Front and Rear Door Weatherstrips
p/n: 20-3116-72
This Front and Rear Door Weatherstrip set is designed from the original parts for superior fitment and seal. These primary door weatherstrips mount (glue-on) directly to the four (4) doors acting to seal the full perimeter of the doors against the vehicle body when the door is closed.
Front & Rear Door Weatherstrip Set
p/n: 20-1949-72
Door edge weatherstrip. Includes front and rear door seals. This part is the primary door to body weatherstrip.
Rear Window Gasket Set
p/n: 20-1961-81
This Rear Window Gasket Set contains the seals that mount around all of the back glass pieces. The three (3) piece set has properly molded corners for a precise, factory fit and it also has the slot to accommodate the outer edge's decorative molding.
Front Door Vent Window Set
p/n: 90-0325-90
This four (4) piece Front Door Vent Window Set contains the main vent window seals and division post seals. All of the pieces were designed from original parts for a precise, factory fit.
Front Door Vent Window Set
p/n: 90-0313-90
This four (4) piece Front Door Vent Window Set contains the main vent window seals and division post seals. All of the pieces were designed from original parts for a precise, factory fit.
Front Door Weatherstrip
p/n: 20-0081-72
Door edge weatherstrip, front doors. This part is the primary door to body weatherstrip.
Front Door Vent Window Weatherstrips
p/n: 20-3039-55
These Front Door Vent Window Weatherstrips are the main seals needed to replace the rubber on your vent windows. They are designed and molded from original parts for superior fitment and seal.
Rear Door Weatherstrips
p/n: 20-0283-72
This Rear Door Weatherstrip pair is designed from the original part for superior fitment and seal. These primary door weatherstrips mount (pin-on) directly to the left and right rear doors sealing the full perimeter of the doors against the vehicle body when the door is closed.
Window Felt Beltline Weatherstrips
p/n: 80-0656-57
This is an Original equipment style side window horizontal weatherstrip set (also known as beltline weatherstrip). This eight (8) piece anti-rattler set includes inner and outer window felt beltline weatherstrips for each side window and quarter window. For models WITHOUT SPECIAL MOLDING.
Windshield Gasket with Groove
p/n: 20-0134-50
This Windshield Gasket mounts around the full perimeter of the front glass and has properly molded corners for a precise, factory fit.
Window Felt Beltline Weatherstrips
p/n: 80-0653-57
Original equipment style side window horizontal seal (also known as beltline weatherstrip). These strips wipe the side windows when the glass is lowered.
Front Door Vent Window Weatherstrips
p/n: 20-1743-55
These Front Door Vent Window Weatherstrips are the main seals needed to replace the rubber on your vent windows. They are designed and molded from original parts for superior fitment and seal.
Rear Door Weatherstrips
p/n: 20-0102-72
This Rear Door Weatherstrip pair is designed from the original part for superior fitment and seal. These primary door weatherstrips mount (glue-on) directly to the left and right rear doors sealing the full perimeter of the doors against the vehicle body when the door is closed.
Front Door Weatherstrips
p/n: 20-0284-72
This Front Door Weatherstrip pair is designed from the original part for superior fitment and seal. Push-pin type door weatherstrips mount directly to the body to seal against the full perimeter of the doors.
Front door weatherstrip
p/n: 20-0020-72
Door edge weatherstrip, front doors. This part is the primary door to body weatherstrip.
Rear Window Gasket
p/n: 20-3136-81
This Rear Window Gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the back glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation.
Rear Window Gasket
p/n: 20-3135-81
This Rear Window Gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the back glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation.
Division Bar Glass Run Channels
p/n: 20-0239-58
This two (2) piece Division Bar Glass Run Channel pair installs between the front of door glass and the back of the vent window.
Front Door Weatherstrips
p/n: 20-1948-72
This Front Door Weatherstrip pair is designed from the original parts for superior fitment and seal. These primary front door weatherstrips glue directly to the door to seal the driver and passenger doors when closed.
Rear Window Gasket
p/n: 20-1957-81
This Rear Window Gasket is designed from the original part for superior fitment and seal. The gasket mounts around the full perimeter of the back glass and has vulcanized, or bonded, ends. This gasket accepts stainless moldings.
Windshield Gasket
p/n: 20-3032-50
This Windshield Gasket is designed from the original part for superior fitment and seal. This gasket has a slot completely all around the seal to accommodate the outer edge's decorative molding.
