Running Board Matting
Running Board Matting
p/n: 70-0420-49
Running board matting. Fully molded rubber strips with full length steel cores molded in.
Running Board Matting
p/n: 30-0449-49
This Running Board Matting is designed from the original part for superior fitment and a factory like appearance. Made from short wheel-base matting with extension pieces to make the full length cover.
Running Board Matting
p/n: 40-0212-49
This Running Board Matting is designed from the original part for superior fitment and a factory like appearance. This four (4) piece set consists of one (1) pair of our #40-0151-49 mats plus two (2) extension pieces to give correct fit for the longer Model CT model running boards.
Running Board Trim Strips
p/n: 30-0450-49
This Running Board Trim Strip set is designed from the original part for superior fitment and a factory like appearance. Trim strips are made from high quality stainless steel and this set includes retaining clips (not sold separately). For 148" Wheel Base models.
Running Board Matting
p/n: 40-0151-49
This Running Board Matting is designed from the original part for superior fitment and a factory like appearance. Fully molded with all original details including underside clearance for embossed running board for a perfect fit.
Running Board Matting
p/n: 30-0428-49
Running board matting. Fully molded with crowned blocks. Top quality rubber, flawless detail. No splicing or butting required.
Running Board Matting
p/n: 40-0260-49
Running board Matting. Fully molded with all original details. No splicing required. Metal backing or metal trim not included.
Running Board Matting
p/n: 40-0293-49
Running board Matting. Fully molded with all original details. Includes integral flaps of rubber on 3 sides to cushion fenders and splash apron. No splicing or butting required.
Running Board Matting
p/n: 30-0214-49
Running board matting. Fully molded right and left hand. Top quality rubber, flawless detail. Includes rubber cross molding for in front of rear fender.
Running Board Matting
p/n: 50-0146-49
Matting, running board, original pattern with material to come down over ends and sides.
Running Board Matting
p/n: 30-0218-49
Running board matting for Model 115C only. Made from the molded running board matting for the 120's (our #30-0214-49).
Running Board Matting
p/n: 40-0292-49
Running board Matting. Fully molded with all original details. Includes integral flaps of rubber on 3 sides to cushion fenders and splash apron.
Running Board Matting
p/n: 40-0150-49
Running board matting. Fully molded, fine detail. Incorporates embossed underside to fit metal bead around edge of original running board steel.
Running Board Matting
p/n: 11-0003-49
Edge panel, running board. Exact copy including 1/4 inch mounting studs. A perfect replica in highest quality material. 43-1/2 inch long.
Door opening step pad
p/n: 40-0541-49
Mats, door sill opening, on body. Clip type. For stud-type see our #40-0542-49) mat includes retaining grommets (40-0125-49).
Door opening step pad
p/n: 40-0542-49
Mats, door sill opening, on body. Stud type, includes retaining grommets (#40-0125-49). For clip type see our #40-0541-49.
Running Board Covers
p/n: 20-2200-49
This Running Board Cover matting is designed from the original part for superior fitment and seal. This cover pair is pre-molded and manufactured from top quality rubber.
Door opening step pad
p/n: 40-0389-49
Mats, door sill opening, on body. Made without metal core (copied from authentic rubber only original). Molded-in carrot retainers.
Door opening step pad
p/n: 60-0418-45
Mats, door opening step, with metal backing as original. Two (2) piece set.2 piece set for 2 door Fleetline Aerosedan, Style 1007 ONLY.
Door opening step pad
p/n: 70-2623-49
Mat, door opening, on body. Rear doors. For front doors see our #70-2622-49. Excellent craftsmanship with authentic metal core with studs like original.
Door opening step pad
p/n: 70-2622-49
Mat, door opening, on body. Front doors. For rear doors see our #70-2623-49. Excellent craftsmanship with authentic metal core with studs like original.
