Body Mounting Pad Set
p/n: 70-3200-48
This twenty-eight (28) piece Body Mounting Pad set is designed from the original parts for superior fitment and function. Designed from original parts, made from rubber with steel core.
Suspension Bushing
p/n: 30-0385-36
Bushing and pin assembly, cartridge, Inlox type, front wheel lower support arm inner pin. Shipped with instructions for re-installing.Length: 5.75 inches.
Suspension Bushing
p/n: 30-0386-36
Bushing and pin assembly cartridge. Inlox type, front wheel lower support arm inner pin. Shipped with instructions for reinstalling.Length: 5.75 inches.
Spring Shackle Bushing Set
p/n: 20-0657-32
This Spring Shackle Bushing Set is a complete set for left and right Front Springs.
Front spring bushing
p/n: 30-0391-32
Bushing assembly, front wheel support; upper and outer. Inlox type cartridge bushing assembly.
Stabilizer Bar Bushing Set
p/n: 20-1841-33
This twenty-six (26) piece Stabilizer Bar Bushing Set for the front is used to allow the rod to flex and rotate, but stays in place where it is attached to the vehicle frame.
Stabilizer Bar Frame Bushing Set
p/n: 20-1842-33
This twenty-six (26) piece Stabilizer Bar Frame Bushing Set is for the front and allows the rod to flex and rotate, but stays in place where it is attached to the vehicle frame.
Front spring bushing
p/n: 30-0393-32
Bushing assembly, front wheel support; upper and outer. Inlox type cartridge bushing assembly.
Spring Shackle Bushing
p/n: 30-0344-32
Bushing, rear spring and shackle. One and one eighth (1-1/8) inch diameter with nine sixteenths (9/16) inch hole. One set contains twelve (12) pieces.
Spring Eye Bushing
p/n: 30-0372-32
Bushing, rear spring eye leaf and shackle. Nine sixteenths (9/16) inch inside diameter, one and three eighths (1-3/8) inch barrel.
Spring Shackle Bushing Set
p/n: 20-0655-32
This Spring Shackle Bushing Set is for the front of the front leaf spring. Two (2) sets are needed per truck.
Spring seat service
p/n: 60-0619-35
Seat, rear spring. Revulcanization service only. Send in complete casting with metal sleeve bushing.
Rear axle bushing
p/n: 25-0081-32
Insulators, rear axle housing, upper and lower. Four (4) piece set.
Front suspension bushing
p/n: 30-0239-32
Bushings, front suspension torque arm. Necessary for proper front end geometry.
Leaf Spring Shackle Set
p/n: 20-1064-32
This Leaf Spring Shackle Set is manufactured to OEM specifications to install for an authentic fit and finish. Rear of rear spring shackle bars and bolt assembly with rubber bushings. Two (2) sets required per car.
Spring Shackle Bushing Set
p/n: 20-0083-33
This Spring Shackle Bushing Set is for the front of rear leaf spring. Designed from original parts for a precise, factory fit. Two (2) sets required per car.
Spring Shackle Bushing Set
p/n: 20-0656-32
This Spring Shackle Bushing Set is for the rear of the front leaf spring. Two (2) sets required per truck.
Spring Shackle Bushing Set
p/n: 20-0550-32
This Spring Shackle Bushing Set is used on both springs. This kit does NOT include the shackle bars used on the front of the spring.
Spring Shackle Bushing Set
p/n: 20-0650-32
This Spring Shackle Bushing Set is a complete set for front springs. This set includes two (2) #APA-5631 and two (2) #B7C-5304-A.
Shock absorber bushing
p/n: 30-0407-33
Bushings, shock absorber. Set includes eight (8) large and eight (8) smaller bushings.
Lower Suspension Arm Dust Seal Set
p/n: 70-0865-32
This four (4) piece Lower Suspension Arm Dust Seal Set is fully molded of high-quality EPDM dense rubber for durability and proper fitment. These seals are used to protect your lower suspension arm bushings from dust and debris.
Stabilizer Bushing
p/n: 30-0483-33
Bearings, stabilizer rear rod. Requires two (2) per car. Fully molded rubber.
Stabilizer Bushing
p/n: 30-0484-33
Bearings, stabilizer front rod. Requires two (2) per car. Fully molded rubber.
Engine Mount Pad
p/n: 30-0331-11
This Engine Mount Pad pair is used as a support at the timing gear cover. One (1) pair required per car. Sold only in pairs.
