Body Weatherstrip Kit
p/n: 90-3537-90
This thirteen (13) piece Body Weatherstrip Kit includes the major weatherstrip components needed for the body of your classic restoration vehicle. We’ve put everything together in one simple and convenient kit.
Front Door Vent Window Weatherstrips
p/n: 20-1111-55
These Front Door Vent Window Weatherstrips are designed from the original parts for superior fitment and seal. The pieces are fully molded as left and right using top quality materials.
Window Felt Beltline Weatherstrips
p/n: 20-1123-60
This is a Original equipment style side window horizontal weatherstrip set (also known as beltline weatherstrip). This eight (8) piece anti-rattle set includes inner and outer window felt beltline weatherstrips for each door and quarter window. These window felt pieces have a stainless steel bead.
Front Door Weatherstrips
p/n: 20-1185-72
This Front Door Weatherstrip pair is designed from the original parts for superior fitment and seal. These primary door seals mount with pre-installed pins directly to the left and right doors sealing the full perimeter of the doors against the vehicle body when the door is closed.
Sound Deadener Underlayment Set
p/n: 70-4602-88
This five (5) piece die-cut Sound Deadener Underlayment Set lays under the carpet. This sound deadener will decrease road noise and decrease heat inside the interior compartment. Pre-cut and ready to be installed into your vehicle to improve driving comfort.
Hardtop Roof Rail Weatherstrips
p/n: 20-1160-68
This Hardtop Roof Rail Weatherstrip pair is made of ozone resistant EPDM sponge rubber for a factory like fit. These quality weatherstrips fit on the roof of the vehicle and work to seal the side windows when the window is fully raised.
Division Bar Glass Run Channel
p/n: 20-1113-58
This Division Bar Glass Run Channel pair is designed from the original part for superior fitment and function. This glass run channel holds the glass in place.
Taillight to Body Gaskets
p/n: 20-1019-15
This Taillight to Body Gasket pair is designed from the original part for superior fitment and seal. These reproduction gaskets fit between taillight frame housing and the body.
Rear Window Gasket
p/n: 20-1203-81
This Rear Window Gasket mounts around the full perimeter of the back glass and has properly molded corners for a precise, factory fit. The gasket works with chrome reveal molding trim that inserts into body clips.
Vent Window To Beltline Filler
p/n: 20-1192-73
This Vent Window To Beltline Filler pair is designed from the original part for an authentic fitment and appearance. Filler is the front of the door seal at beltline in front of vent window.
Clutch Lever Dust Boot
p/n: 20-2712-24
This Clutch Lever Dust Boot covers the opening on your engine bellhousing for manual transmission models. Made from Original Ford tooling.
Quarter Window Leading Edge
p/n: 20-1198-80
This Side Quarter Window Vertical Leading Edge Weatherstrip pair is designed from the original part for superior fitment and seal. This part attaches to the vertical edge of the rear side windows when the rear side windows are fully raised.
Front Engine Mount
p/n: 20-1000-11
This Front Engine Mount is for the right-hand side only. The mount supports the engine and dampen vibration.
Front Engine Mount
p/n: 20-1001-11
Front motor mount support. Left-hand side only. Fairlane big block engines. See description for fitment.
Quarter Window Lock Piller Filler
p/n: 20-1194-79
This Quarter Window Lock Piller Filler pair is made from high-quality EPDM rubber for a precise, factory like fit. This filler pair seals the bottom of the rear side window and may also be known as a door jamb seal.
Fender to Radiator Seal
p/n: 20-1101-45
This two (2) piece Fender to Radiator Seal is designed from the original part for superior fitment and seal. Installs between the front fender and the radiator support.
Trunk Weatherstrip
p/n: 20-0302-84
This Trunk Weatherstrip is designed from the original part for superior fitment and seal. The decklid weatherstrip mounts around the full perimeter of the trunk directly to the body.
Front Fender Dust Shield Filler
p/n: 70-3071-45
This six (6) piece Front Fender Dust Shield / Splash Apron set is designed from the original part(s) for superior fitment and seal. Filler pieces are die cut from quality masticated rubber to authentic original dimensions.
Front Fender to Cowl Seal
p/n: 20-1100-45
This two (2) piece Front Fender to Cowl Seal pair is designed from the original part for superior fitment and seal. These seals are also known as lower extension seals.
Accelerator Pedal Pad
p/n: 20-1075-40
This Accelerator Pedal Pad is made of top-quality EPDM rubber with a high level of fit and finish. Designed to be a direct fit reproduction.
