Need Assistance?

We are here to help.

Call 800-447-0849

Search Results

57 items found matching 1965 Buick LeSabre 4 door Hardtop
Body Weatherstrip Kit

p/n: 90-3206-90

This kit includes the major weatherstrip components and some other essential parts needed for the body of your restoration project.

$679.19/set
Kit
Front Door Vent Window Set

p/n: 90-0425-90

This four (4) piece Front Door Vent Window Set contains the main vent window seals and division post seals. All of the pieces were designed from original parts for a precise, factory fit.

$223.19/set
Kit
Rear Door weatherstrip

p/n: 70-1933-72

Door edge weatherstrip. This part is the primary door to body weatherstrip.

$195.39/pr.
Made to Order Takes 5-7 Days
Front Door Weatherstrip

p/n: 60-0704-72

Front door edge weatherstrip with molded ends. This part is the primary seal which seals the door to body. Includes ten (10) pins for easy installation. Made of top quality rubber.

$177.19/pr.
Made to Order Takes 5-7 Days
Front Door Vent Window Weatherstrips

p/n: 38-0091-55

These Front Door Vent Window Weatherstrips are the main seals needed to replace the rubber on your vent windows. They are designed and molded from original parts for superior fitment and seal.

$171.79/pr.
In Stock
Hardtop roof rail weatherstrip

p/n: 27-0066-68

Hardtop roof rail weatherstrip. This part fits on the roof of the vehicle and seals the side window when the window is fully raised.

$171.79/pr.
In Stock
Door to Body Conduit, Power Window Wiring

p/n: 70-1538-70

This Door to Body Conduit set is designed from the original part for superior fitment and function. This is the sheathing conduit for the power windows wiring from the front door to the body through the hinge pillar.

$152.89/set
In Stock
Beltline Weatherstrip

p/n: 70-0961-60

Weatherstrip, inner beltline. Thick pile lined, without chrome bead. Available in 4ft pairs.

$76.59/pr.
In Stock
Vent Window Division Post Run Channels

p/n: 70-0985-58

This Vent Window Division Post Run Channels pair installs on the backside of the vent window division post. Flexible run channel is flock lined with a molded-in upper bumper as original.

$70.89/pr.
In Stock
Beltline Weatherstrips

p/n: 70-1121-61

Weatherstrip, outer beltline. For use on front, rear, and quarter windows without a chrome reveal molding at the window beltline. Available in 3ft pair.

$64.69/pr.
In Stock
Side window leading edge

p/n: 70-0786-80

Side window vertical leading edge weatherstrip.

$63.79/pr.
In Stock
Vent division bar weatherstrip

p/n: 70-0843-56

Front vent window division post seal. Fully molded with metal core and attaching tabs.

$63.19/pr.
In Stock
Beltline Weatherstrip

p/n: 70-1120-61

Weatherstrip, outer beltline. For use on front, rear, and quarter windows without a chrome reveal molding at the window beltline. Available in 6ft lengths.

$59.99/ea.
In Stock
Beltline Weatherstrip Channel - 5 Foot

p/n: 70-0651-58

A five (5) foot length of rigid channel with a flocked rubber lip and a flat stainless bead. Can be used as the inner beltline weatherstrip on front doors, rear doors and quarter windows.

$57.79/ea.
In Stock
U Jamb lock pillar filler

p/n: 70-1816-79

Rear door lock pillar seal. This part seals the bottom of the rear side window, and may also be known as a door jamb seal. Fully molded authentic rubber construction. For rear doors.

$55.59/pr.
In Stock
Peel-N-Stick Trunk Weatherstrip

p/n: 70-0773-WT

This Peel-N-Stick Trunk Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.

$51.19/ea.
In Stock
Hood to cowl weatherstrip

p/n: 70-3420-42

Weatherstrip, hood to cowl.

$50.59/ea.
In Stock
Radiator bracket cushion

p/n: 70-2050-31

Radiator support bracket, insulator, large type. See our #70-2070-31 for small type.

$49.69/pr.
In Stock
Radiator bracket cushion

p/n: 70-2070-31

Radiator support bracket, insulator, small type. See our #70-2050-31 for large type.Length: 4.5 inches.

$49.49/pr.
In Stock
Trunk Weatherstrip

p/n: 70-0773-84

This Trunk Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.

$40.89/ea.
In Stock
Taillight mounting pad

p/n: 70-2166-15

Pad, taillight mounting to rear quarter panel. Proper extrusion cross section like original. Two (2) strips twenty four (24) inch long.Length: 24.0 inches.

$37.99/pr.
In Stock
Transmission Mount

p/n: 70-2058-25

This Transmission Mount is a new aftermarket replacement mount manufactured to meet or exceed factory specifications.. One (1) required per vehicle.

$54.69/ea.
$30.69/ea.
44% discount
Ships in 5-7 Days
Cornering Light Lens Gaskets

p/n: 70-4044-16

This Cornering Light Lens Gasket pair is designed from the original part for superior fitment and seal. These quality reproduction gaskets fit between the front cornering light lens and the front cornering light housing or bezel.

$22.69/pr.
In Stock
Battery clamp cover

p/n: 70-0095-21

Cover, battery clamp. Control unsightly sulfate buildup. Help protect the nearby metal and finish. Good copy from original part.Length: 3.5 inches.

