Search Results

92 items found matching 1964 Cadillac Series 62 4 door Hardtop - 6 Window
The listing below contains just short, abbreviated descriptions.
Please click on the part name in red in order to get a complete description.
Body Weatherstrip Kit

p/n: 90-3171-90

This kit includes the major weatherstrip components and some other essential parts needed for the body of your restoration project.

$671.20/set
$603.69/set
10% discount
Kit
Rear Window Gasket

p/n: 70-0995-81

This rear window gasket mounts around the full perimeter of the back glass and has properly molded corners for a precise, factory fit.

$199.99/ea.
In Stock
Windshield Gasket

p/n: 70-1286-50

This windshield gasket mounts around the full perimeter of the front glass and has properly molded corners for a precise, factory fit.

$192.99/ea.
Made to Order Takes 2-3 Days
Front Door Vent Window Kit

p/n: 90-0429-90

This front door vent window weatherstrip kit is a four (4) piece set that contains the main vent window seals and division post seals. All of the pieces were designed from original parts for a precise, factory fit.

$193.60/set
$183.79/set
5% discount
Kit
Rear Door Weatherstrip

p/n: 70-0901-72

Rear door edge weatherstrip (6 window 4dr hardtop) This part is the primary door to body weatherstrip. Includes eight (8) clips. Note: this is for 6 window 4dr hardtops (vehicles with rear quarter windows).

$177.19/pr.
In Stock
Motor yaw control arm service

p/n: 70-0943-11

Bumpers, motor yaw control. Revulcanization service only.

$175.39/pr.
Call or Email
Quarter window weatherstrip

p/n: 70-1504-77

Weatherstrip, fixed quarter window. Fully molded like original #4813454-5.

$172.39/pr.
Made to Order Takes 1-2 Days
Hardtop roof rail weatherstrip

p/n: 70-0960-68

Hardtop roof rail weatherstrip (6 window 4dr hardtop). This part fits on the roof of the vehicle and seals the side window when the window is fully raised. Includes four (4) clips. Note: this is for 6 window 4dr hardtops only (vehicles with

$164.49/pr.
In Stock
Prop shaft support service

p/n: 70-0903-27

Support, prop shaft center bearing. Revulcanization service only.

$150.99/ea.
Call or Email
Front Door Vent Window Weatherstrips

p/n: 38-0096-55

These front door vent window weatherstrips are the main seals needed to replace the rubber on your vent windows. They are designed and molded from original parts for superior fitment and seal.

$143.69/pr.
In Stock
Motor mount service

p/n: 70-1015-11

Motor support, rear at transmission. Revulcanization service only.Width: 3.625 inches.

$132.79/ea.
Call or Email
Front Door weatherstrip

p/n: 70-0824-72

Door edge weatherstrip with molded ends. This part is the primary door to body weatherstrip. Includes six (6) clips for easy installation. Made of top quality rubber.

$103.89/pr.
In Stock
Splash apron

p/n: 70-2496-45

Filler, splash apron. Die cut masticated rubber to authentic original dimensions. Includes all factory style holes required for installation.

$77.99/set
In Stock
Fenderskirt Edge Seal

p/n: 70-0154-45

Seal, fenderskirt edge, exact copy, trim notch for skirt lock at installation. Compare sketch with your original to be sure. Two (2), five (5) foot strips.

$70.69/pr.
In Stock
Hood to cowl weatherstrip

p/n: 70-1049-43

Weatherstrip, hood to cowl. Uses our part #70-1250-42, #70-1251-42 & 70-1252-42 (sold separately) to adjust hood.

$68.69/ea.
In Stock
Headlight filler kit

p/n: 70-2788-14

Filler, headlight kit. Die cut masticated rubber to authentic original dimensions. Includes all factory holes required for installation.

$64.69/set
In Stock
Beltline weatherstrip

p/n: 70-0961-60

Weatherstrip, inner beltline. Thick pile lined, without chrome bead. Nine sixteenths (9/16) inch high by nine thirty seconds (9/32) inch thick, two four (4) foot lengths.

