Search Results

53 items found matching 1964 Chevrolet Corvair 900 Monza 2 door Club Coupe
The listing below contains just short, abbreviated descriptions.
Please click on the part name in red in order to get a complete description.
Transmission mount service

p/n: 60-0620-25

Mounts, transmission. Revulcanization service only.

$192.40/pr.
Call or Email
Front Door Vent Window Kit

p/n: 90-0430-90

This front door vent window weatherstrip kit is a four (4) piece set that contains the main vent window seals and division post seals. All of the pieces were designed from original parts for a precise, factory fit.

$196.30/set
$186.50/set
5% discount
Kit
Windshield Gasket

p/n: 60-0503-50

This windshield gasket mounts around the full perimeter of the front glass and has properly molded corners for a precise, factory fit. The side sections have been tapered just like the originals - narrow on top, wider on bottom. This is the only seal on the market available with this tapered shape. It also has the slot to accommodate the outer edge's decorative molding.

$173.30/ea.
In Stock
Front Door Vent Window Weatherstrips

p/n: 38-0097-55

These front door vent window weatherstrips are the main seals needed to replace the rubber on your vent windows. They are designed and molded from original parts for superior fitment and seal.

$150.20/pr.
In Stock
Window felt weatherstrip

p/n: 80-0355-57

Original equipment style side window horizontal seal kit (also known as beltline weatherstrip). Eight (8) piece kit includes inner and outer felt beltline weatherstrip for each door and quarter windows. These strips wipe the side windows when the glas

$149.80/set
Ships in 1-3 Weeks
Window felt weatherstrip

p/n: 80-0354-57

Made from Standard material. Side window horizontal seal (also known as beltline weatherstrip). These strips wipe the side windows when the glass is lowered. They come ready to install with finished ends and body curvature bends for a factory like appeara

$134.80/set
Allow 1-3 Weeks Ships Separately
Rear Window Gasket

p/n: 60-0625-81

This rear window gasket mounts around the full perimeter of the back glass and has properly molded corners for a precise, factory fit.

$120.10/ea.
In Stock
Front Door weatherstrip

p/n: 83-1006-72

Door edge weatherstrip. This part is the primary door to body weatherstrip.

$116.70/pr.
In Stock
Motor mount service

p/n: 60-0676-11

Rear motor mount. Revulcanization service only. Send cores and allow three weeks for service.

$115.80/ea.
Call or Email
Front Stabilizer Kit

p/n: 60-0217-34

Link kit, full replacement, front stabilizer bar link. Twenty-two (22) piece set completely replaces links at both ends of stabilizer bar. Hex head bolt 5/16"-24nf x 7-3/4" long. Comes with metal sleeve, metal cup washers and rubber grommets.

$59.70/set
In Stock
Front suspension bumper

p/n: 60-0677-32

Bumper, front suspension. Molded with side clearances as original.

$54.70/pr.
In Stock
Beltline weatherstrip 3 foot

p/n: 70-1121-61

Weatherstrip, outer beltline (sometimes called "scraper seal"). For use on front, rear, and quarter windows without a chrome reveal molding at the window beltline. Small stainless bead with rubber lip. Three (3) foot length.

$46.40/pr.
In Stock
Vent division bar weatherstrip

p/n: 60-0650-56

Front vent window division post seal. Fully molded with metal core and attaching tabs. This part fits opposite the glass run channel and seals the vent window when the vent is closed. See Front door vent weatherstrip for main rubber seal.

$46.10/pr.
In Stock
Rear Engine Compartment Weatherstrip

p/n: 83-1014-84

This rear engine compartment weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the engine compartment directly to the body.

$45.90/ea.
In Stock
Axle rebound pad

p/n: 60-0678-32

Bumper, rear axle, upper. New production, not an aftermarket replacement.

$45.60/pr.
In Stock
Flexible Run Channel

p/n: 60-0583-58

Glass run channel. Made with an electrostatic flocked rubber that has flexibility and reduces friction to secure and let the glass slide inside the channel. Helps eliminate rattle, provide a smooth sliding surface and protect glass. Sold as 96" strips.

