Corner Joint Sleeves
p/n: 70-3720-52
Corner Joint Sleeve pair for the bottom corners of rear window gaskets that require a locking strip. These joint sleeves have a Chrome look to match the Mylar locking strip. Joint sleeves can also be painted black when using with the black rubber locking strip.
Coupe Hinge Pillar Weatherstrips
p/n: 70-3934-63
This Coupe Hinge Pillar Weatherstrip attaches to the body and seals between the A-pillar post and the front section of the door or vent window frame when the door is closed.
Cowl Drain Gutter
p/n: 70-0780-73
Gutter, windshield lower corner, left and right. Rubber with metal core as original. Seven and three quarters long (7-3/4").Length: 7.75 inches.
Cowl Drain Gutter Hose Grommet
p/n: 33-0329-54
This Cowl Drain Gutter Hose Grommet is fully molded and designed from the original part for superior fitment and seal. This grommet is made from high-quality EPDM dense rubber to provide excellent durability.
Cowl Grill Seal
p/n: 70-1520-54
Seal, cowl grill to firewall. Die cut dense sponge rubber. Replaces #3860119.
Cowl grill seal
p/n: 60-0679-54
Weatherstrip, cowl grill to firewall. Used on either end of cowl near fender. Die cut dense sponge rubber.
Cowl Panel to Cowl Filler Seals
p/n: 70-3695-43
This Cowl Panel to Cowl Filler Gasket pair is designed from the original part for superior fitment and function. These seals go under the cowl vent grille on the left and right sides of it.
Cowl Side Drain Gutters
p/n: 70-0867-73
This left and right Cowl Side Drain Gutter pair is designed from the original part for superior fitment and function. EPDM rubber with metal core as original.
Cowl to Fender Filler Weatherstrips
p/n: 70-3940-43
This Cowl To Fender Filler Weatherstrip pair is made from top quality rubber and designed from originals for a superior fitment and seal.
Cowl to Fender Seals
p/n: 70-3340-43
This two (2) piece Cowl to Fender Seal pair is designed from the original part for superior fitment and seal. Fender seals are die cut from quality masticated rubber to authentic original dimensions.
Cowl To Glass Molding
p/n: 70-5025-52
This Cowl To Glass Molding is designed from the original part for superior fitment. This molding mounts to the cowl and creates a seal against the width of the glass. A reproduction manufactured to OEM specifications.
Cowl Vent Drain Hose
p/n: 60-0381-54
This Cowl Vent Drain Hose is designed from the original part for superior fitment and seal. Length: 7-1/4" inches.
Cowl Vent Gasket
p/n: 60-0081-54
Gasket, cowl vent. These parts are made of the highest quality and authenticity.Length: 15.0 inches.
Cowl Vent Gasket
p/n: 60-0601-54
Side cowl vent seal. One eighth (1/8) inch thick high quality sponge design.Length: 8.50 inches. Width: 5.375 inches.
Cowl Vent Gasket
p/n: 60-0131-54
Gasket, cowl vent. One fourth (1/4) inch by five sixteenths (5/16) inch, for five (5) inch by fifteen (15) inch top cowl vent. Sponge type.Width: 15.
Cowl Vent Gasket
p/n: 60-0124-54
Gasket, cowl vent. Original labyrinth style, not sponge.Length: 16.5 inches. Width: 4.0 inches.
Cowl Vent Gasket
p/n: 60-0087-54
Gasket, cowl vent, lip type. Sponge rubber, for three and seven eighths (3-7/8) inch by fifteen (15) inch cowl vent.Length: 15.0 inches. Width: 3.
Cowl Vent Gasket
p/n: 60-0044-54
Gasket, cowl vent. One (1) piece sponge rubber shear die cut to correct dimensions. Replaces #4034247-8.
Cowl Vent Gasket
p/n: 60-0270-54
This Cowl Vent Gasket is designed from the original part for superior fitment and seal. This gasket works to seal the cowl vent when closed into the cowl body. A labyrinth type as original reproduction manufactured to OEM specifications.
Cowl Vent Hose
p/n: 60-0457-54
Hose, cowl vent drain. Seems to be correct for some models rather than our #50-0259-54.
Cowl Vent Weatherstrip
p/n: 70-0224-54
Weatherstrip, cowl vent. Original solid rubber configuration, not a sponge substitute. A top quality part for your classic vehicle restoration.
Cowl vent weatherstrip
p/n: 70-0143-54
Gasket, cowl vent. Perfect copy of original, not a sponge substitute, top quality material.
Dash to Door Windlace Weatherstrips
p/n: 70-3951-72
This Dash To Door Windlace Weatherstrip is a pair of manufactured weatherstrip seals, one for each door, that are designed from originals and made for a like factory fit.
Dash to Door Windlace Weatherstrips
p/n: 70-3952-72
This Dash to Door Windlace Weatherstrip is a pair of manufactured weatherstrip seals, one for each door that are designed from originals and made for a like factory fit.
Decklid Top Cover Weatherstrip
p/n: 70-3922-67
This Decklid Top Cover Weatherstrip is designed from the original part for a superior fitment and seal. This weatherstrips mounts around the full perimeter of the soft top storage compartment.