$61.39/pr.
In Stock
Front coil spring pad

p/n: 70-2302-35

Pad, front coil spring insulator cushion. Fully molded, mounts at top of front coil springs.

$59.29/pr.
In Stock
1935-1974 Cadillac Factory Parts Manual, CD

p/n: 07-1346-07

This GM Licensed Detroit Iron CD provides the most comprehensive set of digital Cadillac Factory parts manuals. The factory manuals on this CD were professionally scanned from the original service and parts manuals.

$58.29/ea.
Ships in 3-4 Days
Beltline Outer Weatherstrip

p/n: 70-0802-61

Weatherstrip, front door outer beltline "scraper seal" type. Pair of 25" long strips. For models with chrome trim on doors. Plastic guides not included.

$57.39/pr.
In Stock
Door Outer Beltline Weatherstrip

p/n: 70-0803-61

Weatherstrip, rear door outer beltline "scraper seal" type. Plastic guides not included. For models with chrome trim on doors.

$56.59/pr.
In Stock
Lock pillar filler

p/n: 70-0837-79

Rear door lock pillar seal. This part seals the bottom of the rear side window, and may also be known as a door jamb seal. Fully molded authentic rubber construction with metal core. Includes twelve (12) clips for easy installation. Note:

$54.99/pr.
In Stock
Door weatherstrip

p/n: 70-1762-73

Weatherstrip, vertical on lock pillar.Width: .6875 inches. Height: 1.0 inches.

$52.99/pr.
In Stock
Front Stabilizer Bar End Link Kit

p/n: 70-2110-33

Kit, front stabilizer bar link assembly replacement. Twenty-two (22) piece set. One (1) kit for both sides of one (1) car. Hex head bolt. 5/16"-18nc x 6-15/16" lg. Comes with metal sleeve, metal cup washers and rubber grommets.

$52.99/pr.
In Stock
Rigid Run Channel

p/n: 70-0752-58

Window run channel, rigid. Single six (6) foot length. Metal backed, rigid, pile lined, and no bead. For front door and rear door division posts.

$52.89/ea.
In Stock
Beltline weatherstrip 3 foot

p/n: 70-1121-61

Weatherstrip, outer beltline (sometimes called "scraper seal"). For use on front, rear, and quarter windows without a chrome reveal molding at the window beltline. Small stainless bead with rubber lip. Three (3) foot length.

$50.19/pr.
In Stock
Vent division bar weatherstrip

p/n: 70-0859-56

Front vent window division post seal. Fully molded with metal core and attaching tabs.

$49.89/pr.
In Stock
Peel-N-Stick Trunk Weatherstrip

p/n: 70-0773-WT

This trunk weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body. Easy to install 3M Peel-N-Stick backing provides superior adhesion for reliable performance.

$49.59/ea.
In Stock
Side Window Vertical Leading Edge

p/n: 70-0806-80

This Side Window Vertical Leading Edge Weatherstrip pair is designed from the original part for superior fitment and seal. This part attaches to the vertical edge of the rear side windows when the rear side windows are fully raised.

$48.39/pr.
In Stock
Beltline Weatherstrip 6 Foot

p/n: 70-1120-61

Weatherstrip, outer beltline (sometimes called "scraper seal"). For use on front, rear, and quarter windows without a chrome reveal molding at the window beltline. Small stainless bead with rubber lip. Six (6) foot length.

$45.89/ea.
In Stock
Cowl to fender seal

p/n: 70-2790-43

Seal, cowl-to-fender. Die cut masticated rubber to authentic original dimensions. Includes all factory holes required for installation.

$44.89/pr.
In Stock
Window Sash / Beltline Channel

p/n: 70-0651-58

Weatherstrip, window sash channel (beltline), inner. Rigid, rubber covered weatherstrip with flock lining and one fourth (1/4) inch chrome edge. Used on front door, rear door and rear quarter window. Six (6) foot strip.

$43.79/ea.
In Stock
Trunk Weatherstrip

p/n: 70-0773-84

This trunk weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.

$39.59/ea.
In Stock
Lower Corner Gutter

p/n: 70-3555-73

Lower Corner Gutter

$38.49/pr.
In Stock
Rear bumper filler

p/n: 70-3077-30

Filler, rear bumper. Two (2) piece set. Die cut masticated rubber.Length: 15.5 inches.

