Taillight Lens Gaskets - Inner and Outer
p/n: 20-1410-15
This four (4) piece Taillight Lens Gasket set is designed from the original part for superior fitment and seal. These inner and outer reproduction gaskets fit between taillight lens and taillight housing bezel.
Taillight Lens to Housing Gaskets
p/n: 20-2408-15
This Taillight Lens to Housing Gasket pair is designed from the original part for superior fitment and seal. These reproduction gaskets fit between the taillight lens and the taillight housing.
Taillight Mounting Pad
p/n: 70-2583-15
Pads, taillight housing to body. Machine die cut to exact original dimensions. Constructed of high quality, long lasting sponge rubber. Replaces factory #C4GY-13420-A.
Taillight Mounting Pads
p/n: 20-2407-15
This Taillight Mounting Pad pair is designed from the original part for superior fitment and sealing. These reproduction gaskets fit between taillight frame housing and the body.
Taillight Mounting Pads
p/n: 20-2413-15
This Taillight Mounting Pad pair is designed from the original part for superior fitment and sealing. These reproduction gaskets fit between taillight frame housing and the body.
Tie Rod Dust Covers
p/n: 20-2484-36
This Tie Rod Dust Cover, drag link seal, is sold as a four (4) piece set. The seals are designed from originals for proper fitment.
Top Motor Grommet Set
p/n: 20-1637-67
This Top Motor Grommet Set contains three (3) pieces that are used for the top motor to the firewall bracket. Designed from the original part for superior fit and seal.
Top of Door Weatherstrips
p/n: 20-1645-73
This Top of Door Weatherstrip pair is designed from the original part for superior fitment, finish and function. The weatherstrip mounts on the vehicle body from approximately just above the door hinge to near the beltline on the lock side of the car.
Top Of Door Weatherstrips
p/n: 20-1646-73
This Top of Door Weatherstrip is designed from the original part for superior fitment, finish and function. One weatherstrip is enough for two doors. Cut to fit as needed for each upper door openings.
Transmission Mount - Manual
p/n: 20-0043-25
This manual Transmission Mount is designed from the original part for superior fitment and seal. This rear mount fits between the transmission and the crossmember to locate and retain the rear of the engine / transmission powertrain.
Trunk Bumper
p/n: 70-2741-87
Bumpers, adjustable trunk. Screws into trunk. Two (2) required per car.
Trunk Compartment Door Handle Pad
p/n: 20-2630-86
This Trunk Compartment Door Handle Pad is designed from the original part for superior fitment, appearance and function. This unique mounting pad fits between the door handle and the trunk luggage compartment door.
Trunk Decklid Weatherstrip
p/n: 70-2743-84
This Trunk Decklike Weatherstrip is designed from the original part for superior fitment and seal. The weatherstrip mounts around the full perimeter of the trunk directly to the body.
Trunk Decklid Weatherstrip
p/n: 20-0095-84
This Trunk Decklid Weatherstrip is designed from the original part for superior fitment and seal. The weatherstrip mounts around the full perimeter of the trunk directly to the body.
Trunk Decklid Weatherstrip
p/n: 20-2858-84
This Trunk Deckid Weatherstrip is designed from the original part for superior fitment and seal. The weatherstrip mounts around the full perimeter of the trunk lid.
Trunk Handle Base Mounting Pad
p/n: 20-2385-86
This Trunk Handle Base Mounting Pad is designed from the original part for superior fitment, appearance and function. This correctly shaped with beaded edge mounting pad fits between the trunk handle base and the trunk compartment door.
Trunk Lid Weatherstrip
p/n: 70-2835-84
This Trunk Lid Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk lid.
Trunk Lid Weatherstrip
p/n: 20-0042-84
This Trunk Lid Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk lid.
Trunk Weatherstrip
p/n: 20-2867-84
This Trunk Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.
Trunk Weatherstrip
p/n: 20-1687-84
This Trunk Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.
