Please click on the part name in red in order to get a complete description.
This rear window gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the back glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation. It also has the slot to accommodate the outer edge's decorative molding.
This rear window gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the back glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation.
This eight (8) piece side window glass kit includes the beltline moldings and glass run channels for both driver and passenger doors. These reproduction parts are designed from originals for superior performance, durability and a factory fit. Also referred to as a Door Glass Anti-Rattler Kit.
This windshield gasket mounts around the full perimeter of the front glass and has properly molded corners for a precise, factory fit. It also has the slot to accommodate the outer edge's decorative molding.
This windshield gasket mounts around the full perimeter of the front glass and has properly molded corners for a precise, factory fit.
Kit, cab to frame mounting. Thirty-six (36) piece set. For 2 W/D (wheel drive) only.
These front door vent window seals are designed from the original parts for superior fitment and seal. The pieces are molded as left and right and are one piece with the division post seal.
Original equipment style side window horizontal seal kit (also known as beltline weatherstrip). Kit includes inner and outer felt beltline weatherstrip for each door and quarter windows. These strips wipe the side windows when the glass is lowered. They c
Seal, stationary quarter window. Models WITH Stainless molding.
Seal, stationary quarter window. Models WITH Flexible Plastic Chrome molding. See #20-0828-83 for plastic chrome reveal molding.
Seal, stationary quarter window. Models WITHOUT Chrome.
Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide, three sixteenths (3/16) inch, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty fi
Channel, door glass sash. Left Side only.
Channel, door glass sash. Right Side only.
This door gasket weatherstrip is the primary door to body weatherstrip. These gaskets mount directly to the body pinchweld seam to seal against the full perimeter of both the front left and front right doors.
This Radius Arm and Axle Pivot Bushing Kit is a quality reproduction of the original factory part(s). 2 W/D (two-wheel drive). This six (6) piece kit includes two (2) each C5TZ-3B177-A, two (2) each D5TZ-3B203-C, and two (2) each D5TZ-3B203-D top quality bushings.
This FORD-Licensed Detroit Iron CD contains the most comprehensive set of digital OEM shop manuals. The factory manuals on this CD were professionally scanned from the original service and parts manuals.
Channel, rigid division bar run. For front edge of door glass. Two (2) required per truck. Use for either right or left side.
Boot, clutch release lever to clutch housing.
Bumper, rear axle. Two (2) required per Truck. 1965-72: F100, F350 2 W/D (wheel drive), F100, F250 4 W/D (wheel drive).
Channel, door glass flexible run. Either Right or Left Side. Top & back side of door glass. Two (2) required per truck.
Seal, steering column to floor. Manual steering.
Seal, clutch rod to floor. Useage: 1971-72: F100-350 series AFTER Serial #M00,001 1973-79: F100-350 series trucks
Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide, three sixteenths (3/16) inch, twenty five (25) foot roll. Typially used for attaching two (2) fenders to body. For f
Pad, cargo light. Before Serial #Y60,001.
Knob, column shift lever. Black.
Pad, front bumper guard.
Grommet, gas tank filler neck. Models with in cab tank.
Bumper, front axle.
Assembly, front stabilizer bar link. Two (2) required per truck.
Bushing, front stabilizer bar. Two (2) required per car. For 2 W/D (wheel drive).
Kit, front or rear stabilizer bar link end repair. Two (2) per kit. Used on Front for 1975-79: F150-350 series 4x2. Used on Rear for 1980-89: F100-350 series.
Seals, front fender apron to cab mount strip. Made of high quality EPDM rubber and to the original design for a factory like fit.
Cover, tailgate chain rubber. Cover only. Chain NOT included.
Fender welting. Eight (8) foot length.
Pads, outside door handle.
Gasket, windshield wiper. Four (4) piece set.
Insulator, transmission gear shift column lever.
Bumpers, hood side. Four (4) piece set.
Pad, parking brake pedal.
Gaskets, side marker light. Front and rear. Four (4) piece set.
Radius Arm Bushing - At Frame end of Radius Rod 4-Wheel Drive. Requires two (2) bushings per side with four (4) per vehicle.
Pad, brake and clutch pedal. Slip over type.
Pad, brake pedal.1973-79: F100-350 series with manual or automatic transmission. 1980-89: F100/350 series with automatic transmission.
Plug, fill hole. Used where clutch rod goes on standard transmission.
Bumpers, tailgate chain. Fits in bracket.
Gaskets, back-up light lens to housing. Before Serial # Y60,001
Bumper, tailgate support retaining. Two (2) required per truck.
Bumpers, tailgate lower side. Mounts on tailgate.
Grommets, firewall. Five eighths (5/8) inch outside diameter. One (1) each on both sides of firewall.
Pad, pickup box tie down hook. Eight (8) required per truck.
Bumpers, tailgate. Mounts on pillar.
Tips, sun visor rubber.
Bumpers, glovebox door.