Cowl Vent Fittings
This Cowl Drain pair is designed from the original part for superior fitment and function. These quality reproduction drains replace aged, fatigued and damaged originals.
Gutter, cowl side drain, left and right. Rubber with metal core as original. Eleven (11") inches long.Length: 11.0 inches.
Gasket, cowl vent. Die cut from original factory drawing.Length: 20.0 inches.
Gasket, cowl vent. Molded labyrinth style as original.Length: 13.50 inches.
Gasket, cowl side ventilator. One eighth (1/8) inch sponge rubber.Length: 11.375 inches. Width: 4.625 inches.
Gasket, cowl vent.Length: 17.25 inches.
Seal, fresh air adaptor door. Part of assembly #903964. For vehicles with accessory air control systems.
Weatherstrip, cowl vent. Top quality sponge rubber.
This Cowl Vent Gasket is manufactured from high quality EPDM sponge rubber. For twin cowl vents of thirty four (34") inch circumference.
Gasket, cowl vent. Perfect reproduction, high quality, original configuration, not a sponge substitute.Length: 14.0 inches. Width: 5.75 inches.
Gasket, cowl vent. Fully molded to original cross-section and outline.Length: 18.0 inches.
This Cowl Vent Gasket is designed from the original part for superior fitment and seal. Installs for a like factory fit and finish.
Gasket, cowl vent. Original solid rubber configuration, not a sponge substitute.
Gasket, cowl vent. Die cut sponge with smooth curves. Excellent reproduction designed to fit in gutter and not bind when closing.Length: 15.75 inches.
Gasket, top cowl vent. Closed cell sponge rubber. One half (1/2) inch by three fourths (3/4) inch. Rectangular cross section.
Weatherstrip, cowl vent. Labyrinth type as original.
Gasket, cowl vent, original labyrinth type, not sponge.Length: 14.75 inches. Width: 5.50 inches.
Gasket, cowl vent. Labyrinth style as original.Length: 12.75 inches.
Gasket, cowl vent.
Gasket stock, cowl vent, high grade sponge of proper cross-section, (not molded into ring), approximately forty eight (48) inch strip per car.
Weatherstrip, cowl ventilator cover.Length: 15.50 inches.
Gasket, cowl vent, molded sponge rubber to original size and configuration.
Weatherstrip, cowl vent. Original solid rubber configuration, not a sponge substitute. A top quality part for your classic vehicle restoration.
Gasket, cowl vent.Length: 16.25 inches. Width: 2.75 inches.
Hose, cowl vent gutter drain.Length: 7.0 inches.
Gasket, cowl vent.
Gasket, cowl vent, quality sponge, five sixteenths (5/16) inch by one half (1/2) inch cross section, forty five (45) inch developed length.
Gasket, cowl vent. Top quality sponge of correct section, cut to sufficient length for circumference of vent cover.
Gasket, cowl vent. Sponge rubber, good copy of original. Thirty seven and one half (37-1/2) inch developed length.Length: 37.50 inches.
Hose, cowl vent drain. Seems to be correct for some models rather than our #50-0259-54.
Gasket, cowl vent. Die cut sponge rubber to original dimensions.Length: 19.0 inches.
Weatherstrip, cowl vent lid (top), sponge lip type, for five (5) inches by eighteen (18) inches cowl vent.Width: 18.0 inches. Height: 5.0 inches.
Gasket, cowl vent. Sponge rubber. For cowl vents of thirty-four (34) inch circumference, three fourths (3/4") inch width as shown.
Gasket, cowl vent. Labyrinth type as original.Length: 16.75 inches.
Knob, cowl vent opening handle.Length: 2.5625 inches.
Gasket, cowl vent. Perfect copy of original, not a sponge substitute, top quality material.
Gasket, cowl vent. Original labyrinth style, not sponge.Length: 16.5 inches. Width: 4.0 inches.
Gasket, cowl vent. These parts are made of the highest quality and authenticity.Length: 15.0 inches.
Tube, windshield cowl drain.
Gasket, cowl vent cover.Width: 18.25 inches. Height: 4.0 inches.
Gasket, cowl vent, lip type. Sponge rubber, for three and seven eighths (3-7/8) inch by fifteen (15) inch cowl vent.Length: 15.0 inches. Width: 3.
Gasket, cowl vent.
Gasket, cowl vent. One fourth (1/4) inch by five sixteenths (5/16) inch, for five (5) inch by fifteen (15) inch top cowl vent. Sponge type.Width: 15.
Seal, cowl side ventilator door. Two (2) required per car.
Gasket, cowl vent. One (1) piece sponge rubber shear die cut to correct dimensions. Replaces #4034247-8.
Grommet, cowl vent drain pipe.Length: 1.875 inches. Width: 1.5625 inches.
This two (2) piece Cowl To Fender Seal pair is designed from the original part for superior fitment and seal. Fender seals are die cut from quality masticated rubber to authentic original dimensions.
Grommet, cowl drain. One and seven sixteenths (1-7/16) inch outside diameter for seven sixteenths (7/16) inch drain hose through firewall.
Hose, cowl vent drain.Length: 7.25 inches.
Weatherstrip, cowl grill to firewall. Used on either end of cowl near fender. Die cut dense sponge rubber.