Search Results

59 items found matching 1966 Chevrolet Chevy II Nova 2 door Hardtop
The listing below contains just short, abbreviated descriptions.
Please click on the part name in red in order to get a complete description.
Body Weatherstrip Kit

p/n: 90-2117-90

This kit includes the major weatherstrip components needed for the body of your restoration project.

$307.00/set
$276.30/set
10% discount
Kit
Window felt weatherstrip

p/n: 80-0462-57

Original equipment style side window horizontal seal kit (also known as beltline weatherstrip). Eight (8) piece kit includes inner and outer felt beltline weatherstrip for each door and quarter windows. These strips wipe the side windows when the glass is

$204.30/set
Allow 1-3 Weeks Ships Separately
Front Door Vent Window Weatherstrip Set

p/n: 82-0147-55

This front door vent window weatherstrip set is a four (4) piece set that contains the main vent window seals and division post seals. All of the pieces were designed from original parts for a precise, factory fit. The division post seals contain a metal core for durability and easy installation.

$171.20/pr.
In Stock
Window felt weatherstrip

p/n: 80-0293-57

Side window horizontal seal (also known as beltline weatherstrip). These strips wipe the side windows when the glass is lowered. They come ready to install with finished ends and body curvature bends for a factory like appearance, however they are made fr

$148.60/set
Allow 1-3 Weeks Ships Separately
Windshield Gasket

p/n: 60-0480-50

This windshield gasket mounts around the full perimeter of the front glass and has properly molded corners for a precise, factory fit. It also has the slot to accommodate the outer edge's decorative molding.

$145.00/ea.
In Stock
Front Door weatherstrip

p/n: 82-0096-72

Door edge weatherstrip. This part is the primary door to body weatherstrip.

$135.70/pr.
In Stock
Roof Rail Weatherstrip - Hardtop

p/n: 82-0098-68

Roof Rail Weatherstrip - Molded Roof Rail Seals, for 2-Door Hardtop. A right and left pair of weatherstrip seals.

$135.70/pr.
In Stock
Front suspension bumper

p/n: 70-1463-32

Bumper, lower arm coil spring. Top quality rubber with steel core.Width: 2.25 inches. Height: 1.875 inches.

$104.50/pr.
In Stock
Motor Mount

p/n: 60-0462-11

Front motor mount. Six (6) cylinder models only.

$71.60/ea.
In Stock
Engine Mounts - S/B Chevrolet

p/n: 70-1633-11

Engine Mounts, front pair. Three (3) bolt S/B Chevrolet. New replacement part manufactured to meet or exceed factory specifications.

$60.70/pr.
In Stock
Run channel upper bumper

p/n: 70-2114-62

Bumper, side window upper division post run channel.Width: 1.25 inches. Height: .50 inches.

$58.60/pr.
In Stock
Beltline Weatherstrip

p/n: 70-0749-60

Window Felt Inner - One (1) pair of three (3) foot lengths. Rigid, flocked rubber lip, with flat stainless bead. For front door, rear door and quarter windows.

$50.90/pr.
In Stock
Rigid Run Channel

p/n: 70-0752-58

Window run channel, rigid. Single six (6) foot length. Metal backed, rigid, pile lined, and no bead. For front door and rear door division posts.

$50.79/ea.
In Stock
Transmission Mount

p/n: 70-2058-25

Transmission mount, rear. One (1) required per vehicle. Aftermarket replacement type.

$47.10/ea.
In Stock
Beltline weatherstrip 3 foot

p/n: 70-1121-61

Weatherstrip, outer beltline (sometimes called "scraper seal"). For use on front, rear, and quarter windows without a chrome reveal molding at the window beltline. Small stainless bead with rubber lip. Three (3) foot length.

$46.40/pr.
In Stock
Peel-N-Stick Trunk Weatherstrip

p/n: 70-0774-WT

This trunk weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body. Easy to install 3M Peel-N-Stick backing provides superior adhesion for reliable performance.

$45.60/ea.
In Stock
Flexible Run Channel

p/n: 60-0583-58

Glass run channel. Made with an electrostatic flocked rubber that has flexibility and reduces friction to secure and let the glass slide inside the channel. Helps eliminate rattle, provide a smooth sliding surface and protect glass. Sold as 96" strips.