Windshield Gasket
p/n: 20-1734-50
This Windshield Gasket mounts around the full perimeter of the front glass and has properly molded corners for a precise, factory fit. It also has the slot to accommodate the outer edge's decorative molding.
Upper Tailgate Weatherstrip
p/n: 20-3143-85
This Upper Tailgate Weatherstrip is designed from the original part for superior fitment and seal. The weatherstrip mounts on the top of the tailgate.
Windshield Gasket
p/n: 20-1876-50
This windshield gasket is designed from the original part for superior fitment and seal. It also has the slot to accommodate the outer edge's decorative molding.
Rear Bumper Stone Deflector Seal
p/n: 20-0232-47
This Rear Bumper Stone Deflector Seal is designed as an exact reproduction of the original bumper to body seal.
Lower Tailgate Weatherstrip
p/n: 20-3142-85
This Lower Tailgate Weatherstrip is designed from the original part for superior fitment and seal. The weatherstrip mounts on the bottom of the tailgate.
Upper Control Arm Shaft
p/n: 20-1278-32
This three (3) piece Upper Control Arm Shaft set is designed from the original part for superior fitment and performance. Renew the performance of your aged and worn front suspension to restore the ride of your classic vintage vehicle.
Front Door Inner Dog Leg Weatherstrips
p/n: 20-1767-70
This Front Door Inner Dog Leg Weatherstrip pair is designed from the original part for superior fitment and seal. This rubber weatherstrip installs on inner dog leg of the front door.
Rear Bumper Stone Deflector Seal
p/n: 20-1868-47
This Rear Bumper Stone Deflector Seal install between the body and rear bumper. This seal is an exact reproduction of the original bumper to body seal. The seal comes complete with installation fasteners.
Flexible Run Channel - 60 Inch
p/n: 20-1619-58
Channel, side window glass, vertical run. Flexible, felt lined, rubber covered channel. Available 60" lengths.
Splash Apron
p/n: 20-0230-44
This two (2) piece Splash Apron is designed from the original part for superior fitment and seal. Used to keep debris from entering the engine compartment.
Flexible Run Channel
p/n: 20-1146-58
This Flexible Run Channel helps to eliminate window rattle, provides a smooth sliding surface for glass movement, and works to protect the glass. Stainless steel beaded. Available in sixty (60) inch strips.
Front Engine Mount
p/n: 20-1786-11
This Front Engine Mount is made of a quality rubber over a metal core to provide maximum life and performance. Two (2) required per car.
Stabilizer Bar To Frame Bushing Set
p/n: 20-1844-33
This four (4) piece Stabilizer Bar To Frame Bushing Set mounts on the sway bar to frame. Bushings can crack, dry out, and harden resulting in squeaks.
Beltline Weatherstrips
p/n: 40-0539-57
This Beltline Weatherstrip pair installs on the left and right doors to wipe the inside and outside of the windows when the glass is lowered. Flexible, pile lined, rubber covered, with a black bead. Available in 3ft pair.
Hood Bumper Set
p/n: 20-0208-42
This eight (8) piece Hood Bumper set is designed from the original parts for superior fitment and function.
Hood Bumper Set
p/n: 20-0210-42
This eight (8) piece Hood Bumper set is designed from the original parts for superior fitment and function.
Front Lower Control Arm Bumper
p/n: 20-0202-32
This Front Lower Control Arm Bumper is designed from the original part for superior fitment, finish, and function. This suspension bumper mounts to the front lower control arm to prevent metal to metal contact.
Hood Bumper Set
p/n: 20-0212-42
This eight (8) piece Hood Bumper set is designed from the original parts for superior fitment and function.
Splash Apron
p/n: 20-0226-44
This Splash Apron pair is designed from the original part for superior fitment and seal. Used to keep road debris from entering the engine compartment.
Front Fender Apron Dust Shields
p/n: 20-0219-44
This Front Fender Apron Dust Shield pair is designed from the original part for superior fitment and function. Filler shield pieces are die cut from quality masticated rubber to authentic original dimensions.
Splash Apron
p/n: 20-0224-44
This Splash Apron pair is designed from the original part for superior fitment and seal. Used to seal the front fender apron to frame lower rear.
