designed from the original parts for superior fitment and function. These mounting pads are installed between the vehicle frame and the body floor pans.
Spring Shackle Bushing Set
p/n: 20-0083-33
This Spring Shackle Bushing Set is for the front of rear leaf spring. Designed from original parts for a precise, factory fit. Two (2) sets required per car.
Rear Window Gasket
p/n: 20-0049-81
This Rear Window Gasket mounts around the full perimeter of the back glass and has properly molded corners for a precise, factory fit. It also has the slot to accommodate the outer edge's decorative molding.
Voltage Regulator Cover Shield
p/n: 70-4531-17
This Voltage Regulator Cover Shield is designed from the original part for superior fitment and function. This cover shield is located over and above the voltage regulator.
Spring Shackle Bushing Set
p/n: 20-0066-33
This Spring Shackle Bushing Set is for the rear of rear leaf spring. This set is made with original style rubber bushings. Two (2) sets are required per car.
Rear Bumper Stone Deflector
p/n: 20-0079-47
This Rear Bumper Stone Deflector is used to keep road debris from coming up and damaging your vehicle. The seal is an exact reproduction of the original rear bumper to body seal.
Front Door At Beltline Weatherstrips
p/n: 20-0094-73
This Front Door At Beltline Weatherstrip pair is designed from the original part for superior fitment and seal. This inner dog leg door seal fits at the door front at beltine inner.
Hood Bumper Set
p/n: 20-0078-42
This eight (8) piece Hood Bumper set is designed from the original parts for superior fitment and function.
Trunk Weatherstrip
p/n: 20-0095-84
This Trunk Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.
Splash apron
p/n: 20-0076-31
Set, radiator support to frame rubber splash shield. Four (4) piece set.
Fender Skirt Weatherstrip
p/n: 20-0069-44
This Fender Skirt Weatherstrip pair is designed from the original part for superior fitment and seal. This Left and Right edge weatherstrip fits between the rear fender bodywork and the removable fender skirt.
Hood bumper
p/n: 20-0014-42
Bumpers, hood front to radiator support. Five sixteenths (5/16) inch by twenty four (24) thread.
Radiator shroud seal
p/n: 20-0114-31
Seal, radiator air deflector side for right side. Includes special plastic buttons to install.
Front suspension bumper
p/n: 20-0034-32
Bumper, front suspension upper arm. Three eighths (3/8) inch by three fourths (3/4) inch bolt, twenty four (24) threads.
Front Suspension Bumper
p/n: 20-0080-32
Bumper for front suspension upper arm. Measures three eighths (3/8) inch by sixteen (16) by eleven sixteenths with (11/16) inch bolt thread.
Firewall To Hood Weatherstrip - Cowl Lacing
p/n: 70-3137-43
This Firewall To Hood Weatherstrip - Cowl Lacing is designed from the original part for superior fitment and seal. An exact reproduction of the original profile. This weatherstrip installs at the rear of the engine bay to seal between the hood and vehicle body cowl.
Hood bumper
p/n: 20-0041-42
Bumpers, rear of hood to top of fender. Two (2) required per vehicle.Ford Cars 1961-64 Bumpers, rear of hood to top of fender. Requires 2 pair for hood.
Front Stabilizer Bar End Link Kit
p/n: 20-0037-33
This eleven (11) piece Front Stabilizer Bar End Link Kit is designed from original parts so it fits correctly. Two (2) kits / sets required per car as one (1) kit / set services one side of front stabilizer bar.
Door bumper
p/n: 20-0003-71
Bumpers, door. Seven sixteenths (7/16) inch high. Fits on door jamb where rear of door closes against body and on rear lower part of door.
Door bumper
p/n: 20-0004-71
Bumpers, door. Five eighths (5/8) inch high. Installs on door jamb where rear of door closes against body and on rear lower part of door.
Radiator Mounting Pad Set
p/n: 20-0112-31
This five (5) piece Radiator Mounting Pad Set is designed from the original part for superior fit and support. These shims are installed between the radiator and radiator core support.
Body Hole Plug
p/n: 20-1041-21
Plug, cowl and floor pan. This body plug covers a sheet metal hole that is one and one seven eighths (1-7/8) inch in diameter.
Door bumper
p/n: 20-0067-71
Bumper, door. Installs on back edge of door. Please check your car for quantities required.Usually two (2) to eight (8) per vehicle.
Glovebox Arm Bumper Stop
p/n: 20-1399-88
Stop, glovebox arm.Ford Truck 1957-64 Stop, glovebox arm. Requires 2 each. Ford Cars 1955-68 Bumper, glovebox door check arm stop.
Body Hole Plug
p/n: 20-1039-21
Plug, cowl and floor pan. This body plug covers a sheet metal hole that is one and one fourth (1-1/4) inch in diameter.
Body Hole Plug
p/n: 20-1040-21
Plug, hole in dog leg cover. Installs at front of door where bolt to adjust vent window frame is located. This body plug covers a sheet metal hole that is one and one half (1-1/2) inch in diameter.
5/16" Standard Bumper
p/n: 33-0128-88
Standard Bumper - Commonly used for fuel filler or glovebox doors.