Radius Arm Bushing Set
p/n: 20-0780-32
This Radius Arm Bushing Set is a quality reproduction of the original factory part(s). This eight (8) piece includes four (4) each D6TZ-3B203-A Front Axle Bushings and four (4) each C6TZ-3B203-C Frame End Bushings. Fits four-wheel (4WD) drive trucks.
Stabilizer Bushing
p/n: 60-0316-34
Bushing, front stabilizer shaft. Two (2) per car.Length: 1.875 inches. Width: 1.6875 inches. Height: 1.4375 inches.
Axle Rebound Pad
p/n: 70-1289-32
Bushing, rear support arm. Rear upper. Four (4) per car. For lower see #70-1290-32.
Axle Rebound Pad
p/n: 70-1290-32
Bushing, rear support arm. Rear lower. Four (4) per car. For upper see #70-1289-32.
Brown Starter Rod Boot
p/n: 40-0257-89
Boot, starter rod through toe board, tall style. Brown rubber. For black see our #40-0257-21. One and five eighths (1-5/8) inch high with steel bushing.
Stabilizer Bushing
p/n: 70-0627-33
Bushings, stabilizer bar, front. Fully molded rubber. One and three fourths inch (1 3/4") length by one and one half inch (1 1/2") width by three fourths inch (3/4") inside hole diameter by one and five eighths inch (1 5/8") height.
Front Stabilizer Bar Bushings
p/n: 27-0014-34
Front Stabilizer Bar to Frame Bushing pair for both sides of the vehicle. Each bushing measures 2-1/8 x 11/16 x 1-11/16 inches.
Spring Shackle Bushing Set
p/n: 20-1581-33
This Spring Shackle Bushing Set is for the rear leaf springs. This set is an original steel stud type.
Brown Starter Rod Boot
p/n: 40-0258-89
Boot, starter rod through toe board, short style. Brown rubber. For black see our #40-0258-21. One and one fourth (1-1/4) inch high with steel bushing.
Prop shaft retainer bushing
p/n: 70-2268-27
Retainer, intermediate bearing. All models with two piece driveshafts.
Front Stabilizer Bushing
p/n: 70-0348-33
Bushings, front stabilizer bar mounting. Fully molded rubber. One and thirteen sixteenths inch (1 13/16") length by one and three eighths inch (1 3/8") width by eleven sixteenths inch (11/16") inside hole diameter by one and one half inch (1 1/2") height.
Rear Stabilizer Bushing
p/n: 70-0406-33
Bushings, rear stabilizer. Comes as a four (4) piece set. Fully molded rubber.
Upper Control Arm Shaft
p/n: 20-1278-32
This three (3) piece Upper Control Arm Shaft set is designed from the original part for superior fitment and performance. Renew the performance of your aged and worn front suspension to restore the ride of your classic vintage vehicle.
Spring Shackle Bushing Set
p/n: 20-0066-33
This Spring Shackle Bushing Set is for the rear of rear leaf spring. This set is made with original style rubber bushings. Two (2) sets are required per car.
Suspension bushing
p/n: 30-0339-36
Bushing, insulator, front suspension lower support arm, inner. Four (4) piece set.
Suspension bushing
p/n: 30-0335-36
Bushing, insulator, torque arm to frame at rear. Four (4) piece set.
Front Stabilizer Bar Bushing
p/n: 70-1293-33
A Front Stabilizer Bar to Frame Bushing pair for both sides of the vehicle. Fits front stabilizer or sway bar. Manufactured with quality materials to original specifications. One (1) pair per vehicle.
Front Stabilizer Bushing
p/n: 70-0193-33
Bushings, front stabilizer bar. Fully molded rubber. One and five eighths inch (1 5/8") length by one and seven sixteenths inch (1 7/16') width by three fourths inch (3/4") inside hole diameter by one and eleven sixteenths inch (1 11/16") height.
Spring Shackle Bushing Set
p/n: 20-1580-33
This Spring Shackle Bushing Set is for the front leaf springs. This set is an original steel stud type.
Front Stabilizer Bushing
p/n: 50-0170-34
Bushings, front stabilizer bar mounting. Fits original bracket. Fully molded rubber. One and five eighths inch (1 5/8") length by one and three eighths inch (1 3/8") outside diameter by eleven sixteenths inch (11/16") inside hole diameter.
Rear Stabilizer Bushing
p/n: 50-0171-34
Bushings, rear stabilizer bar mounting. Fully molded rubber. One and one half inch (1 1/2") length by one and one fourth inch (1 1/4" outside diameter by nine sixteenths inch (9/16") inside hole diameter.
