Steele Rubber Products grommets, plugs, and bumpers are manufactured from dense rubber. These universal parts are designed to absorb impact, protect electrical, water and fuel lines passing through sharp edges and to seal any hole to prevent against weather and foreign elements.
If you need a style that is not shown here, please call 800-650-6190 or email us at rv@steelerubber.com. We encourage you to share with us images of your old parts to help in this process.
3/4" Gearshift Grommet
p/n: 32-0050-24
This Gearshift Grommet is fully molded and designed from the original part for superior fitment and seal. This grommet is made from high-quality EPDM dense rubber. Designed as an insulator for the gearshift control rod.
3/4" Hood and Door Bumper
p/n: 33-0459-42
This Hood and Door Bumper is fully molded and designed from the original part for superior fitment and seal. Designed for hood to cowl and door hinge pillar upper bumper. May be used in both places.
3/4" Hood Side to Fender Bumper
p/n: 33-0542-42
A quality Hood Side To Fender Bumper. Button type and self-retaining. Replaces factory #391463.
3/4" Multi-Purpose Grommet
p/n: 32-1069-20
This Multi-Purpose Grommet is molded from quality dense rubber to ensure durability. With the generic shape this grommet can be used for a variety of applications.
3/4" Multi-Purpose Grommet
p/n: 32-1062-20
This Multi-Purpose Grommet is molded from quality dense rubber to ensure durability. With the generic shape this grommet can be used for a variety of applications.
3/4" Multi-Purpose Grommet
p/n: 32-1073-20
This Multi-Purpose Grommet is molded from quality dense rubber to ensure durability. With the generic shape this grommet can be used for a variety of applications.
3/4" Parking Brake Grommet
p/n: 32-0537-24
This Parking Brake Grommet is fully molded and designed from the original part for superior fitment and seal. This grommet is made from high-quality EPDM dense rubber. Designed for the parking brake release rod.
3/4" Trunk Floor Pan Plug
p/n: 35-0070-87
This Trunk Floor Pan Plug is fully molded and designed from the original part for superior fitment and seal. This plug is made from high-quality EPDM dense rubber to provide excellent durability.
3/4" Wiper Control Grommet
p/n: 32-0317-52
This Wiper Control Grommet is fully molded and designed from the original part for superior fitment and seal. Designed to run the windshield wiper shaft through the body.
3/8" Inner Fender Bumper
p/n: 33-0512-44
Inner fender to inner splash pan bumper. This bumper is not a generic replacement, and will only be seen when inner fender is removed.
3/8" Multi-Purpose Grommet
p/n: 32-1059-20
This Multi-Purpose Grommet is molded from quality dense rubber to ensure durability. With the generic shape this grommet can be used for a variety of applications.
5/16" Glovebox Door Bumper
p/n: 33-0128-88
This 5/16" Glovebox Door Bumper is designed from the original part for superior fitment, finish and function. This bumper is commonly used as a glovebox door bumper on GM models.
5/16" Standard Stem Bumper - GM
p/n: 33-0127-41
This 5/16" Standard Stem Bumper is designed from the original part for superior fitment, finish and function. This bumper is commonly used as a console and fuel filler door bumper on GM models.
5/8" Firewall Grommet
p/n: 32-0514-20
This Firewall Grommet is fully molded and designed from the original part for superior fitment and seal. Designed for firewall applications such as running the heater vent control cable through the firewall brace.
5/8" Gearshift Bushing
p/n: 32-0051-24
This Gearshift Bushing is fully molded and designed from the original part for superior fitment and seal. This bushing is made from high-quality EPDM dense rubber to provide excellent durability. Designed for the gearshift selector rod.
5/8" Multi-Purpose Grommet
p/n: 32-1065-20
This Multi-Purpose Grommet is molded from quality dense rubber to ensure durability. With the generic shape this grommet can be used for a variety of applications.
5/8" Radiator Panel Bumper
p/n: 33-0211-31
Lower radiator panel to grille bumper. Also used on radiator valance.
5/8" Utility Body Plug
p/n: 35-0458-45
This Utility Body Plug is fully molded and designed from the original part for superior fitment and seal. This plug is made from high-quality EPDM dense rubber to provide excellent durability.
5/8" Wiring Grommet
p/n: 32-0366-53
This Wiring Grommet is fully molded and designed from the original part for superior fitment and seal. Designed to run the windshield wiper control cable or gas gauge wire through the rear compartment pan.
7/16" Hood Vent Bumper
p/n: 33-0042-42
Hood ventilator door bumper, stem retainer. Twelve (12) required per car.
7/16" Multi-Purpose Grommet
p/n: 32-1063-20
This Multi-Purpose Grommet is molded from quality dense rubber to ensure durability. With the generic shape this grommet can be used for a variety of applications.
7/16" Multi-Purpose Grommet
p/n: 32-1060-20
This Multi-Purpose Grommet is molded from quality dense rubber to ensure durability. With the generic shape this grommet can be used for a variety of applications.
7/8" Multi-Purpose Grommet
p/n: 32-1071-20
This Multi-Purpose Grommet is molded from quality dense rubber to ensure durability. With the generic shape this grommet can be used for a variety of applications.
7/8" Multi-Purpose Grommet
p/n: 32-1072-20
This Multi-Purpose Grommet is molded from quality dense rubber to ensure durability. With the generic shape this grommet can be used for a variety of applications.
7/8" Plastic Plug
p/n: 35-1052-20
This Plastic Plug is designed for various uses. Fully molded to ensure proper fit.
7/8" Trunk Bumper
p/n: 33-0990-87
This 7/8" Trunk Bumper is a quality reproduction of the original factory part. Self-retaining bumper is manufactured to OEM specifications to install for an authentic fit, finish, and function.
7/8" Trunk Bumper
p/n: 33-0293-87
This 7/8" Trunk Bumper is a quality reproduction of the original factory part. Self-retaining bumper is manufactured to OEM specifications to install for an authentic fit, finish, and function.
9/16" Frame Grommet
p/n: 32-0414-32
This Frame Grommet is fully molded and designed from the original part for superior fitment and seal. Designed for the Bijur Lubricator delivery tube to run thru the frame at various places.
9/16" Multi-Purpose Grommet
p/n: 32-1067-20
This Multi-Purpose Grommet is molded from quality dense rubber to ensure durability. With the generic shape this grommet can be used for a variety of applications.
9/16" Taillight Bumper
p/n: 33-0556-15
Taillight body upper half and fuel filler cover to lower half bumper.
9/16" Wiring Grommet
p/n: 32-0352-20
This Wiring Grommet is fully molded and designed from the original part for superior fitment and seal. This grommet is made from high-quality EPDM dense rubber. Designed for the parking brake release rod.
Rubber Grommet Assortment Set
p/n: 70-4728-20
A ninety-nine (99) piece Rubber Grommet Assortment Set with popular size coverage in a convenient and economic package. Assortment comes in a convenient, translucent, durable polypropylene box.