Body Parts, Other
Gravel Shield
p/n: 70-0093-45
Rear body deflector apron or valance. Original copy including fastening bolt holes. You locate exhaust hole where needed. Approximately fifty eight (58) inches long.
Sunroof / Glass Top Seal
p/n: 20-3023-45
This Sunroof or Glass Top seal is designed from the original part for superior fitment and seal.
Shaker air cleaner seal
p/n: 20-2766-45
Seal, shaker air cleaner. Includes drain hose and FoMoCo script. Made from Original Ford tooling.
Runningboard edge seal
p/n: 70-0358-45
Seal strip, runningboard to body lower edge, exact copy. Top quality, each strip six (6) foot long.Length: 72.0 inches. Height: .5625 inches.
Runningboard edge seal
p/n: 30-0169-44
Liner, runningboard to body, (side apron to body seal). Set consists of two (2) pieces seven (7) foot long. One (1) inch width is after fold over.
Toe board liner
p/n: 30-0254-20
Liner, toe board, top, with correct beaded edge and shape as originally found.Length: 28-50 inches.
Rumbleseat step pad
p/n: 60-0501-45
Step pad, rumbleseat, on rear fender, with bowtie emblem. Steel core with bolt.Width: 4.375 inches. Height: 5.25 inches.
Body anti-squeak 64 inch strip
p/n: 70-1117-45
Filler, runningboard-to-body, sixty four (64) inch long strip. For forty (40) inch strips see our #70-1116-45.
Rear wheelhouse seal
p/n: 60-0354-45
Seal, rear wheelhouse panel-to-quarter panel, outer. Two (2) five (5) foot strips, one for each side.Length: 60.0 inches. Width: .21875 inches.
Removable top header seal
p/n: 20-0960-45
Seal, removable roof front. Mounts on the front of the shell. Used on fiberglass roof.
Body anti-squeak 40 inch strip
p/n: 70-1116-45
Filler, runningboard-to-body, forty (40) inch long strip. For sixty four (64) inch strips see our #70-1117-45.
Fenderskirt edge seal
p/n: 60-0298-45
Seal, wheel streamliner (fenderskirt) to fender. Two (2) strips each cut five (5) foot long.Length: 60.0 inches. Width: .625 inches.
Cowl to fender seal
p/n: 70-2787-43
Seal, cowl-to-fender. Die cut masticated rubber to authentic original dimensions. Includes all factory holes required for installation.
Body hole plug kit
p/n: 20-2705-20
Plug kit, complete rubber. Includes quarter drain valves and installation instructions. MCA approved. Forty-four (44) piece set.
Rumble Seat Step Pad
p/n: 20-2031-45
This Rumble Seat Step rubber pad is designed from the original part for superior fitment and seal. This step pad fits on the vehicle rear fender to provide a step into the rumble seat.
Body hole plug kit
p/n: 20-2704-20
Plug kit, complete rubber. Includes quarter drain valves and installation instructions. MCA approved. Thirty eight (38) piece set.
Rumbleseat step pad
p/n: 60-0126-45
Pad, rumbleseat step, on rear bumper bracket or fender. Rubber cover only, full slip-over type with bowtie emblem.
Body Hole Plug Kit
p/n: 20-2703-20
Plug kit, complete rubber. Includes quarter drain valves and installation instructions. MCA approved. Thirty-three (33) piece set.
Rumbleseat step mounting pad
p/n: 70-0043-44
Pad, rumbleseat step mounting for fender, double beaded edge per original.Width: 4.375 inches.
Cowl to fender seal
p/n: 70-2794-43
Seals, cowl to fender. Die cut masticated rubber to authentic original dimensions. Includes all factory holes required for installation.
Cowl to fender seal
p/n: 70-2790-43
Seal, cowl-to-fender. Die cut masticated rubber to authentic original dimensions. Includes all factory holes required for installation.
Body Plug / Rubber Grommet Kit
p/n: 20-2702-20
Plug kit, complete rubber. Includes quarter drain valves and installation instructions. MCA approved. Thirty two (32) pieces.
Louver mounting pad
p/n: 20-2857-83
Gaskets, fastback rear window louver mounting. Six (6) piece set.
Cowl to fender seal
p/n: 70-3076-43
Seal, cowl to fender. Two (2) piece set. Die cut masticated rubber.
Hydraulic window lift grommet
p/n: 70-0642-21
Grommet, window lift hydraulic line through floor panel. Single hole type (for two (2) hole type, see our #70-0643-21).Length: 1.5 inches. Width: 1.
Hydraulic window lift grommet
p/n: 70-0643-21
Grommet, window lift hydraulic lines through floor panel, 2-hole style (for cars requiring single-hole style, see our #70-0642-21).Length: 1.5 inches.
Body hole plug kit
p/n: 20-2706-20
Plug kit, complete rubber. Does NOT include quarter drain valves. Includes installation instructions. MCA approved. Thirteen (13) piece set.
Exterior body paint kit
p/n: 82-0027-44
Gasket set, exterior body repaint. Set includes door handle gaskets, lock cylinder gaskets, taillight gaskets, and side turn signal gaskets.