Trunk Weatherstrip
p/n: 20-1685-84
This Trunk Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.
Trunk Weatherstrip
p/n: 20-1688-84
This Trunk Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.
Trunk Weatherstrip
p/n: 70-3346-84
This Trunk Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.
Trunk Weatherstrip
p/n: 20-2618-84
This Trunk Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk lid.
Trunk Weatherstrip
p/n: 82-0217-84
This Trunk Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.
Trunk Weatherstrip
p/n: 20-1689-84
This Trunk Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.
Trunk Weatherstrip
p/n: 20-2862-84
This Trunk Weatherstrip is designed from the original part for superior fitment and seal. The decklid weatherstrip mounts around the full perimeter of the trunk directly to the body.
Trunk Weatherstrip
p/n: 20-1686-84
This Trunk Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.
Trunk Weatherstrip
p/n: 20-0302-84
This Trunk Weatherstrip is designed from the original part for superior fitment and seal. The decklid weatherstrip mounts around the full perimeter of the trunk directly to the body.
T-Top Beaded Felt Weatherstrip
p/n: 70-4651-68
This T-Top Beaded Felt Weatherstrip is designed from the original part for superior fitment, finish and function. This felt weatherstrip installs at the front and rear edges of the roof at the T-Top opening. Sold Individually - Purchase two (2) if replacing both Front and Rear.
T-Top Headliner Retainer
p/n: 70-4652-88
This T-Top Headliner Retainer is designed from the original part for superior fitment, finish and function. This retainer strip pinches the headliner to the body to hold it in place. Sold Individually - Purchase two (2) to complete the driver and passenger overhead panel.
T-Top Roof Rail on Body Weatherstrip
p/n: 20-2815-68
This T-Top Roof Rail on Body Weatherstrip is the inner seal between the T-Top panel and the body. The pillar length measures approximately thirty (38) inches.
T-Top Roof Rail on Body Weatherstrips
p/n: 20-2816-68
This T-Top Roof Rail on Body Weatherstrips are the inner seal between the T-Top panel and the body. Molded as Left and Right sides for the vehicle.
T-Top Trim Panel to Latch Handle Seals
p/n: 20-2806-67
This T-Top Trim Panel to Latch Handle Seal pair is designed from the original part for superior fitment and seal. These seals glue onto the plastic trim panel where latch handle goes through the panel.
T-Top Weatherstrips
p/n: 20-2814-68
This T-Top Weatherstrip fits on the removable roof inserts of the vehicle and seals the side window when the window is fully raised.
U Jamb lock pillar filler
p/n: 20-1195-79
Door lock pillar seal. This part seals the bottom of the rear side window, and may also be known as a door jamb seal.
U Jamb Lock Pillar Filler
p/n: 20-3123-79
Door lock pillar seal. This part seals the bottom of the rear side window, and may also be known as a door jamb seal.
Ulta-Mat Floor Heat and Sound Underlayment Set
p/n: 70-4781-88
This seven (7) piece Ulta-Mat Floor Heat and Sound Underlayment Set is pre-cut for a direct-fit installation. Underlayment pieces are made from a flexible and lightweight foil facing foam rubber sound and heat insulation material.
Ulta-Mat Headliner Heat and Sound Underlayment
p/n: 70-4783-88
This Ulta-Mat Headliner Heat and Sound Underlayment pair is pre-cut for a direct-fit installation. Underlayment pieces are made from a flexible and lightweight foil facing foam rubber sound and heat insulation material.
Ulta-Mat Kick Panel Heat and Sound Underlayment
p/n: 70-4782-88
This Ulta-Mat Kick Panel Heat and Sound Underlayment is pre-cut for a direct-fit installation. Underlayment pieces are made from a flexible and lightweight foil facing foam rubber sound and heat insulation material.