Door Opening Threshold Pad
p/n: 70-2517-49
Mat pair for door sill threshold opening, on body. Made with authentic appearance and constructed of long lasting rubber like original. Perfect replica of factory #1433321, however it should work fine as a replacement of #1497247, 1433281, and 1803065.
Door opening step pad
p/n: 60-0409-45
Mats, door opening step, rubber with metal backings as original.Length: 41.0 inches.
Door opening step pad
p/n: 70-1118-45
Mats, front door opening, with metal backing, proper body contour and attaching holes. Two (2) piece set for both front doors.Length: 30.375 inches.
Door opening step pad
p/n: 70-1119-45
Mats, rear door opening, with metal backing, proper body contour and attaching holes. Two (2) piece set for both rear doors.Length: 21.875 inches.
Door opening step pad
p/n: 70-0594-49
Matting, cover panel extension, fender to door, front, right and left, with brass core, as original.
Door opening step pad
p/n: 70-0593-49
Matting, cover panel extension, fender to door, rear, right and left, with brass core as original.
Rumbleseat step pad
p/n: 40-0412-44
Step pad, rumbleseat upper, with "P" logo. Fully molded with core and mounting stud.Height: .625 inches.
Running Board Center Strip
p/n: 30-0034-49
Running board center strip. Fits original metal retainer. Authentic reproduction with correct detail.
Running Board Door Opening Step Pads
p/n: 30-0216-49
This Running Board Door Opening Step Pad pair is designed from the original part for superior fitment and seal. Provides a perfect copy of the original accessory.
Rumbleseat step pad
p/n: 25-0018-44
Step, rumbleseat fender with molded-in studs.Length: 6.375 inches.
Rumbleseat step pad
p/n: 11-0012-87
Cover, rumbleseat step pad, slipover type, excellent copy.Width: 5.0 inches. Height: 5.0 inches.
Rumbleseat step pad
p/n: 40-0413-44
Step pad, rumbleseat, upper, with Chrysler medallion logo. Fully molded with core and mounting stud.Height: .625 inches.
Running Board Edge Seal
p/n: 70-0358-45
Seal strip, running board to body lower edge, exact copy. Top quality, each strip six (6) foot long. Length: 72.0 inches. Height: .5625 inches.
Running Board Edge Seal
p/n: 30-0169-44
Liner, running board to body, (side apron to body seal). Set consists of two (2) pieces seven (7) foot long. One (1) inch width is after fold over.
Rumbleseat step pad
p/n: 40-0124-44
Pad, rumbleseat step, with "Dodge" logo, slip over type to fit old steel core. Perfect detail and lettering.Height: .50 inches.
LaSalle Monogram
p/n: 70-0056-49
LaSalle monograms for center of running board matting, exact copy, to be in-laid.
Rumbleseat step pad
p/n: 60-0501-45
Step pad, rumbleseat, on rear fender, with bowtie emblem. Steel core with bolt.Width: 4.375 inches. Height: 5.25 inches.
Rumbleseat step pad
p/n: 40-0012-44
Pad, rumbleseat step bears Chrysler medallion logo in center.Height: .50 inches.
Rumbleseat step pad
p/n: 40-0353-44
Pad, rumbleseat step, with "DS" logo. Fits old bracket and bezel. See our #40-0055-44 also.Height: .50 inches.
Rumbleseat step pad
p/n: 40-0209-44
Pad, rumbleseat step slip over style for original core, "DB" logo.
Rumbleseat step pad
p/n: 40-0055-44
Pad, rumbleseat step, with "DeSoto" logo, full slipover type to fit old carcass and outer trim ring. See also our #40-0353-44.Height: .50 inches.
Running Board to Body Seal
p/n: 70-1116-45
This Running Board to Body Seal is extruded from dense rubber for a durable and proper seal. Sold as a forty (40) inch pair.
Fenderskirt edge seal
p/n: 60-0298-45
Seal, wheel streamliner (fenderskirt) to fender. Two (2) strips each cut five (5) foot long.Length: 60.0 inches. Width: .625 inches.