Stabilizer Bar Bushings
p/n: 70-4678-34
This Stabilizer Bar to Frame Bushing pair may fit either front or rear stabilizer / sway bars depending on the vehicle. Manufactured with quality materials to original specifications.
Fender Anti-Squeak Weatherstrip
p/n: 20-1864-45
This Fender Anti-Squeak Weatherstrip mounts between the front fender splash apron and the front fender. The weatherstrip is an exact reproduction of the original Ford part. Sold as a seventy-two (72") inch strip.
Steering Column Floorplate
p/n: 20-1694-88
Seal, steering column tube. Installs on top of floor mat.
Radiator Mounting Pads
p/n: 20-0183-31
This Radiator Mounting Pad pair is designed from the original part for superior fitment and function. These upper mounting pads secure and isolate the radiator at its upper mounting point.
Radiator Side Air Deflector
p/n: 20-0192-31
This Radiator Side Air Deflector pair is designed from the original part for superior fitment and function. Left and Right seals are die cut from correct 3/32" masticated rubber to authentic original dimensions. Mounts to core support at side of radiator with included hardware.
Radiator Shroud Seal
p/n: 20-0188-31
Seal, radiator side air deflector. Four (4) inch by fourteen and one eighth (14-1/8) inch.
Radiator Side Air Deflector
p/n: 20-0195-31
This three (3) piece Radiator Side Air Deflector set is designed from the original part for superior fitment and function. Left and Right seals are die cut from correct 3/32" masticated rubber to authentic original dimensions. Mounts to core support at side of radiator with included hardware.
Radiator Top Seal
p/n: 20-0184-31
Seal, top of radiator support to radiator. Twenty four (24) inches long.
Trunk Weatherstrip
p/n: 20-2620-84
This Trunk Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts to the lip on the body surrounding the trunk opening.
Brake and Clutch Pedal Pads
p/n: 20-2452-22
This Brake and Clutch Pedal Pad pair is made from high-quality EPDM rubber for a precise, factory like fit. Manufactured to OEM specifications to install for an authentic fit and finish.
Tailgate Lower Weatherstrip
p/n: 20-2623-85
This Tailgate Lower Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts on the bottom of the tailgate.
Radiator Core Support Seal - At Top
p/n: 20-0196-31
This Radiator Core Support Seal is made from quality EPDM rubber to authentic original dimensions. A direct fit piece that mounts on top of radiator core support with the included hardware.
Radiator Top Seal
p/n: 20-0194-31
Seal, radiator support to bottom of radiator. "L" shaped. Twenty six and three eighths (26-3/8) inches long.
Air Deflector - At Radiator Core Support
p/n: 20-0193-31
This Air Deflector piece is designed from the original part for superior fitment and seal. Piece is die cut from quality masticated rubber to authentic original dimensions. This piece fits at the bottom of radiator core support to frame. Used on V8 models.
Radiator Top Seal
p/n: 20-0181-31
Seal, top of radiator support to hood air deflector. Fifty (50) inches long. For the following engines: 240, 289, 352, 390, 427, or 428.
Vent Window Division Post Weatherstrips
p/n: 20-1892-56
This Front Vent Window Division Post Weatherstrip pair is designed from the original part for superior fitment and seal. This piece mounts on the back edge of the vertical vent window division post.
Fender Skirt Edge Weatherstrip
p/n: 20-1862-44
This Fender Skirt Edge Weatherstrip pair is designed from the original part for superior fitment and seal. For original skirts only this seal fits between fender skirt and rear fender body.
Quarter Window Vertical Leading Edge
p/n: 20-1656-76
This Quarter Window Vertical Leading Edge Weatherstrip pair is designed from the original part for superior fitment, finish and function. This part fits Ford convertible only and is the weatherstrip that holds the quarter window glass in the frame.
Transmission Mount
p/n: 20-1269-11
This Transmission Mount is designed from the original part for a correct fitment. Mounts at the rear of manual and automatic transmissions.
Rear Stone Deflector Seal
p/n: 20-2464-29
This Rear Stone Deflector Seal installs between the rear bumper and body filler splash panel. The seal is used to keep the rear pan from vibrating against the bumper brackets.
Accelerator Pedal Pad
p/n: 20-0678-40
Pedal, accelerator. Molded rubber design. Trucks (F100-200) after Serial #696,001.
Rear Stone Deflector Rubber Ends
p/n: 20-0237-47
These Rear Stone Deflector Rubber Ends install between the body and rear bumper. The seals are an exact reproduction of the original rear bumper to body seals. One (1) pair needed car.
Gravel Deflector Rubber End Shields
p/n: 20-0236-47
This Gravel / Stone End Shield rubber is designed from the original part for superior fitment and usage. One (1) pair per car. This part fits between the vehicle body and rear bumper. For all except Wagons.
Rear Bumper End Filler
p/n: 20-0235-47
This Rear Bumper End Filler pair is designed from the original part for superior fitment and usage. One (1) pair of direct fit stone shields per vehicle. This part fits between the vehicle body and rear bumper ends. For all except Wagons.
Inner Fender Dust Shields
p/n: 20-0221-44
This Inner Fender Dust Shield pair is designed from the original part for superior fitment and function. Filler shield pieces are die cut from quality masticated rubber to authentic original dimensions.
Lower Sash Channel Filler, Door Glass
p/n: 20-0240-58
Channel, door window glass lower rubber. Front or rear doors. One (1) pair does two (2) windows.
Trunk Weatherstrip
p/n: 20-1389-84
This Trunk Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk lid.
Air ventilator seal
p/n: 20-2965-31
Seals, air vent damper. Must drill out spot welds to replace the cracked rubber. Includes screws to put back together.
Emergency Brake Cable Grommet
p/n: 20-2438-20
This Emergency Brake Cable Grommet is used to run the emergency brake cable through the firewall. Designed from the original part for superior fit and seal.