Ulta-Mat Package Tray Heat and Sound Insulator Underlayment
p/n: 70-4780-88
This Ulta-Mat Package Tray Heat and Sound Insulator Underlayment is pre-cut for a direct-fit installation. Underlayment pieces are made from a flexible and lightweight foil facing foam rubber sound and heat insulation material.
Ulta-Mat Quarter Panel Heat and Sound Underlayment
p/n: 70-4784-88
This Ulta-Mat Quarter Panel Heat and Sound Underlayment pair is pre-cut for a direct-fit installation. Underlayment pieces are made from a flexible and lightweight foil facing foam rubber sound and heat insulation material.
Ulta-Mat Trunk Divider Heat and Sound Underlayment
p/n: 70-4777-88
This Ulta-Mat Trunk Divider Heat and Sound Underlayment is a die cut insulator material for the trunk divider piece. Underlayment pieces are made from a flexible and lightweight foil facing foam rubber sound and heat insulation material.
Upper Control Arm Bumper
p/n: 20-2727-32
This Upper Control Arm Bumper is designed from the original part for superior fitment and function. A molded rubber bumper which serves as a bump stop for the front suspension.
Upper Control Arm Bumper
p/n: 20-2725-32
Upper Control Arm Bumper made with top quality rubber. Includes nut.
Upper Control Arm Shaft
p/n: 20-1278-32
This three (3) piece Upper Control Arm Shaft set is designed from the original part for superior fitment and performance. Renew the performance of your aged and worn front suspension to restore the ride of your classic vintage vehicle.
Upper Engine Mount
p/n: 20-1538-11
This Front or Rear Upper Engine Mount reproduction is designed from the original part for superior fitment and durability. This mount fits between the engine and chassis to support the engine and reduce harmonic vibrations.
Upper Tailgate Weatherstrip
p/n: 20-3143-85
This Upper Tailgate Weatherstrip is designed from the original part for superior fitment and seal. The weatherstrip mounts on the top of the tailgate.
Vent division bar weatherstrip
p/n: 20-3042-56
Front vent window division post seal. Fully molded with metal core and attaching tabs.
Vent division bar weatherstrip
p/n: 20-3040-56
Front vent window division post seal. Fully molded with metal core and attaching tabs.
Vent Division Bar Weatherstrip
p/n: 20-3043-56
This Front Vent Division Bar Weatherstrip is fully molded with metal core and attaching tabs.
Vent division bar weatherstrip
p/n: 20-2534-56
Front vent window division post seal. Fully molded with metal core and attaching tabs.
Vent Division Bar Weatherstrip
p/n: 20-2533-56
This Front Vent Division Bar Weatherstrip is fully molded with metal core and attaching tabs.
Vent division bar weatherstrip
p/n: 20-1478-56
Front vent window division post seal. Fully molded with metal core and attaching tabs.
Vent division bar weatherstrip
p/n: 20-0021-56
Front vent window division post seal. Fully molded with metal core and attaching tabs.
Vent division bar weatherstrip
p/n: 20-0106-56
Front vent window division post seal. Fully molded with metal core and attaching tabs.
Vent division bar weatherstrip
p/n: 20-1479-56
Front vent window division post seal. Fully molded with metal core and attaching tabs.
Vent Division Bar Weatherstrips
p/n: 20-0469-56
This Front Vent Division Bar Weatherstrip pair is an extruded rubber strip only that will have to be attached to division post. Sold as a pair for the drivers (LH) and passenger (RH) doors.
Vent Window Division Bar Weatherstrip
p/n: 20-2532-56
This Front Vent Window Division Bar Weatherstrip is fully molded with metal core and attaching tabs.
Vent Window Division Bar Weatherstrips
p/n: 70-3630-56
This Front Vent Window Division Post Weatherstrip pair is designed from the original part for superior fitment and seal. This piece mounts on the vertical division bar with rivets and the vent glass closes against it. Fully molded with metal core and pre-drilled holes.