$44.89/ea.
In Stock
U Jamb lock pillar filler

p/n: 70-2757-79

Door lock pillar seal. This part seals the bottom of the rear side window, and may also be known as a door jamb seal.

$44.60/pr.
In Stock
Axle rebound pad

p/n: 70-1619-32

Bumper, rear axle.Width: 1.5625 inches. Height: 2.50 inches.

$42.90/pr.
In Stock
Beltline Weatherstrip 6 Foot

p/n: 70-1120-61

Weatherstrip, outer beltline (sometimes called "scraper seal"). For use on front, rear, and quarter windows without a chrome reveal molding at the window beltline. Small stainless bead with rubber lip. Six (6) foot length.

$42.40/ea.
In Stock
Body bumper kit

p/n: 90-0214-90

Kit, hood, door and trunk bumpers. Includes twelve (12) pieces.

$47.00/set
$42.30/set
10% discount
Kit
Side window leading edge

p/n: 82-0149-80

Side window vertical leading edge weatherstrip.

$41.10/pr.
In Stock
Window Sash / Beltline Channel

p/n: 70-0651-58

Weatherstrip, window sash channel (beltline), inner. Rigid, rubber covered weatherstrip with flock lining and one fourth (1/4) inch chrome edge. Used on front door, rear door and rear quarter window. Six (6) foot strip.

$40.50/ea.
In Stock
Trunk Weatherstrip

p/n: 70-0774-84

This trunk weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.

$35.60/ea.
In Stock
Brake master cylinder boot

p/n: 60-0180-24

Boot, brake master cylinder rod. Fits on one and one fourth (1-1/4) inch diameter cylinder. Height: 2.125 inches.

$27.60/ea.
In Stock
Firewall to fender dust shield

p/n: 70-3491-45

Firewall to fender dust shield

$25.70/pr.
In Stock
Body bumper kit

p/n: 90-0209-90

Kit includes four (4) door bumpers.

$21.60/set
$19.40/set
10% discount
Kit
Battery clamp cover

p/n: 70-0095-21

Cover, battery clamp. Control unsightly sulfate buildup. Help protect the nearby metal and finish. Good copy from original part.Length: 3.5 inches.

$18.80/ea.
In Stock
Bumper, rear axle

p/n: 70-1618-32

One rear axle rubber bumper. Width: 1.625 inches.

$17.70/ea.
In Stock
Exhaust system hanger

p/n: 60-0308-13

Insulator (support). Muffler/tailpipe system, strap type as original. One and three fourths (1-3/4) inch by three and five eighths (3-5/8) inch.

$13.00/ea.
In Stock
Dimmer switch grommet

p/n: 40-0083-88

Grommet, dimmer switch for carpet application.

$11.00/ea.
In Stock
Masticated rubber sheet

p/n: 70-0645-45

Masticated sheet. Three thirty seconds (3/32) inch thick rubber sheet containing random milled cotton cord reinforcement for front end splash aprons, etc. This product is a four (4) foot wide roll, and will only be sold in four (4) square foot multiples

$10.80/sqf
In Stock
Door handle gasket kit

p/n: 60-0640-69

Gasket set, outside door handle. Six (6) piece set for two (2) doors.

$10.50/set
In Stock
Steering column at floor seal

p/n: 70-3499-36

Steering column at floor seal

$10.00/ea.
In Stock
Glovebox link bumper

p/n: 50-0367-88

Bumper, glove box check link. Fits on glove box door arm as needed.Length: .75 inches. Width: .5625 inches. Height: .3125 inches.

$7.90/ea.
In Stock
Door Weatherstrip w/ Clips (Sponge Rubber Extrusion - General Use)

p/n: 70-1112-73

Door edge weatherstrip made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models.

$7.40/ft.
In Stock
Door Weatherstrip w/ Clips (Sponge Rubber Extrusion - General Use)

p/n: 70-1245-73

Door edge weatherstrip made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models.

$7.20/ft.
In Stock
Hood bumper

p/n: 70-2610-42

Bumper, hood side on fender ledge. Two (2) required per vehicle. Excellent appearance with all authentic details like orginal.

$6.60/ea.
In Stock
License Plate Light Lens Gasket

p/n: 70-3497-17

This License Plate Light Lens Gasket is designed from the original part for superior fitment and seal. Die cut to original specifications.