$44.89/ea.
In Stock
Beltline Weatherstrip 6 Foot

p/n: 70-1120-61

Weatherstrip, outer beltline (sometimes called "scraper seal"). For use on front, rear, and quarter windows without a chrome reveal molding at the window beltline. Small stainless bead with rubber lip. Six (6) foot length.

$42.40/ea.
In Stock
Window Sash / Beltline Channel

p/n: 70-0651-58

Weatherstrip, window sash channel (beltline), inner. Rigid, rubber covered weatherstrip with flock lining and one fourth (1/4) inch chrome edge. Used on front door, rear door and rear quarter window. Six (6) foot strip.

$40.50/ea.
In Stock
Fenderskirt edge seal

p/n: 60-0201-45

Seal, fenderskirt edge. Proper profile for most skirts of this period, including Fox-Craft. Sixty (60) inch strip.Length: 60. inches. Width: .75 inches.

$40.00/pr.
In Stock
Engine shroud to body seal

p/n: 70-3791-45

Engine to body seal. Die cut masticated rubber.

$28.90/set
In Stock
Brake master cylinder boot

p/n: 60-0180-24

Boot, brake master cylinder rod. Fits on one and one fourth (1-1/4) inch diameter cylinder. Height: 2.125 inches.

$27.60/ea.
In Stock
Fuel neck grommet

p/n: 70-1439-39

Grommet, fuel filler neck. Fully molded with retaining flange. Easy to install, just pop in. Fits as original. Three and three eighths inch (3-3/8") outside diameter by two inches (2") inside hole diameter by seven eighths inch (7/8") height.

$19.70/ea.
In Stock
Battery clamp cover

p/n: 70-0095-21

Cover, battery clamp. Control unsightly sulfate buildup. Help protect the nearby metal and finish. Good copy from original part.Length: 3.5 inches.

$18.80/ea.
In Stock
Exhaust system hanger

p/n: 60-0308-13

Insulator (support). Muffler/tailpipe system, strap type as original. One and three fourths (1-3/4) inch by three and five eighths (3-5/8) inch.

$13.00/ea.
In Stock
Dimmer switch grommet

p/n: 40-0083-88

Grommet, dimmer switch for carpet application.

$11.00/ea.
In Stock
Gearshift bushing

p/n: 60-0237-24

Bushing, gearshift shaft lever, larger type. Three eighths (3/8) inch inside diameter by nine sixteenths (9/16) inch outside diameter barrel.Height: .

$10.80/ea.
In Stock
Masticated rubber sheet

p/n: 70-0645-45

Masticated sheet. Three thirty seconds (3/32) inch thick rubber sheet containing random milled cotton cord reinforcement for front end splash aprons, etc. This product is a four (4) foot wide roll, and will only be sold in four (4) square foot multiples

$10.80/sqf
In Stock
Hood bumper

p/n: 50-0205-42

Bumper, adjustable type, hood front. Cadmium plated bolt (5/16)-18 x 1-1/4", rubber bumper 1-1/8" in diameter, 5/8" thick.Height: 1.875 inches.

$9.40/ea.
In Stock
Window stop stem bumper

p/n: 33-0540-62

Cushion (stem bumper), window stop, lower. For front and rear door, rear side and quarter windows as required.

$7.90/ea.
In Stock
Door Weatherstrip w/ Clips (Sponge Rubber Extrusion - General Use)

p/n: 70-1112-73

Door edge weatherstrip made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models.

$7.40/ft.
In Stock
Door Weatherstrip w/ Clips (Sponge Rubber Extrusion - General Use)

p/n: 70-1245-73

Door edge weatherstrip made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models.

$7.20/ft.
In Stock
Peel-N-Stick Trunk Weatherstrip

p/n: 70-0510-WT

Peel-N-Stick Trunk Weatherstrip made from high quality EPDM sponge rubber. 3M Peel-N-Stick backing provides superior adhesion for reliable performance. Makes for an easier installation of deck lid weatherstripping. Also excellent for use in many different applications and on many different vehicle models.

$6.20/ft.
Made to Order Takes 2-3 Days
Trunk Weatherstrip

p/n: 70-0346-85

This weatherstrip was designed from an original part for a specific application but has many uses outside of its original purpose. The seal is structured to be applied to the body of the car.

