Search Results

54 items found matching 1963 Oldsmobile Ninety Eight 4 door Hardtop - 4 Window
The listing below contains just short, abbreviated descriptions.
Please click on the part name in red in order to get a complete description.
Hardtop roof rail weatherstrip

p/n: 70-0892-68

Hardtop roof rail weatherstrip (4 window 4dr hardtop). This part fits on the roof of the vehicle and seals the side window when the window is fully raised. Includes four (4) clips. Note: this is for 4 window 4dr hardtops only (vehicles with

$198.30/pr.
In Stock
Rear door weatherstrip

p/n: 70-0953-72

Rear door edge weatherstrip (4 window 4 door hardtop). This part is the primary door to body weatherstrip. Includes eight (8) clips. Note: this is for 4 window 4dr hardtops (vehicles without rear quarter windows).

$187.70/pr.
In Stock
Rear Window Gasket

p/n: 70-0816-81

This rear window gasket mounts around the full perimeter of the back glass and has properly molded corners for a precise, factory fit.

$177.80/ea.
In Stock
Front Door Vent Window Kit

p/n: 90-0429-90

This front door vent window weatherstrip kit is a four (4) piece set that contains the main vent window seals and division post seals. All of the pieces were designed from original parts for a precise, factory fit.

$185.50/set
$176.20/set
5% discount
Kit
Front Door Vent Window Weatherstrips

p/n: 38-0096-55

These front door vent window weatherstrips are the main seals needed to replace the rubber on your vent windows. They are designed and molded from original parts for superior fitment and seal.

$139.40/pr.
In Stock
Windshield Gasket

p/n: 70-0731-50

This windshield gasket mounts around the full perimeter of the front glass and has properly molded corners for a precise, factory fit.

$125.70/ea.
In Stock
Motor (Engine) Mount

p/n: 25-0041-11

Front engine support insulator. Aftermarket replacement.

$101.70/ea.
In Stock
Beltline weatherstrip

p/n: 70-0961-60

Weatherstrip, inner beltline. Thick pile lined, without chrome bead. Nine sixteenths (9/16) inch high by nine thirty seconds (9/32) inch thick, two four (4) foot lengths.

$58.90/pr.
In Stock
Beltline Outer Weatherstrip

p/n: 70-0802-61

Weatherstrip, front door outer beltline "scraper seal" type. Pair of 25" long strips. For models with chrome trim on doors. Plastic guides not included.

$55.10/pr.
In Stock
Door Outer Beltline Weatherstrip

p/n: 70-0803-61

Weatherstrip, rear door outer beltline "scraper seal" type. Plastic guides not included. For models with chrome trim on doors.

$54.30/pr.
In Stock
Lock pillar filler

p/n: 70-0837-79

Rear door lock pillar seal. This part seals the bottom of the rear side window, and may also be known as a door jamb seal. Fully molded authentic rubber construction with metal core. Includes twelve (12) clips for easy installation. Note:

$52.90/pr.
In Stock
Beltline Weatherstrip

p/n: 70-0749-60

Window Felt Inner - One (1) pair of three (3) foot lengths. Rigid, flocked rubber lip, with flat stainless bead. For front door, rear door and quarter windows.

$50.90/pr.
In Stock
Rigid Run Channel

p/n: 70-0752-58

Window run channel, rigid. Single six (6) foot length. Metal backed, rigid, pile lined, and no bead. For front door and rear door division posts.

$50.79/ea.
In Stock
Peel-N-Stick Trunk Weatherstrip

p/n: 70-0773-WT

This trunk weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body. Easy to install 3M Peel-N-Stick backing provides superior adhesion for reliable performance.

$49.50/ea.
In Stock
Beltline weatherstrip 3 foot

p/n: 70-1121-61

Weatherstrip, outer beltline (sometimes called "scraper seal"). For use on front, rear, and quarter windows without a chrome reveal molding at the window beltline. Small stainless bead with rubber lip. Three (3) foot length.

$46.40/pr.
In Stock
Hood to cowl weatherstrip

p/n: 70-3458-42

Weatherstrip, hood-to-cowl. Pre-drilled with ten (10) holes. Contains ten (10) clips for easy installation.