$33.79/pr.
In Stock
Hood to shroud seal

p/n: 70-2789-43

Seal, hood-to-shroud. Die cut masticated rubber to authentic original dimensions. Attaches to bottom side of hood.

$30.69/ea.
In Stock
Radiator mounting pad

p/n: 70-0963-31

Radiator mounting pad, insulator. Up to four (4) used per car.Length: 6.0 inches.

$26.59/ea.
In Stock
Splash apron

p/n: 70-3084-45

Filler, auxiliary splash apron. Fits below sway bar. Two (2) piece set. Die cut masticated rubber.

$24.39/pr.
In Stock
Metal sleeved grommet

p/n: 70-0203-41

Flanged rubber grommet with metal sleeve bushing. Used as part of the accelerator relay lever. Also used from 1959-61 on all Cadillac models as a bushing for the windshield wiper relay lever adaptor.

$24.29/ea.
In Stock
Body Mount Isolator Pad

p/n: 70-0929-48

Body Mount Isolator Pad - Rubber with metal core and locating collar as original part. Part dimensions = Two and three sixteenths inch (2 3/16") square by one inch (1") overall height with thirteen sixteenths inch (13/16") inside bolt diameter. Does not include any fastener hardware.

$23.29/ea.
In Stock
Door handle gasket kit

p/n: 70-0733-69

Gasket, front and rear outside door handle mounting pad. Six (6) piece set includes rubber washer for handle button for two (2) handles.

$22.79/set
In Stock
Taillight lens gasket

p/n: 70-3089-15

Gasket, taillight lens, outer, in bumper. Two (2) piece set.

$21.29/pr.
In Stock
Battery clamp cover

p/n: 70-0095-21

Cover, battery clamp. Control unsightly sulfate buildup. Help protect the nearby metal and finish. Good copy from original part.Length: 3.5 inches.

$20.39/ea.
In Stock
Cornering lens gasket

p/n: 70-3098-17

Gasket, cornering light lens. Two (2) piece set.

$17.79/pr.
In Stock
Parking light lens gasket

p/n: 70-3095-16

Gasket, signal and parking light lens. Two (2) piece set.

$17.79/pr.
In Stock
Taillight lens gasket

p/n: 70-3088-15

Gasket, taillight lens, in fin. Two (2) piece set.

$17.79/pr.
In Stock
AC condenser mount

p/n: 70-0964-31

Mount, air conditioning condenser. Four (4) used per car.Length: 1.0 inches. Width: .75 inches.

$17.69/ea.
In Stock
License lens gasket

p/n: 70-3097-17

Gasket, license plate light lens. Two (2) piece set.

$14.99/pr.
In Stock
Lock pillar filler

p/n: 70-0834-79

Front door lock pillar seal. This part seals the bottom of the rear side window, and may also be known as a door jamb seal. Fully molded authentic rubber construction with metal core. Includes eight (8) clips for easy installation. Note: o

$13.99/pr.
In Stock
Hood bumper

p/n: 70-0907-42

Bumper, hood front aligning. Correct design with proper screw thread.Height: 2.50 inches.

$12.99/ea.
In Stock
Turn signal lens gasket

p/n: 70-3101-17

Gasket, turn signal indicator "gun sight" lens. Two (2) piece set.

$12.59/pr.
In Stock
Dimmer switch grommet

p/n: 40-0083-88

Grommet, dimmer switch for carpet application.

$11.99/ea.
In Stock
Masticated rubber sheet

p/n: 70-0645-45

Masticated sheet. Three thirty seconds (3/32) inch thick rubber sheet containing random milled cotton cord reinforcement for front end splash aprons, etc. This product is a four (4) foot wide roll, and will only be sold in four (4) square foot multiples

$11.79/sqf
In Stock
Body mounting pad

p/n: 70-2233-48

Pad, body mounting to chassis. Fully molded rubber. One and seven eighths inch (1 7/8") outside diameter by eleven sixteenths inch (11/16") inside hole diameter by nine sixteenths inch (9/16") height.