Rear Leaf Spring Shackle Assembly
p/n: 20-1066-32
This reproduction Rear Leaf Spring Shackle Assembly is complete with shackle bar plates, rubber bushings and lock nuts. For fitting the suspension leaf spring at its rear spring eye to the vehicle body. Two (2) assemblies required per car.
Headlight Door To Fender Gasket
p/n: 20-1005-14
This Headlight Door To Fender Gasket pair is designed from the original part for superior fitment, appearance and seal. This gray rubber seal fits between the headlight door (bezel) and front fender.
Firewall to Hood Weatherstrip - Cowl Lacing
p/n: 20-1088-42
This Firewall to Hood Weatherstrip is designed from the original part for superior fitment and seal. An exact reproduction of the original profile. This single piece cowl lacing seal mounts at the rear of the engine bay to seal between the hood and vehicle body cowl / firewall.
Parking Light Lens Gaskets
p/n: 20-0167-16
This Parking Light Lens Gasket pair is designed from the original part for superior fitment and seal. This reproduction gasket fits between the Parking Light Lens and the Parking Light Housing or Bezel.
Brake Pedal Pad
p/n: 20-1044-22
Pad, brake pedal. Models with automatic transmission and manual brakes.
Hood to Top of Radiator Weatherstrip
p/n: 20-1083-42
This Hood to Top of Radiator Weatherstrip is designed from the original part for superior fitment and seal. An exact reproduction of the original profile. This weatherstrip installs at the top of the radiator to seal between the radiator and hood.
Radiator Mounting Pads
p/n: 20-0183-31
This Radiator Mounting Pad pair is designed from the original part for superior fitment and function. These upper mounting pads secure and isolate the radiator at its upper mounting point.
Rear Leaf Spring Insulator
p/n: 20-2733-32
This Rear Leaf Spring Insulator is an exact replacement of the rear spring center mount rubber insulator block that mounts below the leaf spring. Four (4) required per vehicle. Fits 2-1/2" leaf spring.
Stabilizer Bar End Link Repair Set
p/n: 20-1068-33
This eleven (11) piece Stabilizer Bar End Link Repair Set is designed to withstand harsh conditions without deteriorating. Two (2) end link sets required per car.
Taillight Lens Gaskets
p/n: 20-1011-15
This Taillight Lens Gasket pair is designed from the original part for superior fitment and seal. This reproduction gasket fits between the taillight lens and taillight housing. For all models except Station Wagons.
Front suspension bumper
p/n: 20-1062-32
Bumper, front suspension. Bumper section is 1-5/8" tall, 2" long, and 1-3/8 wide.
Clutch Pedal Rod Boot
p/n: 20-1049-23
This Clutch Pedal Rod Boot is designed from the original part for superior fitment and seal. Accordion style boot seals the clutch rod to the floor.
Back Up Light Lens Gasket Set
p/n: 20-1029-17
This four (4) piece Back Up Light Lens Gasket Set is designed from the original part for superior fitment and seal. These reproduction gaskets fit between the back-up light lens and the back-up light housing or light bezel. Two (2) gaskets per lens.
Vent Window Frame Seal
p/n: 20-1112-56
This is the Vent Window Frame Seal for the outer edge of vent window frame to front door. This special thin strip glues (adhesive is not included) on vent window frame and stops water from leaking between the vent window frame and the front door.
Quarter Panel Drain Plugs
p/n: 20-2769-45
This Quarter Panel Drain Plug pair is a quality reproduction of the original factory part. These rubber plugs fit inside the quarter panel area to seal-out weather and environmental elements.
Steering Column Lower Flange Insulator
p/n: 20-1532-88
This Steering Column Lower Flange Insulator is designed from the original part for superior fitment and function. This insulator fits around the lower steering column inside the vehicle to prevent metal to metal contact.
Steering Column To Floor Seal
p/n: 20-1071-36
This Steering Column is designed from the original part for superior fitment and sealing. Seal part is die cut from quality masticated rubber to authentic original dimensions. This part fits around the steering column to seal the column through the body floor pan inside the vehicle.
Adjustable Hood Bumper
p/n: 70-2715-42
This Radiator Support to Hood Bumper is a quality replacement for the original factory part. This adjustable bumper attaches to the radiator support to cushion / stop the hood closure. Usually requires two (2) front bumpers each per vehicle.
Parking Light Lens Gaskets
p/n: 20-1025-16
This Parking Light Lens Gasket pair is designed from the original part for superior fitment and seal. This reproduction gasket fits between the Parking Light Lens and the Parking Light Housing or Bezel.
