Tailgate Bumper Set
p/n: 70-4494-87
This four (4) piece Tailgate Bumper Set is designed from the original part for superior fitment and function. These bumpers fit on each side of the body to tailgate opening at the bottom of the opening and on each side.
Hood to Cowl Weatherstrip
p/n: 20-1090-42
This Hood to Cowl Weatherstrip is designed from the original part for superior fitment and seal. An exact reproduction seal with installation fastener clips included.
Spring Shackle Bushing Set
p/n: 20-1836-32
This Spring Shackle Bushing Set is for the front of the rear leaf spring. One (1) set completes one spring.
Radiator Support To Hood Seal - With A/C
p/n: 20-1082-42
This Radiator Support To Hood Weatherstrip is designed from the original part for superior fitment and seal. This rubber weatherstrip fits at the front of the vehicle to seal between the radiator and the hood when hood is closed. Installation Push-Pins are included.
Steering Column At Floor Seal
p/n: 20-1072-36
This Steering Column At Floor Seal is designed from the original part for superior fitment and sealing. This part fits around the steering column to seal the column at the body floor pan.
Vent division bar weatherstrip
p/n: 20-1894-56
Front vent window division post seal. Fully molded with metal core and attaching tabs.
Voltage Regulator Cover Shield
p/n: 70-4531-17
This Voltage Regulator Cover Shield is designed from the original part for superior fitment and function. This cover shield is located over and above the voltage regulator.
Peel-N-Stick Trunk Weatherstrip
p/n: 20-1389-WT
This Peel-N-Stick Trunk Weatherstrip is designed for superior fitment and seal. The weatherstrip mounts around the full perimeter of the trunk directly to the body. Easy to install 3M Peel-N-Stick backing provides superior adhesion for reliable performance.
Front Door Division Bar Glass Run Channel
p/n: 20-3063-58
This Front Door Division Bar Glass Run Channel is designed from the original part for superior fitment and function. Ready for attaching to your original brackets. Length: 30 inches.
Transmission Mount - Manual
p/n: 20-0043-25
This manual Transmission Mount is designed from the original part for superior fitment and seal. This rear mount fits between the transmission and the crossmember to locate and retain the rear of the engine / transmission powertrain.
Splash Apron
p/n: 20-3013-44
This two (2) piece Splash Apron is designed from the original part for superior fitment and seal. This pair attaches to the inner fender to suspension arm.
Radiator Splash Shield
p/n: 20-2959-31
This Radiator Splash Shield set is designed from the original part for superior fitment and seal. Set of 4.
Window Felt Beltline Weatherstrips - 3ft Pair
p/n: 30-0244-57
This side window Window Felt Beltline Weatherstrip pair can be used as inner and/or outer. The weatherstrip is flexible, pile lined, rubber covered, with black bead. Available in 3ft pairs.
Automatic Transmission Mount
p/n: 20-1003-11
This Automatic Transmission Mount is designed from the original part for superior fitment and seal. This rear mount fits between the transmission and the crossmember to locate and retain the rear of the engine / transmission powertrain.
Upper Engine Mount
p/n: 20-2655-11
This doughnut type Upper Engine Mount is designed from the original part for superior performance and correct fitment.
Body Plug - Rubber Grommet Set
p/n: 20-2703-20
This thirty-three (33) piece Body Plug and Grommet set is designed from the original parts for superior fitment and sealing. Mustang Club of America (MCA) approved.
Window Felt Beltline Weatherstrips
p/n: 70-0555-58
These Window Felt Beltline Weatherstrips are sold as a three (3) foot pair. The beltline is used for side windows inner and/or outer, front and/or rear doors. Available in a 3ft pair.
Beltline Weatherstrips
p/n: 40-0539-57
This Beltline Weatherstrip pair installs on the left and right doors to wipe the inside and outside of the windows when the glass is lowered. Flexible, pile lined, rubber covered, with a black bead. Available in 3ft pair.
Stabilizer Bar Bushing Set
p/n: 20-1717-33
This four (4) piece Stabilizer Bar Bushing set is designed from the original part for superior fitment and function. These are the stabilizer bar to frame mounting bushings.
Window Felt Beltline Weatherstrip - Right Quarter Window
p/n: 20-1900-60
This is a Standard material style Right Side Quarter Window only Window Felt Beltline Weatherstrip pair (also known as beltline weatherstrip). These anti-rattlers come ready to install with finished ends and body curvature bends for a factory like appearance.