$6.20/ft.
In Stock
Door Weatherstrip w/o Clips (Sponge Rubber Extrusion - General Use)

p/n: 70-1244-73

Door edge weatherstrip made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models.

$5.90/ft.
In Stock
Trunk Weatherstrip

p/n: 70-0510-85

This weatherstrip was designed from an original part for a specific application but has many uses outside of its original purpose. The seal is structured to be applied to the body of the car.

$5.90/ft.
In Stock
Universal mounting pad

p/n: 70-0308-17

Mounting pad, continuous for lights, hinges, brackets, and other bright work when no molded pad is available.

$5.80/ft.
Made to Order Takes 2-3 Days
Body hole plug

p/n: 35-0863-45

Plug, body sheet metal holes. Used in various places (like trunks). For one and one half (1-1/2) inch hole in body.

$5.70/ea.
In Stock
Door Weatherstrip w/o Clips (Sponge Rubber Extrusion - General Use)

p/n: 70-1111-73

Door edge weatherstrip made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models.

$5.50/ft.
In Stock
Shock absorber grommet

p/n: 60-0235-33

Grommet, shock absorber mounting, plain cylinder type with flat ends.

$5.30/ea.
In Stock
Sash channel filler 1/16 cork

p/n: 70-1115-57

Filler strip, window glass sash channel. One sixteenths (1/16) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherstrip type of filler. This is the highest quality linen back, rubber cork composition on

$4.69/ft.
In Stock
Sash Channel Filler 1/16 Rubber

p/n: 70-2170-57

Filler strip, window glass sash channel. One sixteenths (1/16) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherlip type of filler. This is the highest quality rubber like polymer designed for settin

$4.29/ft.
In Stock
Door or tailgate bumper

p/n: 33-1228-71

Bumper pads, door or tailgate. Twin retainer style. Three eighths (3/8) inch by seven eighths (7/8) inch by one half (1/2) inch high.

$4.20/ea.
In Stock
Sash channel filler 1/32 cork

p/n: 70-1114-57

Filler strip, window glass sash channel. One thirty seconds (1/32) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherlip type of filler. This is the highest quality linen back, rubber cork composition

$3.99/ft.
In Stock
Sash Channel Filler 1/32 Rubber

p/n: 70-2169-57

Filler strip, window glass sash channel. One thirty seconds (1/32) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherlip type of filler.

$3.99/ft.
In Stock
Door bumper

p/n: 33-1227-71

Bumper, door edge, twin retainer style, three eighths (3/8) inch wide by seven eighths (7/8) inch long by three eighths (3/8) inch high.

$3.50/ea.
In Stock
Shock absorber bushing

p/n: 70-0547-32

Bushing, shock absorber mounting. Double cone style, rear. Five eighths (5/8) inch hole, one and one sixteenths (1-3/16) inch outside diameter, three fourth (3/4) inch thick.

$3.50/ea.
In Stock
Floor pan plug

p/n: 35-0262-20

Plug, floor pan, rear compartment and body. Up to 12 per car, as required.

$3.30/ea.
In Stock
Trunk floor pan plug

p/n: 35-0070-87

Plug, trunk and floor pan drain hole. Buick 1950-65 Plug, trunk and floor pan drain hole.

$3.20/ea.
In Stock
Brake adjustment hole plug

p/n: 70-1092-24

Plug, brake adjustment hole. Fits five sixteenths (5/16) inch by one (1) inch slot. Most models with drum brakes.Length: 1.25 inches. Height: .875 inches.

$2.60/ea.
In Stock
Door weatherstrip fastener

p/n: 50-0198-73

Fastener, door edge weatherstrip, steel. One half (1/2) inch long, thirteen thirty second (13/32) inch diameter head, black finish.

$2.50/ea.
In Stock
Lock cylinder gasket

p/n: 60-0641-69

Gasket, door or trunk lock cylinder. Exact reproduction

$2.10/ea.
In Stock
Glovebox and Fuel Filler Door Bumper

p/n: 33-0127-41

Glovebox and Fuel Filler Door Bumper

$1.30/ea.
In Stock
Standard Bumper

p/n: 33-0128-88

Standard Bumper - Commonly used for fuel filler or glovebox doors.

$1.00/ea.
In Stock