Need Assistance?

We are here to help.

Call 800-447-0849

Search Results

78 items found matching 1965 Cadillac Series 75 4 door Sedan
Front Door Vent Window Set

p/n: 90-0436-90

This front door vent window weatherstrip set is a four (4) piece set that contains the main vent window seals and division post seals. All of the pieces were designed from original parts for a precise, factory fit.

$236.49/set
Kit
Front Motor Mount Revulcanizing Service

p/n: 70-0548-11

This Front Motor Mount revulcanizing service replaces the rubber in your original Motor Mounts to make them like new again. The process is designed for the original factory mounts only. Send in cores and allow three weeks for service.

$224.19/pr.
Call to order
Front Door Vent Window Weatherstrips

p/n: 38-0103-55

These front door vent window weatherstrips are the main seals needed to replace the rubber on your vent windows. They are designed and molded from original parts for superior fitment and seal.

$196.99/pr.
Made to Order Takes 5-7 Days
Motor yaw control arm service

p/n: 70-0943-11

Bumpers, motor yaw control. Revulcanization service only.

$186.29/pr.
Call or Email
Windshield Gasket

p/n: 70-1005-50

This windshield gasket mounts around the full perimeter of the front glass and has properly molded corners for a precise, factory fit.

$177.69/ea.
Made to Order Takes 5-7 Days
Prop shaft support service

p/n: 70-0748-27

Bearing support bracket assembly, drive shaft center bearing. Revulcanization service only. .

$165.19/ea.
Call or Email
Cadillac Master Parts List 1964 - 1969 (Reprint)

p/n: 07-1444-07

This 1964-1969 Cadillac Master Parts List - Two (2) Volume set licensed Detroit Iron reprint provides the most comprehensive repair information in paper format. This OEM PARTS manual reproduction provides detailed original part numbers, part assembly diagrams / illustrations and part textual details for all vehicle subsystems. This information set is a high quality reproduction of the exact parts manual originally published for use by Cadillac dealer mechanics.

$144.49/set
Ships in 5-7 Days
Transmission mount service

p/n: 70-0804-11

Mount, transmission. Revulcanization service only.

$139.39/ea.
Call or Email
Cowl drain gutter

p/n: 70-0867-73

Gutter, cowl side drain, left and right. Rubber with metal core as original. Eleven (11") inches long.Length: 11.0 inches.

$121.99/pr.
In Stock
Defroster Vent Gasket

p/n: 70-2279-31

Gasket, defroster vent at base of windshield. One (1) pair required per car.

$111.69/pr.
In Stock
Splash Apron / A-Arm Dust Shield Set

p/n: 70-2497-45

This eight (8) piece Splash Apron / A-Arm Dust Shield set is designed from the original part for superior fitment and seal. Filler pieces are die cut from quality masticated rubber to authentic original dimensions. Pieces fit over suspension a-arms and inside front inner fenders.

$77.29/set
In Stock
Beltline Weatherstrip

p/n: 70-0961-60

Weatherstrip, inner beltline. Thick pile lined, without chrome bead. Available in 4ft pairs.

$76.59/pr.
In Stock
Hood To Cowl Weatherstrip

p/n: 70-1019-42

This Hood To Cowl Weatherstrip is designed from the original part for superior fitment and seal. An exact reproduction of the original profile. This seal mounts at the rear of the engine bay to seal between the hood and vehicle body cowl.

$73.69/ea.
In Stock
Front Bumper To Radiator Filler

p/n: 70-2777-45

This single piece Front Bumper To Radiator Filler is designed from the original part for superior fitment and function. Filler piece is die cut from quality masticated rubber to authentic original dimensions.

$69.49/ea.
In Stock
Beltline Weatherstrips

p/n: 70-1121-61

Weatherstrip, outer beltline. For use on front, rear, and quarter windows without a chrome reveal molding at the window beltline. Available in 3ft pair.

$64.69/pr.
In Stock
Front coil spring pad

p/n: 70-2302-35

Pad, front coil spring insulator cushion. Fully molded, mounts at top of front coil springs.