$11.69/ea.
In Stock
Body mounting pad

p/n: 70-2232-48

Pad, body mounting to chassis. Fully molded rubber. One and seven eighths inch (1 7/8") outside diameter by fifteen sixteenths inch (15/16") inside hole diameter by nine sixteenths inch (9/16") height.

$11.69/ea.
In Stock
Body mounting pad

p/n: 70-2234-48

Pad, body mounting to chassis. Fully molded rubber, square type. Six (6) or more are used per car. Two and three sixteenths inch (2 3/16") square by three fourths inch (3/4") inside diameter hole by one half inch (1/2") inch height.

$11.39/ea.
In Stock
Rear view mirror mounting pad

p/n: 70-3083-70

Gasket, rear view mirror to door.

$10.79/ea.
In Stock
Headlight dimmer switch pad

p/n: 70-0930-14

Pad, headlight dimmer switch. Rubber slip-over cover for floor mounted switch.

$9.69/ea.
In Stock
Trunk lock emblem gasket

p/n: 70-0875-86

Gasket, trunk lock emblem escutcheon. Steel rule die cut rubber of exact profile.Width: 1.875 inches. Height: 1.9375 inches.

$9.69/ea.
In Stock
Taillight lens gasket

p/n: 70-3090-15

Gasket, taillight lens, inner, in bumper. Four (4) piece set.

$8.79/set
In Stock
Window stop stem bumper

p/n: 33-0540-62

Cushion (stem bumper), window stop, lower. For front and rear door, rear side and quarter windows as required.

$8.59/ea.
In Stock
Door Weatherstrip w/ Clips (Sponge Rubber Extrusion - General Use)

p/n: 70-1245-73

Door edge weatherstrip made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models.

$7.89/ft.
In Stock
Run channel mohair liner

p/n: 70-2863-58

Liner, mohair. Liner with a rubber backing. Apply with adhesive to division bars and channels. Helps reline guide bars on lock side of hardtops and convertibles.

$6.99/ft.
In Stock
Peel-N-Stick Trunk Weatherstrip

p/n: 70-0510-WT

Peel-N-Stick Trunk Weatherstrip made from high quality EPDM sponge rubber. 3M Peel-N-Stick backing provides superior adhesion for reliable performance. Makes for an easier installation of deck lid weatherstripping. Also excellent for use in many different applications and on many different vehicle models.

$6.79/ft.
In Stock
Trunk Weatherstrip

p/n: 70-0346-85

This weatherstrip was designed from an original part for a specific application but has many uses outside of its original purpose. The seal is structured to be applied to the body of the car.

$6.79/ft.
In Stock
Door Weatherstrip w/o Clips (Sponge Rubber Extrusion - General Use)

p/n: 70-1244-73

Door edge weatherstrip made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models.

$6.49/ft.
In Stock
Hood bumper

p/n: 70-1082-42

Bumper, hood to fender.

$6.49/ea.
In Stock
Trunk Weatherstrip

p/n: 70-0510-85

This weatherstrip was designed from an original part for a specific application but has many uses outside of its original purpose. The seal is structured to be applied to the body of the car.

$6.49/ft.
In Stock
Universal mounting pad

p/n: 70-0308-17

Mounting pad, continuous for lights, hinges, brackets, and other bright work when no molded pad is available.

$6.39/ft.
In Stock
Body hole plug

p/n: 35-0863-45

Plug, body sheet metal holes. Used in various places (like trunks). For one and one half (1-1/2) inch hole in body.

$6.29/ea.
In Stock
Door Weatherstrip w/o Clips (Sponge Rubber Extrusion - General Use)

p/n: 70-1111-73

Door edge weatherstrip made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models.

$5.99/ft.
In Stock
Stabilizer or shock grommet

p/n: 70-0737-33

Grommet, front stabilizer link or shock absorber. Fully molded rubber. One and one eighths inch (1 1/8") by three eighths inch (3/8") inside hole diameter by seven eighths inch (7/8") height. Use as a front stablizer link for 1946-1970 Cadillac: All mode

$5.99/ea.
In Stock
Door drain hole seal

p/n: 70-0937-70

Seal, door bottom drain hole.Length: 2.9375 inches.

