Search Results

63 items found matching 1971 Ford F-250 4 door Crew Cab Pickup
The listing below contains just short, abbreviated descriptions.
Please click on the part name in red in order to get a complete description.
Side window run channel kit

p/n: 20-0900-58

Kit, complete window anti-rattler. Deluxe kit for both doors. Kit includes: two (2) each of C7TZ-8121508, two (2) pair of D1TZ-8121452-53, and two (2) each of C7TZ-8121546-A. Useage: 1971-1972: F150-350 series truck (After Serial #40,001 for

$271.00/set
Allow 1-3 Weeks Ships Separately
Front Door Vent Window Weatherstrips

p/n: 20-0893-55

These front door vent window seals are designed from the original parts for superior fitment and seal. The pieces are molded as left and right and are one piece with the division post seal.

$153.20/pr.
In Stock
Windshield Gasket

p/n: 20-0890-50

This windshield gasket mounts around the full perimeter of the front glass and has properly molded corners for a precise, factory fit. It also has the slot to accommodate the outer edge's decorative molding.

$143.10/ea.
In Stock
Windshield Gasket

p/n: 20-2894-50

This windshield gasket mounts around the full perimeter of the front glass and has properly molded corners for a precise, factory fit.

$143.10/ea.
In Stock
Body mounting pad kit

p/n: 20-0889-48

Kit, cab to frame mounting. For 2 W/D (wheel drive) only. Thirty-six (36) piece set. Comes with instruction sheet. Set includes special washers, all bolts and nuts.

$136.20/set
Ships in 3-4 Days
Window felt and run channel

p/n: 20-0899-58

Eight (8) piece set. Set includes run channel and beltline weatherstrip with stainless steel bead.

$135.30/set
In Stock
Side window run channel kit

p/n: 20-0898-58

Kit, complete window anti-rattler. Deluxe kit for both doors. Replaces factory #C7TZ-8121460-CA. Kit includes: two (2) each of C7TZ-8121508, two (2) pair of C7TZ-8121452-53, and two (2) each of C7TZ-8121546-A. Useage: 1967-71: F100-750 serie

$126.30/set
In Stock
Radiator mounting pad kit

p/n: 20-0772-31

Pad kit, radiator support to frame. Fits 1973-76 F100 2-wheel drive, but will work for F250 through F350 but must add extra metal washers.

$123.10/set
Ships in 3-4 Days
Rear Window Gasket

p/n: 20-0912-81

This rear window gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the back glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation. It also has the slot to accommodate the outer edge's decorative molding.

$104.50/ea.
In Stock
Rear Window Gasket

p/n: 20-0911-81

This rear window gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the back glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation.

$104.50/ea.
In Stock
Torsion bar bushing kit

p/n: 20-0776-32

Bushing kit, radius arm and axle pivot. 2 W/D (wheel drive). Includes two (2) eachC5TZ-3B177-A, two (2) each C5TZ-3B203-C, and two (2) each C5TZ-3B203-B.

$104.50/set
Ships in 3-4 Days
Front Door weatherstrip

p/n: 20-0908-72

Door edge weatherstrip. This part is the primary door to body weatherstrip. Glues to the body of the truck. Adhesive is not included in the kit.

$92.50/pr.
In Stock
Window felt weatherstrip

p/n: 80-0644-57

Original equipment style side window horizontal seal kit (also known as beltline weatherstrip). Made with black bead. Kit includes inner and outer felt beltline weatherstrip for each door and quarter windows. These strips wipe the side windows when the gl

$76.40/set
Ships in 1-3 Weeks
Window felt weatherstrip

p/n: 80-0643-57

Original equipment style side window horizontal seal kit (also known as beltline weatherstrip). Made with stainless steel bead. Kit includes inner and outer felt beltline weatherstrip for each door and quarter windows. These strips wipe the side windows w

$76.40/set
Ships in 1-3 Weeks
Flexible run channel

p/n: 20-0894-58

Channel, door glass flexible run.

$62.00/ea.
In Stock
Splash apron

p/n: 20-0880-44

Seals, front fender to front of cab. Fasteners included.

