Please click on the part name in red in order to get a complete description.
Kit, complete window anti-rattler. Deluxe kit for both doors. Kit includes one (1) pair D7TZ-1021452-PR.; one (1) pair D7TZ-1021453-PR.
These front door vent window seals are designed from the original parts for superior fitment and seal. The pieces are molded as left and right and are one piece with the division post seal.
This windshield gasket mounts around the full perimeter of the front glass and has properly molded corners for a precise, factory fit. It also has the slot to accommodate the outer edge's decorative molding.
This windshield gasket mounts around the full perimeter of the front glass and has properly molded corners for a precise, factory fit.
Radius Arm Bushing and Axle Kit - For 4-Wheel Drive. Includes four (4) each D6TZ-3B203-A Front Axle bushings and four (4) each C6TZ-3B203-C Frame end bushings.
This rear window gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the back glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation.
This rear window gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the back glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation. It also has the slot to accommodate the outer edge's decorative molding.
Kit, cab to frame mounting. Thirty-six (36) piece set. For 2 W/D (wheel drive) only.
Pad kit, radiator support to frame. Fits 1973-76 F100 2-wheel drive, but will work for F250 through F350 but must add extra metal washers.
Bushing kit, radius arm and axle pivot. 2 W/D (wheel drive). Includes two (2) each C5TZ-3B177-A, two (2) each D5TZ-3B203-C, and two (2) each D5TZ-3B203-D.
Original equipment style side window horizontal seal kit (also known as beltline weatherstrip). Kit includes inner and outer felt beltline weatherstrip for each door and quarter windows. These strips wipe the side windows when the glass is lowered. They c
Seal, stationary quarter window. Models WITH Stainless molding.
Seal, stationary quarter window. Models WITHOUT Chrome.
Seal, stationary quarter window. Models WITH Flexible Plastic Chrome molding. See #20-0828-83 for plastic chrome reveal molding.
Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide, three sixteenths (3/16) inch, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty fi
Channel, door glass sash. Left Side only.
Channel, door glass sash. Right Side only.
This door gasket weatherstrip is the primary door to body weatherstrip. These gaskets mount directly to the body pinchweld seam to seal against the full perimeter of both the front left and front right doors.
Channel, rigid division bar run. For front edge of door glass. Two (2) required per truck. Use for either right or left side.
Boot, clutch release lever to clutch housing.
Bumper, rear axle. Two (2) required per Truck. 1965-72: F100, F350 2 W/D (wheel drive), F100, F250 4 W/D (wheel drive).
Channel, door glass flexible run. Either Right or Left Side. Top & back side of door glass. Two (2) required per truck.
Seal, steering column to floor. Manual steering.
Seal, clutch rod to floor. Useage: 1971-72: F100-350 series AFTER Serial #M00,001 1973-79: F100-350 series trucks
Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide, three sixteenths (3/16) inch, twenty five (25) foot roll. Typially used for attaching two (2) fenders to body. For f
Pad, cargo light. Before Serial #Y60,001.
Knob, column shift lever. Black.
Lacing, hood cowl. With pre-drilled mounting holes and mounting clips installed. Made of high quality EPDM rubber and to the original design for a factory like fit and appearance.
Pad, front bumper guard.
Grommet, gas tank filler neck. Models with in cab tank.
Bumper, front axle.
Assembly, front stabilizer bar link. Two (2) required per truck.
Bushing, front stabilizer bar. Two (2) required per car. For 2 W/D (wheel drive).
Kit, front of rear spring shackle. 2 W/D (wheel drive).
Kit, front or rear stabilizer bar link end repair. Two (2) per kit. Used on Front for 1975-79: F150-350 series 4x2. Used on Rear for 1980-89: F100-350 series.
Seals, front fender apron to cab mount strip. Made of high quality EPDM rubber and to the original design for a factory like fit.
Cover, tailgate chain rubber. Cover only. Chain NOT included.
Fender welting. Eight (8) foot length.
Pads, outside door handle.
Gasket, windshield wiper. Four (4) piece set.
Insulator, transmission gear shift column lever.
Bumpers, hood side. Four (4) piece set.
Pad, parking brake pedal.
Gaskets, side marker light. Front and rear. Four (4) piece set.
Seal, parking brake cable to floor.
Radius Arm Bushing - At Frame end of Radius Rod 4-Wheel Drive. Requires two (2) bushings per side with four (4) per vehicle.
Pad, brake and clutch pedal. Slip over type.
Pad, brake pedal.1973-79: F100-350 series with manual or automatic transmission. 1980-89: F100/350 series with automatic transmission.
Plug, fill hole. Used where clutch rod goes on standard transmission.
Bumpers, tailgate chain. Fits in bracket.
Gaskets, back-up light lens to housing. Before Serial # Y60,001
Bumper, tailgate support retaining. Two (2) required per truck.
Bumpers, tailgate lower side. Mounts on tailgate.
Grommets, firewall. Five eighths (5/8) inch outside diameter. One (1) each on both sides of firewall.
Pad, pickup box tie down hook. Eight (8) required per truck.
Bumpers, tailgate. Mounts on pillar.
Tips, sun visor rubber.
Plug, brake adjustment hole. Fits five sixteenths (5/16) inch by one (1) inch slot. Most models with drum brakes.Length: 1.25 inches. Height: .875 inches.
Bumpers, glovebox door.