$5.89/ea.
In Stock
Sash channel filler 1/16 cork

p/n: 70-1115-57

Filler strip, window glass sash channel. One sixteenths (1/16) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherstrip type of filler. This is the highest quality linen back, rubber cork composition on

$5.19/ft.
In Stock
Hood Bumper

p/n: 70-1251-42

Bumper, hood to cowl weatherstrip, one fourth (1/4) inch high. For three sixteenths (3/16) inch high see our #70-1250-42.

$4.69/ea.
In Stock
Sash Channel Filler 1/16 Rubber

p/n: 70-2170-57

Filler strip, window glass sash channel. One sixteenths (1/16) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherlip type of filler. This is the highest quality rubber like polymer designed for settin

$4.69/ft.
In Stock
Door or tailgate bumper

p/n: 33-1228-71

Bumper pads, door or tailgate. Twin retainer style. Three eighths (3/8) inch by seven eighths (7/8) inch by one half (1/2) inch high.

$4.59/ea.
In Stock
Filler and cushion strip

p/n: 70-1237-48

Filler and cushion strip, many applications. Five thirty seconds (5/32) inch by one and five eighths (1-5/8) inch.

$4.59/ft.
In Stock
Hood Bumper

p/n: 70-1252-42

Bumper, hood to cowl weatherstrip, five sixteenths (5/16) inch high. For three sixteenths (3/16) inch high see our #70-1250-42.

$4.59/ea.
In Stock
Filler and cushion strip

p/n: 70-1236-48

Filler and cushion strip, many applications. One sixteenth (1/16) inch by one and three eighths (1-3/8) inch.

$4.39/ft.
In Stock
Sash channel filler 1/32 cork

p/n: 70-1114-57

Filler strip, window glass sash channel. One thirty seconds (1/32) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherlip type of filler. This is the highest quality linen back, rubber cork composition

$4.39/ft.
In Stock
Sash Channel Filler 1/32 Rubber

p/n: 70-2169-57

Filler strip, window glass sash channel. One thirty seconds (1/32) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherlip type of filler.

$4.39/ft.
In Stock
Door bumper

p/n: 33-1227-71

Bumper, door edge, twin retainer style, three eighths (3/8) inch wide by seven eighths (7/8) inch long by three eighths (3/8) inch high.

$3.89/ea.
In Stock
Floor pan plug

p/n: 35-0262-20

Plug, floor pan, rear compartment and body. Up to 12 per car, as required.

$3.69/ea.
In Stock
Trunk bumper

p/n: 33-0293-87

Bumper, trunk and tailgate lid bumper support, on lid.

$2.99/ea.
In Stock
Brake adjustment hole plug

p/n: 70-1092-24

Plug, brake adjustment hole. Fits five sixteenths (5/16) inch by one (1) inch slot. Most models with drum brakes.Length: 1.25 inches. Height: .875 inches.

$2.89/ea.
In Stock
Door Bumper

p/n: 70-1622-71

Bumper, door.Width: 1.0625 inches. Height: .75 inches.

$2.89/ea.
In Stock
Hood bumper

p/n: 33-0861-42

Bumper, hood. Top dimension one half (1/2) inch by five eighths (5/8) inch, one eighth (1/8) inch thick.Length: .50 inches. Width: .625 inches.

$2.79/ea.
In Stock
Door Bumper

p/n: 33-1458-71

Bumper, door side. Similar to our #33-1232-71, and #33-1622-71. Compare to original, use as required. Width: 1.0 inch. Height: 1-5/16 inches.

$2.69/ea.
In Stock
Lock cylinder gasket

p/n: 60-0641-69

Gasket, door or trunk lock cylinder. Exact reproduction

$2.39/ea.
In Stock
Glovebox and Fuel Filler Door Bumper

p/n: 33-0127-41

Glovebox and Fuel Filler Door Bumper

$1.49/ea.
In Stock
Standard Bumper

p/n: 33-0128-88

Standard Bumper - Commonly used for fuel filler or glovebox doors.

$1.19/ea.
In Stock