Hood Bumper Set
p/n: 20-0792-42
This Hood Bumper Set is a quality reproduction of the original factory part. These rubber bumpers attach to the front fender to support / cushion the hood closure. Four (4) piece set.
Hood Bumper Set
p/n: 20-0683-42
This six (6) piece Hood Bumper set is designed from the original parts for superior fitment and function. The set fits Ford F-Series Trucks.
Hood Side Bumper
p/n: 20-0953-42
This Hood Side Bumper is a quality reproduction of the original factory part. This rubber bumper mounts on the front fender to support / cushion the hood closure. Usually requires two (2) bumpers each per vehicle.
Hood Side Bumpers
p/n: 20-0791-42
A four (4) piece Hood Side Bumper set that is manufactured to OEM specifications to install for an authentic fit, finish, and function. Reproduction bumpers designed from the original part.
Inside Door Handle Gaskets
p/n: 70-4811-69
This Inside Door Handle Gasket pair is designed from the original part for an authentic fit, finish, and appearance. Slips onto edge of hole where door handle comes out of the door panel.
Instrument Bezel To Bezel Glass Seal
p/n: 70-4941-88
This Instrument Bezel To Bezel Glass Seal is designed from the original part for superior fitment and seal. This part seals the glass to the Instrument Panel / Bezel.
Lower Engine Mount
p/n: 20-0597-11
This Lower Engine Mount is designed from original part for correct fitment and function. Rubber coated over a metal core for durability and proper engine vibration isolation.
Lower Radiator Mount Insulators
p/n: 20-0936-31
This Lower Radiator Mount Insulator pair is designed from the original part for superior fitment and seal. Left and Right lower mounting pads for six (6) or eight (8) cylinder engines.
Moveable Rear Quarter Window Gaskets
p/n: 20-0820-76
This Moveable Rear Quarter Window Gasket pair mounts around the full perimeter of the rear quarter glass and has properly molded corners for a precise, factory fit.
Parking Brake Cable To Floor Seal
p/n: 20-0760-24
This Parking Brake Cable To Floor Seal is designed from the original part for superior fitment, finish and function. The part protects the parking brake cable as it passes through the truck body floor pan.
Parking Light Housing Gaskets
p/n: 20-0612-16
This Parking Light Lens Gasket pair is designed from the original part for superior fitment and seal. This reproduction gasket fits between the Parking Light Housing or Bezel and the body of the vehicle.
Pickup tie down mounting pad
p/n: 20-0885-45
Pad, pickup box tie down hook. Eight (8) required per truck.
Radiator Support Mounting Pad Set
p/n: 20-0642-31
This sixteen (16) piece Radiator Support Mounting Pad Set is designed from the original part for superior fitment and seal. This set is for the radiator support mounting to the vehicle frame. Includes bolt hardware.
Radiator Support to Frame Pad Set
p/n: 20-0772-31
This eighteen (18) piece Radiator Mounting Pad Set is designed from the original parts for a factory like appearance and function. This set fits F100 2-wheel drive models, but will work for F-250 and F-350 models by adding extra metal washers.
Radius Arm & Axle Pivot Bushing Set
p/n: 20-0776-32
This Radius Arm and Axle Pivot Bushing Set is a quality reproduction of the original factory part(s). This six (6) piece strut rod bushing set includes two (2) each C5TZ-3B177-A, two (2) each C5TZ-3B203-C, and two (2) each C5TZ-3B203-B top quality bushings. Fits two-wheel (2WD) drive trucks.
Radius Arm & Axle Pivot Bushing Set
p/n: 20-0779-32
This Radius Arm and Axle Pivot Bushings Set is a quality reproduction of the original factory part(s). This six (6) piece set includes two (2) each C5TZ-3B177-A, two (2) each D9TZ-3B203-A, and two (2) each E6TZ-3B203-A top quality bushings. Fits two-wheel (2WD) drive trucks.
Radius Arm & Axle Pivot Bushing Set
p/n: 20-0777-32
This Radius Arm and Axle Pivot Bushing Set is a quality reproduction of the original factory part(s). This six (6) piece set includes two (2) each C5TZ-3B177-A, two (2) each D5TZ-3B203-C, and two (2) each D5TZ-3B203-D top quality bushings. Fits two-wheel (2WD) drive trucks.