$63.69/pr.
In Stock
1935-1974 Cadillac Factory Parts Manual, CD

p/n: 07-1346-07

This GM Licensed Detroit Iron CD provides the most comprehensive set of digital Cadillac Factory parts manuals. The factory manuals on this CD were professionally scanned from the original service and parts manuals.

$62.59/ea.
Beltline Weatherstrip

p/n: 70-1120-61

Weatherstrip, outer beltline. For use on front, rear, and quarter windows without a chrome reveal molding at the window beltline. Available in 6ft lengths.

$59.99/ea.
In Stock
Beltline Weatherstrip Channel - 5 Foot

p/n: 70-0651-58

A five (5) foot length of rigid channel with a flocked rubber lip and a flat stainless bead. Can be used as the inner beltline weatherstrip on front doors, rear doors and quarter windows.

$57.79/ea.
In Stock
Beltline Weatherstrip - 3 Foot, Pair

p/n: 70-0749-60

Window felt inner. Rigid, flocked rubber lip, with flat stainless bead. Available in 3ft pair.

$56.89/pr.
In Stock
Front Stabilizer Bar End Link Kit

p/n: 70-2110-33

Kit, front stabilizer bar link assembly replacement. Twenty-two (22) piece set. One (1) kit for both sides of one (1) car. Hex head bolt. 5/16"-18nc x 6-15/16" lg. Comes with metal sleeve, metal cup washers and rubber grommets.

$56.89/pr.
In Stock
Vent division bar weatherstrip

p/n: 70-1014-56

Front vent window division post seal. Fully molded with metal core and attaching tabs.

$51.99/pr.
In Stock
Peel-N-Stick Trunk Weatherstrip

p/n: 70-0773-WT

This Peel-N-Stick Trunk Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.

$51.19/ea.
In Stock
Body / Cowl To Fender Seals

p/n: 70-2790-43

This Body / Cowl to Fender Seals pair is designed from the original part for superior fitment and function. Filler seal pieces are die cut from quality masticated rubber to authentic original dimensions.

$49.49/pr.
In Stock
Suspension arm bumper

p/n: 70-1021-32

Bumper, front or rear suspension, upper. Uses two (2) per car on front suspension, one (1) per car on rear.

$41.29/ea.
In Stock
Trunk Weatherstrip

p/n: 70-0773-84

This Trunk Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.

$40.89/ea.
In Stock
Radiator mounting pad

p/n: 70-0963-31

Radiator mounting pad, insulator. Up to four (4) used per car.Length: 6.0 inches.

$29.49/ea.
In Stock
Metal sleeved grommet

p/n: 70-0203-41

Flanged rubber grommet with metal sleeve bushing. Used as part of the accelerator relay lever. Also used from 1959-61 on all Cadillac models as a bushing for the windshield wiper relay lever adaptor.

$26.89/ea.
In Stock
Body Mount Isolator Pad

p/n: 70-0929-48

Body Mount Isolator Pad - Rubber with metal core and locating collar as original part. Part dimensions = Two and three sixteenths inch (2 3/16") square by one inch (1") overall height with thirteen sixteenths inch (13/16") inside bolt diameter. Does not include any fastener hardware.

$25.79/ea.
In Stock
Door Handle Gasket Set

p/n: 70-0925-69

This Door Handle Gasket Set is designed from the original part for superior fitment and seal. This six (6) piece gasket set will do two (2) doors.

$25.29/set
In Stock
Taillight Lens Gaskets - In Bumper

p/n: 70-3089-15

This Taillight Lens Gasket pair is designed from the original part for superior fitment and seal. This reproduction gasket fits between the outer taillight lens & taillight housing in bumper.

$23.69/pr.
In Stock
Battery clamp cover

p/n: 70-0095-21

Cover, battery clamp. Control unsightly sulfate buildup. Help protect the nearby metal and finish. Good copy from original part.Length: 3.5 inches.

$22.59/ea.
In Stock
AC condenser mount

p/n: 70-0964-31

Mount, air conditioning condenser. Four (4) used per car.Length: 1.0 inches. Width: .75 inches.