$58.30/pr.
Ships in 3-4 Days
1971 Ford Truck & Van Factory Shop Manual, CD

p/n: 07-1250-07

This FORD-Licensed Detroit Iron CD contains the most comprehensive set of digital OEM shop manuals. The factory manuals on this CD were professionally scanned from the original service and parts manuals.

$55.99/ea.
Ships in 3-4 Days
Clutch control boot

p/n: 20-0761-24

Boot, clutch release lever to clutch housing.

$46.90/ea.
Ships in 3-4 Days
Axle rebound pad

p/n: 20-0647-32

Bumper, rear axle. Two (2) required per Truck. 1965-72: F100, F350 2 W/D (wheel drive), F100, F250 4 W/D (wheel drive).

$44.10/ea.
Ships in 3-4 Days
Steel sash channel

p/n: 20-0895-58

Channel, door glass sash. Either Right or Left side.

$44.10/ea.
Ships in 3-4 Days
Steering column floorplate

p/n: 20-0785-36

Seal, steering column to floor. Manual steering.

$44.10/ea.
Ships in 3-4 Days
Brake and clutch shank seal

p/n: 20-0758-23

Seal, clutch rod to floor. Useage: 1971-72: F100-350 series AFTER Serial #M00,001 1973-79: F100-350 series trucks

$42.60/ea.
Ships in 3-4 Days
Cargo light mounting pad

p/n: 20-0841-17

Pad, cargo light. Gray rubber.

$41.10/ea.
Ships in 3-4 Days
Spring shackle bushing kit

p/n: 20-0867-32

Kit, front of rear spring shackle. Enough for one spring.

$36.70/set
Ships in 3-4 Days
Bumper guard

p/n: 20-0639-28

Pad, front bumper guard.

$36.10/ea.
In Stock
Axle rebound pad

p/n: 20-0773-32

Bumper, front axle.

$33.50/ea.
Ships in 3-4 Days
Hood to cowl weatherstrip

p/n: 20-0874-42

Lacing, hood cowl. Mounting clips installed.

$33.50/ea.
Ships in 3-4 Days
Motor Mount

p/n: 20-0602-11

Rear motor mount. Useage: 1965-72: Fits F100, F250 4x2s Manual Trans. 8 cyl. 302, 352, 360, 390; F100, F250 4x2s Manual Trans. 8 cyl. 240, 300; F100, F250 all 6 cyl.

$33.50/ea.
Ships in 3-4 Days
Rigid run channel

p/n: 20-0897-58

Channel, rigid division bar run.

$31.80/ea.
Ships in 3-4 Days
Brake and clutch shank seal

p/n: 20-0850-23

Seal, clutch rod to floor. Rubber with metal. Useage: 1968-71: F100-350 Series before Serial #M00,001.

$31.40/ea.
Ships in 3-4 Days
Accelerator Pedal Pad

p/n: 20-1075-40

Pedal, accelerator. Includes chrome trim. Trucks (F100-350) before Serial # P60,001.

$28.10/ea.
Ships in 3-4 Days
Motor Mount

p/n: 20-0834-11

Right hand motor mount. Useage: 1967-72: F100-350 Trucks with 352, 360, or 390 V8.

$25.90/ea.
Ships in 3-4 Days
Splash Apron Fender Seal

p/n: 20-0877-44

Seals, front fender apron to cab mount strip. Made of high quality EPDM rubber and to the original design for a factory like fit.

$25.60/pr.
Ships in 3-4 Days
Tailgate chain cover

p/n: 20-0481-45

Cover, tailgate chain rubber. Cover only. Chain NOT included.

$25.30/pr.
Ships in 3-4 Days
Fender welting

p/n: 20-1591-44

Fender welting. Eight (8) foot length.

$23.80/ea.
In Stock
Splash apron

p/n: 20-0879-44

Seals, front fender apron to hood hinge support. Fasteners included.

$21.80/pr.
Ships in 3-4 Days
Gearshift boot

p/n: 20-2459-26

Insulator, transmission gear shift column lever.

$17.90/ea.
In Stock
Standard bumper

p/n: 20-0907-71

Bumpers, dual useage. Used on the rear of the hood for 1966-67: Fairlane & Ranchero. Used as a liftgate bumper for 1966-77: U-Series Bronco. Use on the door for 1967-72: F100-750 Series trucks.

