Running Board Matting
Filler, running board-to-body, forty (40) inch long strip. For sixty four (64) inch strips see our #70-1117-45.
This Body Anti-Squeak Rubber is a bulb type seal. Made of high-quality EPDM dense rubber and designed from original parts for superior fitment and seal. Twelve (12) foot strip.
Grommet, door sill mat retainer at lower door opening. All sill plates with metal stud retainer. (Included in our #40-0542-49 set).
Mats, door opening step, with metal backing as original. Two (2) piece set.2 piece set for 2 door Fleetline Aerosedan, Style 1007 ONLY.
Matting, cover panel extension, fender to door, front, right and left, with brass core, as original.
Mats, front door opening, with metal backing, proper body contour and attaching holes. Two (2) piece set for both front doors.Length: 30.375 inches.
Mats, door sill opening, on body. Clip type. For stud-type see our #40-0542-49) mat includes retaining grommets (40-0125-49).
Matting, cover panel extension, fender to door, rear, right and left, with brass core as original.
Mats, door sill opening, on body. Stud type, includes retaining grommets (#40-0125-49). For clip type see our #40-0541-49.
Mats, door sill opening, on body. Made without metal core (copied from authentic rubber only original). Molded-in carrot retainers.
Mats, door opening step, rubber with metal backings as original.Length: 41.0 inches.
Mat, door opening, on body. Rear doors. For front doors see our #70-2622-49. Excellent craftsmanship with authentic metal core with studs like original.
Mat, door opening, on body. Front doors. For rear doors see our #70-2623-49. Excellent craftsmanship with authentic metal core with studs like original.
Mats, rear door opening, with metal backing, proper body contour and attaching holes. Two (2) piece set for both rear doors.Length: 21.875 inches.
Mat pair for door sill threshold opening, on body. Made with authentic appearance and constructed of long lasting rubber like original. Perfect replica of factory #1433321, however it should work fine as a replacement of #1497247, 1433281, and 1803065.
Seal, wheel streamliner (fenderskirt) to fender. Two (2) strips each cut five (5) foot long.Length: 60.0 inches. Width: .625 inches.
Inner Fender Seal for anti-rattle, running board apron to body, or fender splash panels. Nine sixteenths (9/16) inch by seven eighths (7/8) inch slotted sponge rubber to accept rivets. Sold in eight (8) foot strips.
LaSalle monograms for center of running board matting, exact copy, to be in-laid.
This Rumble Seat Step rubber pad is designed from the original part for superior fitment and seal. This step pad fits on the vehicle rear fender to provide a step into the rumble seat.
Mounting pad for our #25-0018-44 fender step.Length: 7.375 inches.
Pad, rumbleseat step slip over style for original core, "DB" logo.
Step, rumbleseat fender with molded-in studs.Length: 6.375 inches.
Pads, rumbleseat step.
Step pad, rumbleseat, on rear fender, with bowtie emblem. Steel core with bolt.Width: 4.375 inches. Height: 5.25 inches.
Pad, rumbleseat step, on rear bumper bracket or fender. Rubber cover only, full slip-over type with bowtie emblem.
Pad, rumbleseat step, with "DS" logo. Fits old bracket and bezel. See our #40-0055-44 also.Height: .50 inches.
Pad, rear bumper step, rubber only. Fits old metal core.Height: .8125 inches.
Step pad, rumbleseat upper, with "P" logo. Fully molded with core and mounting stud.Height: .625 inches.
Pad, rumbleseat step, with "DeSoto" logo, full slipover type to fit old carcass and outer trim ring. See also our #40-0353-44.Height: .50 inches.
Pad, rumbleseat step bears Chrysler medallion logo in center.Height: .50 inches.
Pad, rumbleseat step, with "P" logo, fully detailed slipover pad for old core. Fits original trim ring.Height: .50 inches.
Cover, rumbleseat step pad, slipover type, excellent copy.Width: 5.0 inches. Height: 5.0 inches.
Step pad, rumbleseat, upper, with Chrysler medallion logo. Fully molded with core and mounting stud.Height: .625 inches.
Pad, rumbleseat step, with "Dodge" logo, slip over type to fit old steel core. Perfect detail and lettering.Height: .50 inches.
Running board center strip. Fits original metal retainer. Authentic reproduction with correct detail.
This Running Board Cover matting is designed from the original part for superior fitment and seal. This cover pair is pre-molded and manufactured from top quality rubber.
This Running Board Door Opening Step Pad pair is designed from the original part for superior fitment and seal. Provides a perfect copy of the original accessory.
Seal strip, running board to body lower edge, exact copy. Top quality, each strip six (6) foot long. Length: 72.0 inches. Height: .5625 inches.
Seal, running board to rear quarter panel special.
Liner, running board to body, (side apron to body seal). Set consists of two (2) pieces seven (7) foot long. One (1) inch width is after fold over.
Running board matting for Model 115C only. Made from the molded running board matting for the 120's (our #30-0214-49).
Covers, running board. Pre-molded.
Running board Matting. Fully molded with all original details. Includes integral flaps of rubber on 3 sides to cushion fenders and splash apron. No splicing or butting required.
Matting, running board. Special original design molded in solid aluminum molds, right and left. Size includes stock for apron riser and outer radius.
Matting, running board, original pattern with material to come down over ends and sides.
Running board Matting. Fully molded with all original details. No splicing required. Metal backing or metal trim not included.
Running board matting. Fully molded with crowned blocks. Top quality rubber, flawless detail. No splicing or butting required.
Running board matting. Fully molded, fine detail. Incorporates embossed underside to fit metal bead around edge of original running board steel.
Running board Matting. Fully molded with all original details. Includes integral flaps of rubber on 3 sides to cushion fenders and splash apron.
This Running Board Matting is designed from the original part for superior fitment and a factory like appearance. Fully molded with all original details including underside clearance for embossed running board for a perfect fit.