$46.30/ea.
In Stock
Vent division bar weatherstrip

p/n: 70-0859-56

Front vent window division post seal. Fully molded with metal core and attaching tabs.

$46.10/pr.
In Stock
Side window leading edge

p/n: 70-0806-80

Side window vertical leading edge weatherstrip. This part attaches to the vertical edge of the rear side windows when the rear side windows are fully raised. Molded authentic rubber construction, this part does not include the chrome piece that attaches d

$44.70/pr.
In Stock
Beltline Weatherstrip 6 Foot

p/n: 70-1120-61

Weatherstrip, outer beltline (sometimes called "scraper seal"). For use on front, rear, and quarter windows without a chrome reveal molding at the window beltline. Small stainless bead with rubber lip. Six (6) foot length.

$42.40/ea.
In Stock
Window Sash / Beltline Channel

p/n: 70-0651-58

Weatherstrip, window sash channel (beltline), inner. Rigid, rubber covered weatherstrip with flock lining and one fourth (1/4) inch chrome edge. Used on front door, rear door and rear quarter window. Six (6) foot strip.

$40.50/ea.
In Stock
Trunk Weatherstrip

p/n: 70-0773-84

This trunk weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.

$39.50/ea.
In Stock
Firewall grommet

p/n: 25-0099-20

Grommet, firewall accessory wiring.Length: 2.875 inches.

$24.80/ea.
In Stock
Radiator mounting pad

p/n: 70-0963-31

Radiator mounting pad, insulator. Up to four (4) used per car.Length: 6.0 inches.

$24.50/ea.
In Stock
Battery clamp cover

p/n: 70-0095-21

Cover, battery clamp. Control unsightly sulfate buildup. Help protect the nearby metal and finish. Good copy from original part.Length: 3.5 inches.

$18.80/ea.
In Stock
Rocker panel dust shield cover

p/n: 70-2392-45

Cover, rocker panel inner dust shield. Fully molded with proper attaching teeth and flap.

$18.30/pr.
In Stock
Plastic guide plate

p/n: 50-0384-62

Guide plate, plastic, attaches to various outer scraper weatherstrips.

$13.00/ea.
In Stock
Lock pillar filler

p/n: 70-0834-79

Front door lock pillar seal. This part seals the bottom of the rear side window, and may also be known as a door jamb seal. Fully molded authentic rubber construction with metal core. Includes eight (8) clips for easy installation. Note: o

$12.90/pr.
In Stock
Dimmer switch grommet

p/n: 40-0083-88

Grommet, dimmer switch for carpet application.

$11.00/ea.
In Stock
Body mounting pad

p/n: 50-0507-48

Pad, body mounting. Fully molded rubber. Two inches (2") outside diameter by seven eighths inch (7/8") inside hole diameter by three fourths inch (3/4") height.

$10.90/ea.
In Stock
Masticated rubber sheet

p/n: 70-0645-45

Masticated sheet. Three thirty seconds (3/32) inch thick rubber sheet containing random milled cotton cord reinforcement for front end splash aprons, etc. This product is a four (4) foot wide roll, and will only be sold in four (4) square foot multiples

$10.80/sqf
In Stock
Hood bumper

p/n: 25-0089-42

Bumper, hood to fender. Four (4) to six (6) per car.Length: 1.5625 inches. Width: .875 inches.

$10.20/ea.
In Stock
Plastic guide plate

p/n: 50-0385-58

Plastic guide plate, attaches to various outer scraper weatherstrips.Length: 1.625 inches. Width: .625 inches.

$10.00/ea.
In Stock
Window stop stem bumper

p/n: 33-0540-62

Cushion (stem bumper), window stop, lower. For front and rear door, rear side and quarter windows as required.

$7.90/ea.
In Stock
Door Weatherstrip w/ Clips (Sponge Rubber Extrusion - General Use)

p/n: 70-1112-73

Door edge weatherstrip made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models.

$7.40/ft.
In Stock
Door Weatherstrip w/ Clips (Sponge Rubber Extrusion - General Use)

p/n: 70-1245-73

Door edge weatherstrip made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models.