$17.90/pr.
In Stock
Door handle mounting pad

p/n: 20-0905-69

Pads, outside door handle.

$17.10/set
Ships in 3-4 Days
Parking brake pedal pad

p/n: 20-0755-22

Pad, parking brake pedal.

$17.10/ea.
Ships in 3-4 Days
Hood bumper

p/n: 20-0875-42

Bumpers, hood side. 1967-69 needs 1 pr. per truck, 1970-72 needs 2 pr. per truck.

$16.10/pr.
Ships in 3-4 Days
Radius Arm Bushing

p/n: 20-0671-36

Radius Arm Bushing - At Frame end of Radius Rod 4-Wheel Drive. Requires two (2) bushings per side with four (4) per vehicle.

$14.10/ea.
Ships in 3-4 Days
Parking brake pedal pad

p/n: 20-0016-22

Pad, parking brake pedal. Slip over type.

$12.80/ea.
In Stock
Splash apron

p/n: 20-0878-44

Seals, front fender apron to firewall lower. Staples included.

$12.80/pr.
Ships in 3-4 Days
Brake and clutch pedal pad

p/n: 20-0848-22

Pad, brake and clutch pedal. Slip over type.

$11.30/ea.
In Stock
Tailgate bumper

p/n: 20-0694-45

Bumpers, tailgate chain. Fits in bracket.

$10.50/pr.
Ships in 3-4 Days
Door weatherstrip

p/n: 20-0909-73

Seal, door hinge to door. Four (4) piece set.

$10.00/set
In Stock
Backup lens gasket

p/n: 20-1251-17

Gaskets, back-up light lens to housing. Before Serial # Y60,001

$9.90/pr.
Ships in 3-4 Days
Tailgate bumper

p/n: 20-0801-45

Bumper, tailgate support retaining. Two (2) required per truck.

$9.90/ea.
In Stock
Parking light lens gasket

p/n: 20-0840-16

Gaskets, parking light lens.

$9.20/pr.
Ships in 3-4 Days
Cowl vent gasket

p/n: 20-0892-54

Gasket, cowl side air vent.

$9.10/pr.
Ships in 3-4 Days
Pickup tie down mounting pad

p/n: 20-0885-45

Pad, pickup box tie down hook. Eight (8) required per truck.

$7.60/ea.
Ships in 3-4 Days
Tailgate bumper

p/n: 20-0580-45

Bumpers, side of tailgate to bed. Installs in tailgate.

$6.60/pr.
Ships in 3-4 Days
Wiper transmission gasket

p/n: 20-0891-53

Gasket, wiper pivot.

$6.60/pr.
Ships in 3-4 Days
Standard bumper

p/n: 20-0916-88

Bumpers, ashtray door.

$5.90/pr.
Ships in 3-4 Days
Tailgate bumper

p/n: 20-0799-45

Bumpers, tailgate. Mounts on pillar.

$5.60/pr.
Ships in 3-4 Days
Firewall grommet

p/n: 20-0853-24

Seal, parking brake cable to floor.

$4.40/ea.
Ships in 3-4 Days
Body hole plug

p/n: 20-0845-20

Plug, oval floor pan front. Rubber. One half (1/2) inch by one (1) inch diameter. Two (2) each required per truck.

$3.70/ea.
In Stock
Body hole plug

p/n: 20-0844-20

Plug, cowl side panel inner. One and seven eighths (1-7/8) inch diameter. Two (2) each required per truck.

$3.70/ea.
In Stock
Heater gasket

p/n: 20-0860-31

Seal, heater tube to firewall.

$3.20/ea.
Ships in 3-4 Days
Sun visor end plug

p/n: 20-2882-88

Tips, sun visor rubber.

$2.80/pr.
In Stock
Brake adjustment hole plug

p/n: 70-1092-24

Plug, brake adjustment hole. Fits five sixteenths (5/16) inch by one (1) inch slot. Most models with drum brakes.Length: 1.25 inches. Height: .875 inches.

$2.60/ea.
In Stock
Glovebox bumpers

p/n: 20-0830-88

Bumpers, glovebox door.

$1.40/pr.
In Stock