Window Felt Beltline Weatherstrips
p/n: 70-0555-58
These Window Felt Beltline Weatherstrips are sold as a three (3) foot pair. The beltline is used for side windows inner and/or outer, front and/or rear doors. Available in a 3ft pair.
Body Plug - Rubber Grommet Set
p/n: 20-2703-20
This thirty-three (33) piece Body Plug and Grommet set is designed from the original parts for superior fitment and sealing. Mustang Club of America (MCA) approved.
Firewall to Hood Weatherstrip - Cowl Lacing
p/n: 70-3374-42
This Firewall to Hood Weatherstrip - Cowl Lacing is designed from the original part for superior fitment and seal. Measuring 67-1/2” long x 1-1/4” wide to provide complete coverage.
Liftgate Weatherstrip
p/n: 20-3144-85
This liftgate weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the sides and top of the liftgate opening directly to the body.
Radiator Splash Shield
p/n: 20-2959-31
This Radiator Splash Shield set is designed from the original part for superior fitment and seal. Set of 4.
Window Felt Beltline Weatherstrips - 3ft Pair
p/n: 30-0244-57
This side window Window Felt Beltline Weatherstrip pair can be used as inner and/or outer. The weatherstrip is flexible, pile lined, rubber covered, with black bead. Available in 3ft pairs.
Splash Apron
p/n: 20-3013-44
This two (2) piece Splash Apron is designed from the original part for superior fitment and seal. This pair attaches to the inner fender to suspension arm.
Vent division bar weatherstrip
p/n: 20-1894-56
Front vent window division post seal. Fully molded with metal core and attaching tabs.
Spring Shackle Bushing Set
p/n: 20-1836-32
This Spring Shackle Bushing Set is for the front of the rear leaf spring. One (1) set completes one spring.
Hood to Cowl Weatherstrip
p/n: 20-0215-43
This Hood to Cowl Weatherstrip is designed from the original part for superior fitment and seal. An exact reproduction using the correct profile dense rubber extrusion.
Body / Cowl To Fender Seals
p/n: 20-0222-44
This Body / Cowl to Fender Seals pair is designed from the original part for superior fitment and function. These filler pieces are die cut from quality masticated rubber to authentic original dimensions.
Hood to Cowl Weatherstrip
p/n: 20-0216-43
This Hood to Cowl Weatherstrip is designed from the original part for superior fitment and seal. An exact reproduction of the original Ford part using dense rubber with pre-installed fastener clips.
Vent division bar weatherstrip
p/n: 20-3042-56
Front vent window division post seal. Fully molded with metal core and attaching tabs.
Splash Apron
p/n: 20-3016-44
This six (6) piece Splash Apron set is designed from the original part for superior fitment and seal. Installs on fender splash apron and bottom of radiator side deflectors.
Hood Bumper Set
p/n: 20-3004-42
This ten (10) piece Hood Bumper set is designed from the original parts for superior fitment and function.
Splash Apron
p/n: 20-1867-45
This four (4) piece Splash Apron pair is designed from the original part for superior fitment and seal. Installs on the fender splash apron.
Splash Apron / A-Arm Dust Shield Filler
p/n: 70-3690-45
This two (2) piece Splash Apron / A-Arm Dust Shield Filler pair is designed from the original part for superior fitment and seal. Filler pieces are die cut from quality masticated rubber to authentic original dimensions. Left and Right pieces fit over suspension a-arms and inside front inner fenders.
Splash Apron / A-Arm Dust Shield Filler
p/n: 70-3691-45
This two (2) piece Splash Apron / A-Arm Dust Shield Filler pair is designed from the original part for superior fitment and seal. Filler pieces are die cut from quality masticated rubber to authentic original dimensions. Left and Right pieces fit over suspension a-arms and inside front inner fenders.
Clutch Rod Boot
p/n: 20-2949-23
This Clutch Rod to Firewall Boot is designed from the original part for superior fitment and seal. This boot makes a weathertight connection for the clutch rod lever as it passes through the firewall.
Air ventilator seal
p/n: 20-2965-31
Seals, air vent damper. Must drill out spot welds to replace the cracked rubber. Includes screws to put back together.
Front Engine Mount
p/n: 20-0018-11
This right or left Front Engine Mount is designed from original for correct fitment and function. Rubber bonded to inner metal core with bolt and mounting holes for durability and proper engine vibration isolation.