$19.69/ea.
In Stock
Cornering Light Lens Gaskets

p/n: 70-3098-17

This Cornering Light Lens Gasket pair is designed from the original part for superior fitment and seal. These quality reproduction gaskets fit between the cornering light lens and the cornering light housing or bezel.

$19.69/pr.
In Stock
Taillight Lens Gaskets - In Fin

p/n: 70-3088-15

This Taillight Lens Gasket pair is designed from the original part for superior fitment and seal. These reproduction gaskets fit between the taillight lens & taillight housing in fin.

$19.69/pr.
In Stock
Hood bumper

p/n: 70-0770-42

Bumper, fender to hood. Correct detail with ridges as original. Four (4) required per car.Length: 1.3125 inches.

$17.19/ea.
In Stock
License Plate Light Lens Gaskets

p/n: 70-3097-17

This License Plate Light Lens Gasket pair is designed from the original part for superior fitment and seal. This reproduction gasket fits between the License Plate Light Lens and the License Plate Light Housing or Bezel.

$16.59/pr.
In Stock
Hood bumper

p/n: 70-0907-42

Bumper, hood front aligning. Correct design with proper screw thread.Height: 2.50 inches.

$14.49/ea.
In Stock
Turn Signal Indicator Lens Gaskets

p/n: 70-3101-17

This Turn Signal Indicator (on fender top) Lens Gasket pair is designed from the original part for superior fitment and seal. As used for lens on fender top "gun sight" turn signal indicators. Made of high quality, ozone resistant materials.

$13.99/pr.
In Stock
Dimmer Switch Grommet

p/n: 40-0083-88

Grommet, dimmer switch for carpet application.

$13.39/ea.
In Stock
Masticated Rubber Sheet

p/n: 70-0645-45

Masticated sheet. Three thirty seconds (3/32) inch thick rubber sheet containing random milled cotton cord reinforcement for front end splash aprons, etc. This product is a four (4) foot wide roll, and will only be sold in four (4) square foot multiples

$13.19/sqf
In Stock
Body Mount Isolator

p/n: 70-2232-48

Isolator, body mounting to chassis. Fully molded rubber. One and seven eighths inch (1 7/8") outside diameter by fifteen sixteenths inch (15/16") inside hole diameter by nine sixteenths inch (9/16") height.

$12.99/ea.
In Stock
Body mounting pad

p/n: 70-2233-48

Pad, body mounting to chassis. Fully molded rubber. One and seven eighths inch (1 7/8") outside diameter by eleven sixteenths inch (11/16") inside hole diameter by nine sixteenths inch (9/16") height.

$12.99/ea.
In Stock
Body mounting pad

p/n: 70-2234-48

Pad, body mounting to chassis. Fully molded rubber, square type. Six (6) or more are used per car. Two and three sixteenths inch (2 3/16") square by three fourths inch (3/4") inside diameter hole by one half inch (1/2") inch height.

$12.79/ea.
In Stock
Instrument panel grommet

p/n: 70-1654-88

Grommet, instrument panel to windshield frame. Two (2) to six (6) required.Length: 1.3125 inches. Width: 1.0625 inches.

$11.19/ea.
In Stock
Headlight dimmer switch pad

p/n: 70-0930-14

Pad, headlight dimmer switch. Rubber slip-over cover for floor mounted switch.

$10.89/ea.
In Stock
Trunk lock emblem gasket

p/n: 70-0875-86

Gasket, trunk lock emblem escutcheon. Steel rule die cut rubber of exact profile.Width: 1.875 inches. Height: 1.9375 inches.

$10.89/ea.
In Stock
$9.89/set
In Stock
Door Weatherstrip w/ Clips (Sponge Rubber Extrusion - General Use)

p/n: 70-1112-73

Door edge weatherstrip made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models. Available by the foot.

$8.89/ft.
In Stock
Door Weatherstrip With Clips

p/n: 70-1245-73

Door edge weatherstrip made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models. Available by the foot.

$8.79/ft.
In Stock