$6.60/ea.
In Stock
Run channel mohair liner

p/n: 70-2863-58

Liner, mohair. Liner with a rubber backing. Apply with adhesive to division bars and channels. Helps reline guide bars on lock side of hardtops and convertibles.

$6.39/ft.
In Stock
Inner fender seal

p/n: 60-0667-45

Seal, inner fender to frame. Extruded rubber strip replacement, sold by the foot.

$6.30/ft.
In Stock
Peel-N-Stick Trunk Weatherstrip

p/n: 70-0510-WT

Peel-N-Stick Trunk Weatherstrip made from high quality EPDM sponge rubber. 3M Peel-N-Stick backing provides superior adhesion for reliable performance. Makes for an easier installation of deck lid weatherstripping. Also excellent for use in many different applications and on many different vehicle models.

$6.20/ft.
Made to Order Takes 2-3 Days
Trunk Weatherstrip

p/n: 70-0346-85

This weatherstrip was designed from an original part for a specific application but has many uses outside of its original purpose. The seal is structured to be applied to the body of the car.

$6.20/ft.
In Stock
Door Weatherstrip w/o Clips (Sponge Rubber Extrusion - General Use)

p/n: 70-1244-73

Door edge weatherstrip made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models.

$5.90/ft.
In Stock
Trunk Weatherstrip

p/n: 70-0510-85

This weatherstrip was designed from an original part for a specific application but has many uses outside of its original purpose. The seal is structured to be applied to the body of the car.

$5.90/ft.
In Stock
Universal mounting pad

p/n: 70-0308-17

Mounting pad, continuous for lights, hinges, brackets, and other bright work when no molded pad is available.

$5.80/ft.
Made to Order Takes 2-3 Days
Body hole plug

p/n: 35-0863-45

Plug, body sheet metal holes. Used in various places (like trunks). For one and one half (1-1/2) inch hole in body.

$5.70/ea.
In Stock
Door Weatherstrip w/o Clips (Sponge Rubber Extrusion - General Use)

p/n: 70-1111-73

Door edge weatherstrip made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models.

$5.50/ft.
In Stock
Shock absorber grommet

p/n: 60-0235-33

Grommet, shock absorber mounting, plain cylinder type with flat ends.

$5.30/ea.
In Stock
Door or tailgate bumper

p/n: 33-1228-71

Bumper pads, door or tailgate. Twin retainer style. Three eighths (3/8) inch by seven eighths (7/8) inch by one half (1/2) inch high.

$4.20/ea.
In Stock
Door bumper

p/n: 33-1227-71

Bumper, door edge, twin retainer style, three eighths (3/8) inch wide by seven eighths (7/8) inch long by three eighths (3/8) inch high.

$3.50/ea.
In Stock
Floor pan plug

p/n: 35-0262-20

Plug, floor pan, rear compartment and body. Up to 12 per car, as required.

$3.30/ea.
In Stock
Trunk floor pan plug

p/n: 35-0070-87

Plug, trunk and floor pan drain hole. Buick 1950-65 Plug, trunk and floor pan drain hole.

$3.20/ea.
In Stock
Trunk bumper

p/n: 33-0293-87

Bumper, trunk and tailgate lid bumper support, on lid.

$2.80/ea.
In Stock
Brake adjustment hole plug

p/n: 70-1092-24

Plug, brake adjustment hole. Fits five sixteenths (5/16) inch by one (1) inch slot. Most models with drum brakes.Length: 1.25 inches. Height: .875 inches.

$2.60/ea.
In Stock
Door weatherstrip fastener

p/n: 50-0198-73

Fastener, door edge weatherstrip, steel. One half (1/2) inch long, thirteen thirty second (13/32) inch diameter head, black finish.

$2.50/ea.
In Stock
Lock cylinder gasket

p/n: 60-0641-69

Gasket, door or trunk lock cylinder. Exact reproduction

$2.10/ea.
In Stock
Glovebox and Fuel Filler Door Bumper

p/n: 33-0127-41

Glovebox and Fuel Filler Door Bumper

$1.30/ea.
In Stock
Standard Bumper

p/n: 33-0128-88

Standard Bumper - Commonly used for fuel filler or glovebox doors.

$1.00/ea.
In Stock