Radius Arm Bushing
p/n: 20-0671-36
This Radius Arm Bushing is a quality reproduction of the original factory part. The bushing fits at the frame end of the radius rod on 4-Wheel Drive models. Requires two (2) bushings per side with four (4) total per vehicle.
Radius Arm Bushing Set
p/n: 20-0778-32
This Radius Arm Bushing Set is a quality reproduction of the original factory part(s). This eight piece set includes four (4) each D6TZ-3B203-A Front Axle bushings and four (4) each D8TZ-3B203-A Frame end bushings. Fits four-wheel (4WD) drive trucks.
Radius Arm Bushing Set
p/n: 20-0780-32
This Radius Arm Bushing Set is a quality reproduction of the original factory part(s). This eight (8) piece includes four (4) each D6TZ-3B203-A Front Axle Bushings and four (4) each C6TZ-3B203-C Frame End Bushings. Fits four-wheel (4WD) drive trucks.
Rear Window Gasket
p/n: 20-0735-81
This Rear Window Gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the back glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation.
Rear Window Gasket - No Groove
p/n: 20-0825-81
This Rear Window Gasket is designed from the original part for superior fitment and seal. The gasket mounts around the full perimeter of the back glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation.
Rear Window Gasket with Groove
p/n: 20-0972-81
This Rear Window Gasket with Groove mounts around the full perimeter of the back glass and has properly molded corners for a precise, factory fit. It also has the groove or slot to accommodate the outer edge's decorative (chrome) molding.
Rear Window Gasket with Sliding Window
p/n: 20-0973-81
This Rear Window Gasket mounts around the full perimeter of the back glass and has vulcanized, or bonded, ends. This gasket is for truck models that have a factory sliding glass rear window. The gasket has a groove for the narrow plastic chrome trim.
Rear Window Gasket with Trim Groove
p/n: 20-0826-81
This Rear Window Gasket is designed from the original part for superior fitment and seal. The gasket mounts around the full perimeter of the back glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation.
Rear Window Gasket with Trim Groove
p/n: 20-0827-81
This Rear Window Gasket is designed from the original part for superior fitment and seal. The gasket mounts around the full perimeter of the back glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation.
Rigid Run Channel
p/n: 20-0813-58
Channel, rigid division bar run. For front edge of door glass. Two (2) required per truck. Use for either right or left side.
Shifter Bushing Set - Column Shift
p/n: 20-1435-26
This Shifter Bushing Set is designed from the original part for superior fitment and function. This bushing set will restore and tighten that loose and sloppy column shift gear selector to a like new condition.
Side Window Glass Run Channel
p/n: 20-0812-58
This Side Window Glass Run Channel is designed from the original part for superior fitment and seal. Single length of flexible window run channel for the sides and top of door windows. For Left or Right side, order two (2) per truck as needed.
Side Window Glass Run Channel
p/n: 20-0716-58
This Side Window Glass Run Channel is designed from the original part for superior fitment and seal. A single five (5) foot length of flexible window run channel for the sides and top of door windows. For Left or Right side, order two (2) per truck as needed.
Side Window Glass Run Channels
p/n: 70-2514-58
This Side Window Glass Run Channel pair is designed from the original part for superior fitment and seal. These two (2) pieces of flexible window run channel are for the sides and top of door windows.
Side Window Weatherstrip Set
p/n: 20-0814-58
This eight (8) piece Side Window Weatherstrip Set is designed from the original part for superior fitment and function. The set comes ready to install and does both front doors.
Side Window Weatherstrip Set
p/n: 20-0720-58
This complete Side Window Weatherstrip Set is designed from the original part for superior fitment and seal. The anti-rattler set includes the back edge of vent window seal installed, beltline weatherstrips w/stainless bead, door glass runs with rivets and vent bar channel with brackets.
Splash Apron / A-Arm Dust Shield Filler
p/n: 70-3486-45
This two (2) piece Splash Apron / A-Arm Dust Shield Filler pair is designed from the original part for superior fitment and seal. Filler pieces are die cut from quality masticated rubber to authentic original dimensions. Left and Right pieces fit over suspension a-arms and inside front inner fenders.
Splash Apron / A-Arm Dust Shield Fillers
p/n: 70-4926-45
This two (2) piece Splash Apron / A-Arm Dust Shield Filler pair is designed from the original part for superior fitment and function. Filler pieces are die cut from quality masticated rubber to authentic original dimensions. Left and Right pieces fit over suspension upper a-arms and inside front inner fenders.
