Search Results
Body Weatherstrip Kit
p/n: 90-3503-90
This ten (10) piece Body Weatherstrip Kit includes the major weatherstrip components needed for the body of your classic restoration vehicle.
Hardtop Roof Rail Weatherstrip
p/n: 20-0097-68
Hardtop roof rail weatherstrip. This part fits on the roof of the vehicle and seals the side window when the window is fully raised.
Window Felt Weatherstrip
p/n: 80-1014-57
Made from Original Style material. Side window horizontal seal (also known as beltline weatherstrip). Eight (8) piece set. This set includes the inner, outer & quarter window seals for all side windows.
Front Door Vent Window Set
p/n: 90-0302-90
This four (4) piece Front Door Vent Window Set contains the main vent window seals and division post seals. All of the pieces were designed from original parts for a precise, factory fit.
Door Weatherstrip
p/n: 20-0104-72
This Door Weatherstrip pair is designed from the original parts for superior fitment and seal. These primary door weatherstrips mount (push pin) to seal the driver and passenger doors when closed.
Windshield Gasket
p/n: 20-0138-50
This Windshield Gasket mounts around the full perimeter of the front glass and has properly molded corners for a precise, factory fit. It also has the slot to accommodate the outer edge's decorative molding.
Front Door Vent Window Weatherstrips
p/n: 20-0105-55
These Front Door Vent Window Weatherstrips are the main seals needed to replace the rubber on your vent windows. They are designed and molded from original parts for superior fitment and seal.
Body To Frame Mounting Pad Set
p/n: 70-4601-48
This all rubber thirty-six (36) piece Body to Frame Mounting Pad set is designed from the original parts for superior fitment and function. These mounting pads are installed between the vehicle frame and the body floor pans.
Spring Shackle Bushing Set
p/n: 20-0083-33
This Spring Shackle Bushing Set is for the front of rear leaf spring. Designed from original parts for a precise, factory fit. Two (2) sets required per car.
Rear Window Gasket
p/n: 20-0096-81
This rear window gasket mounts around the full perimeter of the back glass and has properly molded corners for a precise, factory fit. Fitted gasket provides a formed, seamless seal and accommodates reveal molding.
Spring Shackle Bushing Set
p/n: 20-0066-33
This Spring Shackle Bushing Set is for the rear of rear leaf spring. This set is made with original style rubber bushings. Two (2) sets are required per car.
Side Window Vertical Leading Edge
p/n: 20-0109-80
This Side Window Vertical Leading Edge Weatherstrip pair is designed from the original part for superior fitment and seal. This part attaches to the vertical edge of the rear side windows when the rear side windows are fully raised.
Radiator shroud seal
p/n: 20-0126-31
Seal, bottom of radiator to frame air deflector. Includes special plastic buttons to install.
Transmission mount
p/n: 20-0091-25
Mount, transmission support.Ford Cars 1963-64: 6 cyl. 223 1963: 8 cyl. 260, 289 1964: 8 cyl. 289 with 3 and 4 speed transmission 1964: 8 cyl.
Front Door At Beltline Weatherstrips
p/n: 20-0094-73
This Front Door At Beltline Weatherstrip pair is designed from the original part for superior fitment and seal. This inner dog leg door seal fits at the door front at beltine inner.
Voltage Regulator Cover Shield
p/n: 70-4531-17
This Voltage Regulator Cover Shield is designed from the original part for superior fitment and function. This cover shield is located over and above the voltage regulator.
Hood Bumper Set
p/n: 20-0078-42
This eight (8) piece Hood Bumper set is designed from the original parts for superior fitment and function.
Division Bar Glass Run Channel
p/n: 20-0107-58
This Division Bar Glass Run Channel piece is designed from the original part for superior fitment and function. This rigid run channel fits between the front of the door glass and the back of the vent window. Requires one piece per door, two per vehicle.
Vent division bar weatherstrip
p/n: 20-0106-56
Front vent window division post seal. Fully molded with metal core and attaching tabs.
Trunk Weatherstrip
p/n: 20-0095-84
This Trunk Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.
Brake and clutch pedal pad
p/n: 20-0008-22
Pad, brake and clutch pedal. Slip over type. Automatic transmission and manual brakes.
Fender Skirt Weatherstrip
p/n: 20-0069-44
This Fender Skirt Weatherstrip pair is designed from the original part for superior fitment and seal. This Left and Right edge weatherstrip fits between the rear fender bodywork and the removable fender skirt.
Radiator top seal
p/n: 20-0120-31
Seal, radiator support to top of hood. Includes special plastic button to install.
Hood bumper
p/n: 20-0014-42
Bumpers, hood front to radiator support. Five sixteenths (5/16) inch by twenty four (24) thread.
Radiator top seal
p/n: 20-0127-31
Seal, radiator support to top of radiator. Includes special plastic button to install.
Front Suspension Bumper
p/n: 20-0080-32
Bumper for front suspension upper arm. Measures three eighths (3/8) inch by sixteen (16) by eleven sixteenths with (11/16) inch bolt thread.
Firewall to Hood Weatherstrip - Cowl Lacing
p/n: 70-3137-43
This Firewall to Hood Weatherstrip - Cowl Lacing is designed from the original part for superior fitment and seal. An exact reproduction of the original profile. This weatherstrip installs at the rear of the engine bay to seal between the hood and vehicle body cowl.
Hood bumper
p/n: 20-0041-42
Bumpers, rear of hood to top of fender. Two (2) required per vehicle.Ford Cars 1961-64 Bumpers, rear of hood to top of fender. Requires 2 pair for hood.
Front Stabilizer Bar End Link Kit
p/n: 20-0037-33
This eleven (11) piece Front Stabilizer Bar End Link Kit is designed from original parts so it fits correctly. Two (2) kits / sets required per car as one (1) kit / set services one side of front stabilizer bar.
Door bumper
p/n: 20-0004-71
Bumpers, door. Five eighths (5/8) inch high. Installs on door jamb where rear of door closes against body and on rear lower part of door.
Door bumper
p/n: 20-0003-71
Bumpers, door. Seven sixteenths (7/16) inch high. Fits on door jamb where rear of door closes against body and on rear lower part of door.
Body Hole Plug
p/n: 20-1041-21
Plug, cowl and floor pan. This body plug covers a sheet metal hole that is one and one seven eighths (1-7/8) inch in diameter.
Door bumper
p/n: 20-0067-71
Bumper, door. Installs on back edge of door. Please check your car for quantities required.Usually two (2) to eight (8) per vehicle.