Detachable Center Post Pad
p/n: 70-0279-67
Pads, for bottom of folding post or body, brass core as original, screw held.Length: 1.875 inches. Width: 1.0625 inches.
Dimmer Switch Grommet
p/n: 40-0083-88
This Dimmer Switch Grommet is used during carpet installations in automotive restorations. Made from high-quality EPDM dense rubber to provide excellent durability. Includes a wide flange for floor dimmer switch fitments.
Division Bar Channel and Beltline Set
p/n: 80-0016-57
This is an Original equipment style side window horizontal weatherstrip set (also known as beltline weatherstrip). This ten (10) piece set includes vent window division bars inner / outer window felt beltline weatherstrips for each side window and quarter window and a felt piece for above the rear quarters.
Division Bar Channels and Window Felt Beltlines Set
p/n: 80-0014-57
This is an Original equipment style side window horizontal weatherstrip set (also known as beltline weatherstrip). This ten (10) piece set includes vent window division bars inner / outer window felt beltline weatherstrips for each side window and quarter window and a felt piece for above the rear quarters.
Division Bar Grommet
p/n: 70-0483-62
These Division Bar Grommets are fully molded for the rear door vent divider post (wind deflector). Four (4) piece set.
Door - Gravel Shield - Running Board Weatherstrip
p/n: 60-0054-73
This Door - Gravel Shield - Running Board Weatherstrip is a anti-squeak bulb type extrusion with fitment for General Motors vehicles. A twelve (12) foot strip made of high-quality EPDM dense rubber and designed from original parts for superior fitment, finish and function.
Door Alignment Pad
p/n: 70-1821-71
Wedge pads, door aligning.Length: 1.125 inches. Width: .5 inches. Height: .875 inches.
Door Alignment Pad
p/n: 60-0060-71
Wedge pad, door aligning dovetail. Goes under bumper retainer.Length: .9375 inches. Width: .9375 inches. Height: .4375 inches.
Door Auxiliary Weatherstrips
p/n: 60-0342-73
This six (6) piece Door Auxiliary Weatherstrip set is designed from the original part for superior fitment and seal. The Auxiliary Weatherstrip, also known as a "J" seal, installs on the door front at the beltline, right and left sides of the vehicle.
Door Auxiliary Weatherstrips
p/n: 70-3932-73
This Door Auxiliary ("J-Strip") Weatherstrip pair is designed from the original parts for superior fitment and seal. These two (2) glue-on strips, one for each door, are manufactured for a factory like fit.
Door Auxiliary Weatherstrips
p/n: 70-3931-73
This front Door Auxiliary ("J-Strip") Weatherstrip pair is designed from the original parts for superior fitment and seal. These two (2) glue-on strips, one for each door, are manufactured for a factory like fit.
Door Auxiliary Weatherstrips
p/n: 70-3917-73
This two (2) piece Door Auxiliary Weatherstrip "J-Strip" pair is designed from originals and made for a like factory fit. This pair replaces the driver and passenger side door seals.
Door Body Above Door Weatherstrips
p/n: 70-3933-61
This pair of Door Body Above Door Weatherstrips, provides one seal for each door. Designed from originals and made for a like factory fit.
Door Bottom Drain Hole Seal
p/n: 70-0938-70
This Door Bottom Drain Hole Seal is designed from the original part for superior fitment and seal. This part fits into the lower door on both two (2) and four (4) door models.
Door Bumper
p/n: 33-0505-71
This upper / lower Door Bumper is a quality reproduction of the original factory part. Self-retaining bumper is manufactured to OEM specifications to install for an authentic fit, finish, and function. Length: 7/8 inches. Width: 13/16 inches. Height: 1-1/8.
Door Bumper
p/n: 70-1158-71
Pad, door jamb, (door side bumper).Length: 1.25 inches. Width: 1.125 inches.
Door Bumper
p/n: 50-0203-41
This Door Bumper is used for the fuel filler door on the rear fender. Molded from top-quality EPDM rubber over a steel core for durability. These bumpers are screw retained.
Door Bumper
p/n: 33-1234-71
This Door Bumper is fully molded and designed from the original part for superior fitment. This door bumper attaches to the vehicle door to support/cushion the door closure. Two (2) or four (4) used per car.
Door Bumper
p/n: 33-1227-71
This Door Bumper is fully molded and designed from the original part for superior fitment. The twin retainer style rubber bumper attaches to the vehicle body to support/cushion the door closure. Usually requires two (2) bumpers each per vehicle.
Door Bumper
p/n: 33-0981-71
This Door Bumper is designed from the original part for superior fitment, finish and function. Molded with push in carrot retainers, this bumper is commonly used as a upper door bumper on GM models.
Door Bumper
p/n: 70-0168-71
Bumper, door side. Square type held by four (4) screws, metal core as original.
Door Bumper
p/n: 70-1156-71
Door Side Bumper made from EPDM Dense rubber. Clip retained. Appears identical to Atwood #107, #208. Width: 1-1/2" inches. Height: 1-5/16"