$22.59/ea.
In Stock
Body mounting pad

p/n: 60-0119-48

Pad, body mounting. Rubber original type with metal core, locating collar and metal bolt liner. Two and one eighths inch (2 1/8") outside diameter by three fourths inch (3/4") inside bolt hole diameter by seven eighths inch (7/8") metal bolt outside diame

$21.99/ea.
In Stock
Rocker panel dust shield cover

p/n: 70-2392-45

Cover, rocker panel inner dust shield. Fully molded with proper attaching teeth and flap.

$21.99/pr.
In Stock
Body mounting pad

p/n: 70-2165-48

Pad, body mount, lower bolt retaining. Rubber with metal washer molded in. One and three fourths inch (1 3/4") outside diameter by one inch (1") inside diameter with one half inch (1/2") hole through center of retaining washer that is molded in by seven e

$18.59/ea.
In Stock
Dimmer Switch Grommet

p/n: 40-0083-88

Grommet, dimmer switch for carpet application.

$13.39/ea.
In Stock
Body Mount Isolator

p/n: 50-0507-48

Isolator, body mounting. Fully molded rubber. Two inches (2") outside diameter by seven eighths inch (7/8") inside hole diameter by three fourths inch (3/4") height.

$13.29/ea.
In Stock
Masticated Rubber Sheet

p/n: 70-0645-45

Masticated sheet. Three thirty seconds (3/32) inch thick rubber sheet containing random milled cotton cord reinforcement for front end splash aprons, etc. This product is a four (4) foot wide roll, and will only be sold in four (4) square foot multiples

$13.19/sqf
In Stock
Door Handle Gasket Set

p/n: 60-0640-69

This Door Handle Gasket Set is designed from the original part for superior fitment and seal. This six (6) piece gasket set will do two (2) doors.

$12.79/set
In Stock
Hood bumper

p/n: 50-0205-42

Bumper, adjustable type, hood front. Cadmium plated bolt (5/16)-18 x 1-1/4", rubber bumper 1-1/8" in diameter, 5/8" thick.Height: 1.875 inches.

$11.39/ea.
In Stock
Antenna mount pad

p/n: 50-0559-21

Pad, antenna mounting. Used on models with manual antennas only.

$9.29/ea.
In Stock
Door Weatherstrip w/ Clips (Sponge Rubber Extrusion - General Use)

p/n: 70-1112-73

Door edge weatherstrip made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models. Available by the foot.

$8.89/ft.
In Stock
Door Weatherstrip With Clips

p/n: 70-1245-73

Door edge weatherstrip made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models. Available by the foot.

$8.79/ft.
In Stock
2-5/8" Run Channel Mohair Liner

p/n: 70-2863-58

Run channel liner helps reline guide bars on lock side of hardtops and convertibles. Available by the foot.

$7.89/ft.
In Stock
Peel-N-Stick Trunk Weatherstrip

p/n: 70-0510-WT

This Peel-N-Stick Trunk Weatherstrip is made from a high-quality EPDM sponge rubber. Available by the foot.

$7.69/ft.
In Stock
Trunk Weatherstrip

p/n: 70-0346-85

Designed from an original part for a specific application but has many uses outside of its original purpose. Available by the foot.

$7.69/ft.
In Stock
Door Weatherstrip Without Clips

p/n: 70-1244-73

Door edge weatherstrip made from high-quality EPDM sponge rubber. Excellent for use on many different vehicle models. Available by the foot.

$7.29/ft.
In Stock
Hood Bumper

p/n: 70-1963-42

Bumper, hood to fender. Measures 11/16" by 7/8"

$7.29/ea.
In Stock
Trunk Weatherstrip

p/n: 70-0510-85

Designed from an original part for a specific application but has many uses outside of its original purpose. Available by the foot.

$7.29/ft.
In Stock
1/4" Universal Mounting Pad

p/n: 70-0308-17

Mounting pad, continuous for lights, hinges, brackets, and other bright work when no molded pad is available. Available by the foot.

$7.19/ft.
In Stock
2" Sash channel filler strip

p/n: 70-1693-57

Filler, door window, lower window sash. Use as required for windows with bolt-on sash channels. Available by the foot.

$7.19/ft.
In Stock
Door drain hole seal

p/n: 70-0938-70

Seal, door bottom drain hole.Length: 3.5 inches.

$7.19/ea.
In Stock
2-1/4" Body Hole Plug

p/n: 35-0863-45

Plug, body sheet metal holes. Used in various places (like trunks). For one and one half (1-1/2) inch hole in body.

$6.99/ea.
In Stock
Door Weatherstrip With Out Clips (Sponge Rubber Extrusion - General Use)

p/n: 70-1111-73

Door edge weatherstrip made from high-quality EPDM sponge rubber. Excellent for use on many different vehicle models. Available by the foot.

$6.79/ft.
In Stock
1/16" Cork Sash Channel Filler

p/n: 70-1115-57

Cork sash channel filler. Available by the foot.

$5.99/ft.
In Stock
1/16" Sash Channel Filler

p/n: 70-2170-57

Sash channel filler. Available by the foot.

$5.19/ft.
In Stock
Door or Tailgate Bumper

p/n: 33-1228-71

Bumper pads, door or tailgate. Twin retainer style.

$5.19/ea.
In Stock
1/32" Cork Sash Channel Filler

p/n: 70-1114-57

Sash channel filler. Cork. Available by the foot.

$4.99/ft.
In Stock