Search Results
Front Door Vent Window Weatherstrips
p/n: 20-0893-55
These front door vent window seals are designed from the original parts for superior fitment and seal. The pieces are molded as left and right and are one piece with the division post seal.
Windshield Gasket
p/n: 20-0890-50
This windshield gasket mounts around the full perimeter of the front glass and has properly molded corners for a precise, factory fit. It also has the slot to accommodate the outer edge's decorative molding.
Windshield Gasket without Groove
p/n: 20-0803-50
This Windshield Gasket without Groove mounts around the full perimeter of the front glass and has properly molded corners for a precise, factory fit. This seal does not have the slot to accommodate the outer edge's decorative chrome reveal molding.
Window Felt and Run Channel Set
p/n: 20-0899-58
This eight (8) piece Window Felt and Run Channel set is designed from the original part for superior fitment and function. This front door glass "anti-rattler" set includes one (1) pair of flexible run channels and inner / outer beltline weatherstrips with stainless steel bead.
Side Window Weatherstrip Set
p/n: 20-0898-58
This comprehensive, eight (8) piece, Side Window Weatherstrip set is designed from the original parts for superior fitment and seal. The anti-rattler set includes the window felt "anti-rattler" black bead beltline weatherstrips, door glass run channels and glass division bars.
Radiator Mounting Pad Set
p/n: 20-0772-31
This eighteen (18) piece Radiator Mounting Pad Set is designed from the original parts for a factory like appearance and function. This set fits F100 2-wheel drive models, but will work for F-250 and F-350 models by adding extra metal washers.
Rear Window Gasket
p/n: 20-0911-81
This rear window gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the back glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation.
Front Door Weatherstrip
p/n: 20-0908-72
This front door weatherstrip pair is designed from the original parts for superior fitment and seal. These door seals mount directly to the body to seal against the full perimeter of both the front left and front right doors.
Window Felt Beltline Weatherstrips
p/n: 80-0644-57
This is an Original equipment style side window horizontal weatherstrip set (also known as beltline weatherstrip). This four (4) piece with black bead anti-rattler set includes inner and outer window felt beltline weatherstrips for each door side window.
Window Felt Weatherstrip
p/n: 80-0643-57
Original equipment style side window horizontal seal kit. Made with stainless steel bead. Kit includes inner and outer felt beltline weatherstrip for each door and quarter windows.
1968 Ford Truck And Van Factory Shop Manual, CD
p/n: 07-1247-07
This FORD-Licensed Detroit Iron CD contains the most comprehensive set of digital OEM shop manuals. The factory manuals on this CD were professionally scanned from the original service and parts manuals.
Clutch Release Lever Boot
p/n: 20-0761-24
This Clutch Release Lever Boot is designed from the original part for superior fitment and seal. This boot is for the clutch release lever to clutch housing.
Axle rebound pad
p/n: 20-0647-32
Bumper, rear axle. Two (2) required per Truck. 1965-72: F100, F350 2 W/D (wheel drive), F100, F250 4 W/D (wheel drive).
Steering Column Floor Seal
p/n: 20-0785-36
This Steering Column Floor Seal is designed from the original part for superior fitment and seal. Restores the cab to floor sealing against the outside elements. For Manual Steering models.
Motor Mount
p/n: 20-0602-11
Rear motor mount. Useage: 1965-72: Fits F100, F250 4x2s Manual Trans. 8 cyl. 302, 352, 360, 390; F100, F250 4x2s Manual Trans. 8 cyl. 240, 300; F100, F250 all 6 cyl.
Brake and clutch shank seal
p/n: 20-0850-23
Seal, clutch rod to floor. Rubber with metal. Useage: 1968-71: F100-350 Series before Serial #M00,001.
Accelerator Pedal Pad
p/n: 20-1075-40
This Accelerator Pedal Pad is made of top-quality EPDM rubber with a high level of fit and finish. Designed to be a direct fit reproduction.
Splash Apron Fender Seal
p/n: 20-0877-44
Seals, front fender apron to cab mount strip. Made of high quality EPDM rubber and to the original design for a factory like fit.
Firewall To Hood Weatherstrip - Cowl Lacing
p/n: 20-0790-42
This Firewall to Hood Weatherstrip is made of high quality EPDM dense rubber and to the original design for a factory like fit and appearance. Comes with pre-drilled mounting holes and mounting clips installed.
Fender Welting
p/n: 20-1591-44
This black Fender Welting is designed from the original part for superior fitment and seal. This welting material fits between the fenders and the vehicle body. Eight (8) foot length.
Standard bumper
p/n: 20-0907-71
Bumpers, dual useage. Used on the rear of the hood for 1966-67: Fairlane & Ranchero. Used as a liftgate bumper for 1966-77: U-Series Bronco. Use on the door for 1967-72: F100-750 Series trucks.
Hood bumper
p/n: 20-0875-42
Bumpers, hood side. 1967-69 needs 1 pr. per truck, 1970-72 needs 2 pr. per truck.
Radius Arm Bushing
p/n: 20-0671-36
This Radius Arm Bushing is a quality reproduction of the original factory part. The bushing fits at the frame end of the radius rod on 4-Wheel Drive models. Requires two (2) bushings per side with four (4) total per vehicle.
Torsion bar bushing
p/n: 20-0670-36
Bushing, front radius rod. Front and rear. Four (4) required per Truck.
Tailgate Bumper
p/n: 20-0694-45
These Tailgate Bumpers are sold as pair. The bumpers fit in brackets and comes with chains.
Door Hinge Seal Set
p/n: 20-0909-73
This four (4) piece Door Hinge Seal set is designed from the original part for superior fitment and seal. This Door hinge to door seal set is for both doors.
Windshield Molding Joint Cover With Wide Moldings
p/n: 70-4483-52
This Windshield Molding Joint Cover is designed from the original part for superior fitment and usage. This cover is made from Stainless Steel to cover the molding joint where the Windshield rubber comes together.
Pickup tie down mounting pad
p/n: 20-0885-45
Pad, pickup box tie down hook. Eight (8) required per truck.