Front Stabilizer Bushing
p/n: 30-0363-33
Bearings or bushings, front stabilizer rod. One (1) pair used per vehicle. Fully molded rubber.
Track Bar Bushing
p/n: 50-0527-34
Bushing, track bar. Molded out of BUNA rubber with correct metal sleeve like original.Height: 1.875 inches.
Front Stabilizer Bushing
p/n: 70-0717-33
Bushing, front stabilizer bar to frame.Length: 1.875 inches. Width: .6875 inches. Height: 1.625 inches.
Radius Arm & Axle Pivot Bushing Set
p/n: 20-0779-32
This Radius Arm and Axle Pivot Bushings Set is a quality reproduction of the original factory part(s). This six (6) piece set includes two (2) each C5TZ-3B177-A, two (2) each D9TZ-3B203-A, and two (2) each E6TZ-3B203-A top quality bushings. Fits two-wheel (2WD) drive trucks.
Radius Arm & Axle Pivot Bushing Set
p/n: 20-0776-32
This Radius Arm and Axle Pivot Bushing Set is a quality reproduction of the original factory part(s). This six (6) piece strut rod bushing set includes two (2) each C5TZ-3B177-A, two (2) each C5TZ-3B203-C, and two (2) each C5TZ-3B203-B top quality bushings. Fits two-wheel (2WD) drive trucks.
Radius Arm & Axle Pivot Bushing Set
p/n: 20-0777-32
This Radius Arm and Axle Pivot Bushing Set is a quality reproduction of the original factory part(s). This six (6) piece set includes two (2) each C5TZ-3B177-A, two (2) each D5TZ-3B203-C, and two (2) each D5TZ-3B203-D top quality bushings. Fits two-wheel (2WD) drive trucks.
Radius Arm Bushing Set
p/n: 20-0778-32
This Radius Arm Bushing Set is a quality reproduction of the original factory part(s). This eight piece set includes four (4) each D6TZ-3B203-A Front Axle bushings and four (4) each D8TZ-3B203-A Frame end bushings. Fits four-wheel (4WD) drive trucks.
Radius Arm Bushing Set
p/n: 20-0673-36
This Radius Arm Bushing Set is a quality reproduction of the original factory part(s). This eight (8) piece set includes: Four (4) each D6TZ-3B203-A Front Axle Bushings and Four (4) each C5TZ-3B203-C Frame End Bushings. Fits four-wheel (4WD) drive trucks.
Suspension bushing
p/n: 30-0341-36
Bushing, insulator, upper support arm, outer above steering knuckle support. Four (4) piece set.
Clutch Equalizer Bushing and Seals
p/n: 70-2029-24
This Clutch Equalizer Bushing and Seal set is designed from the original part for superior fitment and operation. The set includes a metal sleeved rubber bushing and two (2) molded rubber seals for each end of equalizer shaft.
Stabilizer Bushing
p/n: 50-0520-34
Bushing, stabilizer bracket. Constructed of durable BUNA rubber. One and five eighths inch (1 5/8") length by one and one half inch (1 1/2") outside diameter by three fourths inch (3/4") inside hole diameter.
Front Stabilizer Bushing
p/n: 30-0123-33
Bushings, front stabilizer mounting bracket. Fully molded rubber.
Stabilizer Bar To Frame Bushing Set
p/n: 20-1844-33
This four (4) piece Stabilizer Bar To Frame Bushing Set mounts on the sway bar to frame. Bushings can crack, dry out, and harden resulting in squeaks.
Stabilizer Bushing
p/n: 27-0085-34
Bushings, for stabilizer bracket. Fully molded rubber. Correct dimensions, not an aftermarket replacement.
Front Stabilizer Bushing
p/n: 30-0298-33
Bushings, front stabilizer rod end. One (1) pair required per car. Fully molded rubber.
Stabilizer Bar Bushing Set
p/n: 20-1717-33
This four (4) piece Stabilizer Bar Bushing set is designed from the original part for superior fitment and function. These are the stabilizer bar to frame mounting bushings.
Leaf Spring to Shackle Bushings
p/n: 70-3344-35
This Leaf Spring To Shackle Bushing set is designed from the original part for superior fitment and function. This bushing installs into the leaf spring eye to fit between the rear shackle to leaf spring. This is a four (4) piece set for both rear leaf springs.
Spring Shackle Bushing Set
p/n: 20-1440-33
This Spring Shackle Bushing Set is for the rear of the rear leaf spring. This set is for two (2) inch leaf springs. Two (2) sets required per car.