Splash Apron Fender Seal
p/n: 20-0877-44
This Splash Apron Fender Seal pair installs from the inner fender panel to the firewall. Made of high quality EPDM rubber and to the original design for a factory like fit.
Spring Clamp Liner Set
p/n: 20-1272-32
Six (6) piece Spring Clamp Liner Set. The front spring takes eight pieces for both sides and the rear spring takes four pieces for both sides.
Spring Shackle Bushing Set
p/n: 20-0657-32
This Spring Shackle Bushing Set is a complete set for left and right Front Springs.
Spring Shackle Bushing Set
p/n: 20-0655-32
This Spring Shackle Bushing Set is for the front of the front leaf spring. Two (2) sets are needed per truck.
Spring Shackle Bushing Set
p/n: 20-0656-32
This Spring Shackle Bushing Set is for the rear of the front leaf spring. Two (2) sets required per truck.
Stabilizer Bar End Link
p/n: 20-0782-33
This Front Stabilizer Bar End Link is used to smooth the transfer between the sway bar and the control arm. Two (2) end links required per truck. For 4x2 (2 wheel drive) models.
Stabilizer Bar End Link Repair Set
p/n: 20-0783-33
This five (5) piece Stabilizer Bar End Link Repair Set is for the front or rear stabilizer bar. Two (2) per set. Used on Front for 1975-1979 F150-F350 series 4x2. Used on Rear for 1980-1989 F100-F350 series.
Standard Bumper
p/n: 20-0001-88
This Standard Bumper pair is designed from the original part for superior fitment and function. This rubber bumper fits ashtray or glovebox doors.
Stationary Rear Quarter Window Gaskets
p/n: 20-0822-77
This Stationary Rear Quarter Window Gasket pair mounts around the full perimeter of the rear quarter glass and has properly molded corners for a precise, factory fit. For truck models WITH Stainless molding.
Stationary Rear Quarter Window Gaskets
p/n: 20-0821-77
This Rear Quarter Window Gasket pair mounts around the full perimeter of the rear quarter glass and has properly molded corners for a precise, factory fit. For truck models WITHOUT Chrome molding.
Stationary Rear Quarter Window Gaskets
p/n: 20-0823-77
This Rear Quarter Window Gasket pair mounts around the full perimeter of the rear quarter glass and has properly molded corners for a precise, factory fit. For truck models WITH Flexible Plastic Chrome molding.
Steel Sash Channel - Right Front Door
p/n: 20-0811-58
This reproduction Steel Sash Channel is designed from the original part for superior fitment and function. This Right Front Door channel fits in the bottom of door for the glass to sit in.
Steel Sash Channel, Left Side
p/n: 20-0810-58
This reproduction Steel Sash Channel is designed from the original part for superior fitment and function. This channel is for the Left Side only.
Steering Column Floor Seal
p/n: 70-4072-88
This Steering Column Floor Seal is manufactured from die cut masticated rubber to authentic original dimensions. For models with Manual and Power Steering.
Steering Column To Floor Seal
p/n: 20-0674-36
This Steering Column To Floor Seal is designed from the original part for superior fitment and sealing. Seal part is die cut from quality rubber to authentic original dimensions. This part fits around the steering column to seal the column through the body floor pan.
Steering Column To Floor Seal
p/n: 20-0785-36
This Steering Column To Floor Seal is designed from the original part for superior fitment and seal. Restores the cab to floor sealing against the outside elements. For Manual Steering models.
Sun Visor Tips
p/n: 20-2882-88
These Sun Visor Tips are reproductions manufactured to OEM specifications to install for an authentic fit, finish and function. Sold as a pair.
Tailgate Bumper
p/n: 20-0694-45
These Tailgate Bumpers are sold as pair. The bumpers fit in brackets and comes with chains.
Tailgate Bumper
p/n: 20-0801-45
This Tailgate Bumper is used as a retaining support. Two (2) are required per truck.
Top of Door Weatherstrips - Roof Rail
p/n: 70-4022-73
This Top of Door Weatherstrip - Roof Rail pair for the left and right side doors seal the door window frame to the roof hardtop and to the windshield frame.
Turn signal light gasket
p/n: 20-0749-16
Gaskets, side marker light. Front and rear. Four (4) piece set.