Window Felt Beltline Weatherstrip - Left Quarter Window
p/n: 20-1901-60
This is a Standard material style Left Side Quarter Window only Window Felt Beltline Weatherstrip pair (also known as beltline weatherstrip). These anti-rattlers come ready to install with finished ends and body curvature bends for a factory like appearance.
Steel Sash Channel - Left Front Door
p/n: 20-3047-58
This reproduction Steel Sash Channel is designed from the original part for superior fitment and function. This channel is for the Driver (Left) Side Front Door.
Steel Sash Channel - Right Front Door
p/n: 20-3046-58
This reproduction Steel Sash Channel is designed from the original part for superior fitment and function. This channel is for the Passenger (Right) Side Front Door.
Steering Column Seal
p/n: 20-1070-88
This collared Steering Column Floor Seal is designed from the original part for superior fitment and sealing. This gasket is manufactured from top quality EPDM rubber to authentic original dimensions. This part fits around the steering column to seal the column through the body floor pan.
Front Engine Mount
p/n: 20-1786-11
This Front Engine Mount is made of a quality rubber over a metal core to provide maximum life and performance. Two (2) required per car.
Front Engine Mount
p/n: 20-1001-11
Front motor mount support. Left-hand side only. Fairlane big block engines. See description for fitment.
Flexible Run Channel
p/n: 20-1146-58
This Flexible Run Channel helps to eliminate window rattle, provides a smooth sliding surface for glass movement, and works to protect the glass. Stainless steel beaded. Available in sixty (60) inch strips.
U Jamb lock pillar filler
p/n: 20-1195-79
Door lock pillar seal. This part seals the bottom of the rear side window, and may also be known as a door jamb seal.
Flexible Run Channel - 60 Inch
p/n: 20-1619-58
Channel, side window glass, vertical run. Flexible, felt lined, rubber covered channel. Available 60" lengths.
Front Engine Mount
p/n: 20-1000-11
This Front Engine Mount is for the right-hand side only. The mount supports the engine and dampen vibration.
Taillight to Body Gaskets - Gray Rubber
p/n: 20-1018-15
This Taillight to Body Gasket pair is designed from the original part for superior fitment and seal. These reproduction gray rubber gaskets fit between taillight frame housing and the body.
Beltline Weatherstrips
p/n: 70-1121-61
These Beltline Weatherstrips (sometimes called "scraper seal") come in a three (3) foot pair. For use on front, rear, and quarter windows without a chrome reveal molding at the window beltline. Available in 3ft pair.
Taillight to Body Gaskets
p/n: 20-1017-15
This Taillight to Body Gasket pair is designed from the original part for superior fitment and seal. These reproduction gaskets fit between taillight frame housing and the body.
Rear Bumper Stone Deflector Seal
p/n: 20-1868-47
This Rear Bumper Stone Deflector Seal install between the body and rear bumper. This seal is an exact reproduction of the original bumper to body seal. The seal comes complete with installation fasteners.
Clutch Lever Dust Boot
p/n: 20-2712-24
This Clutch Lever Dust Boot covers the opening on your engine bellhousing for manual transmission models. Made from Original Ford tooling.
Rear Bumper To Body Stone Deflector
p/n: 20-1053-29
This Rear Bumper To Body Stone Deflector is designed from the original part for a superior fitment level. This filler piece seals between the rear bumper and the body.
Front Door Inner Dog Leg Weatherstrips
p/n: 20-1767-70
This Front Door Inner Dog Leg Weatherstrip pair is designed from the original part for superior fitment and seal. This rubber weatherstrip installs on inner dog leg of the front door.
Trunk Lid Weatherstrip
p/n: 70-2835-84
This Trunk Lid Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk lid.
Upper Control Arm Shaft
p/n: 20-1278-32
This three (3) piece Upper Control Arm Shaft set is designed from the original part for superior fitment and performance. Renew the performance of your aged and worn front suspension to restore the ride of your classic vintage vehicle.
Rear Window Gasket
p/n: 20-1204-81
This Rear Window Gasket mounts around the full perimeter of the back glass and has properly molded corners for a precise, factory fit. Fitted gasket provides a formed, seamless seal.
Tailgate Window Felt Beltline Weatherstrips
p/n: 80-1082-57
This reproduction authentic style Tailgate Window Felt Beltline Weatherstrip pair is designed from the original part for superior fitment and function. These Innner and Outer anti-rattler window felts wipe the tailgate window glass when the glass is lowered.
Taillight to Body Gaskets
p/n: 20-1019-15
This Taillight to Body Gasket pair is designed from the original part for superior fitment and seal. These reproduction gaskets fit between taillight frame housing and the body.