Front Stabilizer Bar End Link Set
p/n: 20-0037-33
This eleven (11) piece Front Stabilizer Bar End Link Set is designed from original parts so it fits correctly. Two (2) kits / sets required per car as one (1) kit / set services one side of front stabilizer bar.
Front Suspension Bumper
p/n: 20-0034-32
Bumper, front suspension upper arm. Three eighths (3/8) inch by three fourths (3/4) inch bolt, twenty four (24) threads.
Front Suspension Bumper
p/n: 20-0080-32
Bumper for front suspension upper arm. Measures three eighths (3/8) inch by sixteen (16) by eleven sixteenths with (11/16) inch bolt thread.
Fuel filler cover bumper
p/n: 20-0006-41
Bumpers, fuel tank door. Single stem and double retainer bumper set.
Fuel Neck Grommet
p/n: 20-1849-39
Grommet, fuel filler neck. Outside diameter: 3-3/8" Inside diameter: 2"
Glovebox Arm Bumper Stop
p/n: 20-1399-88
Stop, glovebox arm.Ford Truck 1957-64 Stop, glovebox arm. Requires 2 each. Ford Cars 1955-68 Bumper, glovebox door check arm stop.
Glovebox bumper
p/n: 20-2391-88
Bumpers, glovebox door.Ford Cars 1960 Bumpers, fuel tank door. All Galaxie models. Ford Truck 1935-47 Bumpers, glovebox door.
Glovebox or Fuel Tank Filler Door Bumpers
p/n: 20-1220-88
This Glovebox or Fuel Tank Filler Door Bumper pair is a quality reproduction of the original factory part. This push on rubber bumper attaches to support / cushion the glovebox or filler door closure.
Hinge Pillar Weatherstrip
p/n: 20-0132-63
Convertible Hinge Pillar Weatherstrip - Attaches to the body and seals between the A-pillar post and the front section of the door or vent window frame when the door is closed.
Hinge Pillar Weatherstrip
p/n: 20-1760-63
Convertible Hinge Pillar Weatherstrip - Attaches to the body and seals between the A-pillar post and the front section of the door or vent window frame when the door is closed.
Hood bumper
p/n: 20-0041-42
Bumpers, rear of hood to top of fender. Two (2) required per vehicle.Ford Cars 1961-64 Bumpers, rear of hood to top of fender. Requires 2 pair for hood.
Hood Bumper
p/n: 20-0014-42
Bumpers, hood front to radiator support. Five sixteenths (5/16) inch by twenty four (24) thread.
Hood Bumper Set
p/n: 20-0078-42
This eight (8) piece Hood Bumper set is designed from the original parts for superior fitment and function.
Hood Bumper Set
p/n: 20-0032-42
This six (6) piece Hood Bumper set is designed from the original parts for superior fitment and function.
Hood To Fender Bumper Set
p/n: 20-0033-42
This four (4) piece Hood to Fender Bumper Set is a quality reproduction of the original factory part. This rubber bumper attaches to the front fender to support / cushion the hood closure.
Left Engine Mount
p/n: 20-0085-11
This Front Left Engine Mount is designed from the original part for superior fitment and function. Uses quality rubber for proper engine vibration isolation.
Left Engine Mount
p/n: 20-0057-11
This Front Left Engine Mount is designed from original part for correct fitment and function. Rubber coated over a metal core for durability and proper engine vibration isolation.
Lower Door and Fuel Tank Door Bumpers
p/n: 20-0004-71
Manufactured to OEM specifications this Lower Door and Fuel Tank Door Bumper pair installs for an authentic fit, finish and function. Five eighths (5/8") inches high. Installs on door jamb where rear of door closes against body and on rear lower part of door.
Main Wiring Loom Grommet
p/n: 20-1811-20
This Main Wiring Loom Grommet is used to run the main wiring loom to the firewall without being damaged by sheet metal. Designed from original part so it fits correctly.
Masticated Rubber Sheet
p/n: 70-0645-45
This Masticated Rubber Sheet is three-thirty seconds (3/32) inch thick. The rubber sheet contains random milled cotton cord reinforcement for front end splash aprons, etc.
Parking Light Lens Gaskets
p/n: 20-0045-16
This Parking Light Lens Gasket pair is designed from the original part for superior fitment and seal. This reproduction gasket fits between the Parking Light Lens and the Parking Light Housing or Bezel.
Peel-N-Stick Trunk Weatherstrip
p/n: 20-1389-WT
This Peel-N-Stick Trunk Weatherstrip is designed for superior fitment and seal. The weatherstrip mounts around the full perimeter of the trunk directly to the body. Easy to install 3M Peel-N-Stick backing provides superior adhesion for reliable performance.
Quarter and Side Window Leading Edge
p/n: 20-1954-80
This Quarter and Side Window Vertical Leading Edge Weatherstrip pair is designed from the original part for superior fitment and seal. A reproduction manufactured to OEM specifications to install for an authentic fit and finish.
Quarter Window Lower Front Corner Seals
p/n: 20-0024-79
This Quarter Window Lower Front Corner seal pair is designed from the original part for superior fitment and seal. A fully molded reproduction of the original for convertible and hardtop models.
Quarter Window Pads
p/n: 20-3124-79
This Quarter Window Pad pair is designed from the original part for superior fitment and seal. This is the front lower corner quarter window pad for Hardtops, Convertibles and Retractable Hardtop models.
Quarter Window Seals
p/n: 20-1953-79
This Left and Right Quarter Window Seal pair is designed from the original part for superior fitment and seal. This part seals the bottom of the rear quarter window and may also be known as a door jamb seal.