$7.20/ft.
In Stock
Run channel mohair liner

p/n: 70-2863-58

Liner, mohair. Liner with a rubber backing. Apply with adhesive to division bars and channels. Helps reline guide bars on lock side of hardtops and convertibles.

$6.39/ft.
In Stock
Peel-N-Stick Trunk Weatherstrip

p/n: 70-0510-WT

Peel-N-Stick Trunk Weatherstrip made from high quality EPDM sponge rubber. 3M Peel-N-Stick backing provides superior adhesion for reliable performance. Makes for an easier installation of deck lid weatherstripping. Also excellent for use in many different applications and on many different vehicle models.

$6.20/ft.
Made to Order Takes 2-3 Days
Trunk Weatherstrip

p/n: 70-0346-85

This weatherstrip was designed from an original part for a specific application but has many uses outside of its original purpose. The seal is structured to be applied to the body of the car.

$6.20/ft.
In Stock
Door Weatherstrip w/o Clips (Sponge Rubber Extrusion - General Use)

p/n: 70-1244-73

Door edge weatherstrip made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models.

$5.90/ft.
In Stock
Trunk Weatherstrip

p/n: 70-0510-85

This weatherstrip was designed from an original part for a specific application but has many uses outside of its original purpose. The seal is structured to be applied to the body of the car.

$5.90/ft.
In Stock
Universal mounting pad

p/n: 70-0308-17

Mounting pad, continuous for lights, hinges, brackets, and other bright work when no molded pad is available.

$5.80/ft.
In Stock
Body hole plug

p/n: 35-0863-45

Plug, body sheet metal holes. Used in various places (like trunks). For one and one half (1-1/2) inch hole in body.

$5.70/ea.
In Stock
Door Weatherstrip w/o Clips (Sponge Rubber Extrusion - General Use)

p/n: 70-1111-73

Door edge weatherstrip made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models.

$5.50/ft.
In Stock
Filler, sash channel, lower

p/n: 70-2844-57

Filler, sash channel, lower

$5.50/ft.
In Stock
Door drain hole seal

p/n: 70-0937-70

Seal, door bottom drain hole.Length: 2.9375 inches.

$5.40/ea.
In Stock
Sash channel filler 1/16 cork

p/n: 70-1115-57

Filler strip, window glass sash channel. One sixteenths (1/16) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherstrip type of filler. This is the highest quality linen back, rubber cork composition on

$4.69/ft.
In Stock
Sash Channel Filler 1/16 Rubber

p/n: 70-2170-57

Filler strip, window glass sash channel. One sixteenths (1/16) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherlip type of filler. This is the highest quality rubber like polymer designed for settin

$4.29/ft.
In Stock
Door or tailgate bumper

p/n: 33-1228-71

Bumper pads, door or tailgate. Twin retainer style. Three eighths (3/8) inch by seven eighths (7/8) inch by one half (1/2) inch high.

$4.20/ea.
In Stock
Sash channel filler 1/32 cork

p/n: 70-1114-57

Filler strip, window glass sash channel. One thirty seconds (1/32) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherlip type of filler. This is the highest quality linen back, rubber cork composition

$3.99/ft.
In Stock
Sash Channel Filler 1/32 Rubber

p/n: 70-2169-57

Filler strip, window glass sash channel. One thirty seconds (1/32) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherlip type of filler.

$3.99/ft.
In Stock
Door bumper

p/n: 33-1227-71

Bumper, door edge, twin retainer style, three eighths (3/8) inch wide by seven eighths (7/8) inch long by three eighths (3/8) inch high.

$3.50/ea.
In Stock
Floor pan plug

p/n: 35-0262-20

Plug, floor pan, rear compartment and body. Up to 12 per car, as required.

$3.30/ea.
In Stock
Trunk bumper

p/n: 33-0293-87

Bumper, trunk and tailgate lid bumper support, on lid.

$2.80/ea.
In Stock
Lock cylinder gasket

p/n: 60-0641-69

Gasket, door or trunk lock cylinder. Exact reproduction

$2.10/ea.
In Stock