Radiator Mounting Pad Set
p/n: 20-0112-31
This five (5) piece Radiator Mounting Pad Set is designed from the original part for superior fit and support. These shims are installed between the radiator and radiator core support.
Radiator Mounting Pads
p/n: 20-0183-31
This Radiator Mounting Pad pair is designed from the original part for superior fitment and function. These upper mounting pads secure and isolate the radiator at its upper mounting point.
Radiator shroud seal
p/n: 20-0114-31
Seal, radiator air deflector side for right side. Includes special plastic buttons to install.
Radiator top seal
p/n: 20-0130-31
Seal, radiator support top to hood. Includes special plastic buttons to install. For models with A/C.
Rear Bumper Stone Deflector
p/n: 20-0047-47
This Rear Bumper Stone Deflector is used to keep road debris from coming up and damaging your vehicle. This seal is an exact reproduction of the original rear bumper to body seal.
Rear Bumper Stone Deflector
p/n: 20-0131-47
This Rear Bumper Stone Deflector is an exact reproduction of the original rear bumper to body seal. This seal is used to keep road debris from coming up and damaging your vehicle.
Rear Bumper Stone Deflector
p/n: 20-0079-47
This Rear Bumper Stone Deflector is used to keep road debris from coming up and damaging your vehicle. The seal is an exact reproduction of the original rear bumper to body seal.
Rear Door Weatherstrip
p/n: 20-0082-72
This Rear Door Weatherstrip pair is designed from the original parts for superior fitment and seal. These rear door seals mount directly to the left and right doors sealing the full perimeter of the doors against the vehicle body when the door is closed.
Rear Door Weatherstrips
p/n: 20-0048-72
This Rear Door Weatherstrip pair is designed from the original part for superior fitment and seal. These primary door weatherstrips mount (glue-on) directly to the left and right doors sealing the full perimeter of the doors against the vehicle body when the door is closed.
Rear Door Weatherstrips
p/n: 20-0065-72
This Rear Door Weatherstrip pair is designed from the original part for superior fitment and seal. These primary door weatherstrips mount (glue-on) directly to the left and right rear doors sealing the full perimeter of the doors against the vehicle body when closed.
Rear Spring Pad
p/n: 20-1275-32
This Rear Spring Pad is used as a spring insert silencer. The leaf spring insulator installs between the leaves.
Rear Transmission Mount
p/n: 20-0090-25
This Transmission Mount is designed from the original part for superior fitment and function. This rear mount fits between the transmission and the crossmember to locate and retain the rear of the engine / transmission powertrain. Automatic and Manual transmissions.
Rear Window Gasket
p/n: 20-0049-81
This Rear Window Gasket mounts around the full perimeter of the back glass and has properly molded corners for a precise, factory fit. It also has the slot to accommodate the outer edge's decorative molding.
Rear Window Gasket
p/n: 20-1962-81
This Rear Window Gasket mounts around the full perimeter of the back glass and has properly molded corners for a precise, factory fit. It also has the slot to accommodate the outer edge's decorative molding.
Rear Window Gasket
p/n: 20-1956-81
This Rear Window Gasket mounts around the full perimeter of the back glass and has properly molded corners for a precise, factory fit. It also has the slot to accommodate the outer edge's decorative molding.
Retractable Front Roof Weatherstrip
p/n: 20-1935-67
Weatherstripping, front roof rear. Has special molded ends.
Retractable Hardtop Roof Rail Weatherstrips
p/n: 20-1916-65
This Retractable Roof Rail Weatherstrip pair is designed from the original part for superior fitment and seal. These roof rails seals fit on the folding roof of the vehicle and seal the side windows when the window is fully raised.
Retractable roof weatherstrip
p/n: 20-1922-67
Seals, body to rear side of top. Glues to top of quarter where sides of top set on body when top is up.
Retractable roof weatherstrip
p/n: 20-1934-67
Weatherstripping, rear roof front. Seal has special molded ends.
Retractable roof weatherstrip
p/n: 20-1921-67
Pads, flapper. (Front of top rests on when top is down.) Glues to top of wheel well.
Retractable roof weatherstrip
p/n: 20-1933-67
Weatherstripping, front roof side assembly. Cloth covered like original. Installs on side of flapper.
Retractable roof weatherstrip
p/n: 20-1927-67
Weatherstripping, rear roof side. Glues on top of rear quarter.
Right Engine Mount
p/n: 20-0058-11
This Front Right Engine Mount is designed from original part for correct fitment and function. Rubber coated over a metal core for durability and proper engine vibration isolation.
Right Engine Mount
p/n: 20-0084-11
This Front Right Engine Mount is designed from the original part for superior fitment and function. Uses quality rubber for proper engine vibration isolation.
Rigid Run Channel
p/n: 20-1747-58
Channel, door glass run. Lock side. Rear of front door. This glass run installs on your original brackets.
Shifter Bushing Set - Column Shift
p/n: 20-1435-26
This Shifter Bushing Set is designed from the original part for superior fitment and function. This bushing set will restore and tighten that loose and sloppy column shift gear selector to a like new condition.
Side Window Vertical Leading Edge
p/n: 20-1951-80
This side to quarter window Vertical Leading Edge pair attaches to the vertical edge of the rear side windows when the rear side windows are fully raised. This molded rubber weatherstrip pair does not include the chrome piece that attaches directly to the glass.
Side Window Vertical Leading Edge
p/n: 20-0109-80
This Side Window Vertical Leading Edge Weatherstrip pair is designed from the original part for superior fitment and seal. This part attaches to the vertical edge of the rear side windows when the rear side windows are fully raised.
Splash Apron
p/n: 20-1867-45
This four (4) piece Splash Apron pair is designed from the original part for superior fitment and seal. Installs on the fender splash apron.