Radiator
Fluted radiator hose
p/n: 70-0603-31
Hose, cylinder head to radiator, upper. Fluted as original.Length: 10.125 inches.
Fluted radiator hose
p/n: 30-0258-31
Hose, radiator, upper. Fluted outside diameter just like original.
Radiator mounting pad kit
p/n: 20-0772-31
Pad kit, radiator support to frame. Fits 1973-76 F100 2-wheel drive, but will work for F250 through F350 but must add extra metal washers.
Radiator mounting pad
p/n: 30-0121-31
Grommet, radiator cradle to frame tie rod. 1st type, with locating boss. One four (4) piece set required per car. See also our #30-0309-31.
Radiator mounting pad
p/n: 70-2238-31
Radiator support pad, insulator. Four (4) piece set for use on all 4 corners of radiator. For vehicles with 3 wide core radiators.
Radiator brace filler strip
p/n: 70-0020-31
Filler strip, radiator brace rods. Retains ignition wire and thermometer tube in hollow brace rods. Thirty (30) inch strips.
Radiator support weatherstrip
p/n: 70-2780-45
Seal, radiator support kit. Die cut masticated rubber to authentic original dimensions. Includes all factory style holes required for installation.
Front bumper seal filler
p/n: 70-2777-45
Filler, front bumper to radiator seal. Die cut masticated rubber to authentic original dimensions. Includes all factory style holes required for installation.
Front bumper seal filler
p/n: 70-2503-45
Filler, front bumper to radiator seal. Die cut masticated rubber to authentic original dimensions. Includes all factory style holes required for installation.
Radiator mounting pad kit
p/n: 20-0642-31
Kit, radiator support to frame pad and bolt. Sixteen (16) piece set.
Front bumper seal filler
p/n: 70-2505-45
Filler, front bumper to radiator seal. Die cut masticated rubber to authentic original dimensions. Includes all factory style holes required for installation.
Radiator mounting pad
p/n: 30-0208-31
Pad, radiator lower splasher to grille. Fastens into place with rivets. One four (4) piece set required per car.Length: .875 inches. Width: .875 inches.
Radiator mounting pad
p/n: 30-0395-31
Spacer or Pad, radiator anchorage stud, upper stud. One (1) pair required per car.Length: 2.5625 inches.
Radiator mounting pad
p/n: 30-0209-31
Shim, radiator core mounting stud spacer. Fully molded rubber. Use as required. Comes as a pair of two (2). Two and seven eighths inch (2 7/8") square by five eighths inch (5/8") inside hole diameter by three eighths inch (3/8") height.
Radiator Support To Bumper Filler
p/n: 70-2785-45
This four (4) piece radiator support to bumper filler set is designed from the original parts for superior fitment and seal. Die cut masticated rubber to authentic original dimensions.
Radiator shroud seal
p/n: 20-0126-31
Seal, bottom of radiator to frame air deflector. Includes special plastic buttons to install.
Radiator bracket cushion
p/n: 70-2050-31
Radiator support bracket, insulator, large type. See our #70-2070-31 for small type.
Radiator bracket cushion
p/n: 70-2070-31
Radiator support bracket, insulator, small type. See our #70-2050-31 for large type.Length: 4.5 inches.
Radiator mounting pad kit
p/n: 20-0535-45
Kit, radiator support to frame pad. Eighteen (18) piece set. Includes: two (2) center pads, two (2) outer support pads, six (6) washers, four (4) bolts, and four (4) nuts.
Radiator mounting pad kit
p/n: 20-0570-45
Kit, radiator support to frame pad. Includes: two (2) center pads, two (2) outer support pads, bolts, nuts, lock washers.
Fan shroud assembly seal
p/n: 70-2779-45
Seal, fan shroud assembly. Die cut masticated rubber to authentic original dimensions. Includes all factory style holes required for installation.
Radiator mounting pad
p/n: 30-0451-31
Spacer or Pad, lower radiator anchor stud. Used in conjunction with our #30-0395-31.Height: .3125 inches.
Radiator support weatherstrip
p/n: 70-2502-45
Filler, radiator to support seal. Die cut masticated rubber to authentic original dimensions. Includes all factory style holes required for installation.
Radiator Top Seal
p/n: 70-2784-45
This Radiator Top Seal is die cut masticated rubber made to authentic original dimensions. Upper Radiator filler with the factory style holes required for installation.
Splash apron
p/n: 20-0076-31
Set, radiator support to frame rubber splash shield. Four (4) piece set.
Radiator support filler
p/n: 70-3087-31
Filler, radiator support. Die cut masticated rubber. Three (3) piece set.
Radiator mounting pad
p/n: 70-2709-31
Support, lower radiator. See our #70-2712-31 for upper support cushion.
Radiator mounting pad
p/n: 70-2712-31
Support, upper radiator. See our #70-2709-31 for lower support cushion.
Radiator mounting pad
p/n: 50-0529-31
Pad, radiator body mounting. Made with molded-in metal washer like original.Height: .75 inches.
Radiator baffle seals
p/n: 70-3767-31
Seals, radiator baffle. Right and left. Die cut masticated rubber to authentic original dimensions.
Radiator mounting pad kit
p/n: 20-0641-31
Kit, radiator support to frame pad and bolt. Six (6) piece set.
Radiator mounting pad
p/n: 70-0963-31
Radiator mounting pad, insulator. Up to four (4) used per car.Length: 6.0 inches.
Radiator bracket cushion
p/n: 70-2015-31
Insulator, radiator support cushion, upper or lower. Fully molded with retaining carrots.
Radiator bracket cushion
p/n: 70-2014-31
Radiator support bracket, insulator, upper. Two (2) used per car.Length: 6.0 inches.
Radiator mounting pad
p/n: 25-0087-31
Insulator, radiator support. Two (2) to four (4) used per car.Length: 6.75 inches.
Air Deflector - At Radiator Core Support
p/n: 20-0193-31
This Air Deflector piece is designed from the original part for superior fitment and seal. Piece is die cut from quality masticated rubber to authentic original dimensions. This piece fits at the bottom of radiator core support to frame. Used on V8 models.
Radiator top seal
p/n: 20-0181-31
Seal, top of radiator support to hood air deflector. Fifty (50) inches long. For the following engines: 240, 289, 352, 390, 427, or 428.
Radiator top seal
p/n: 20-0194-31
Seal, radiator support to bottom of radiator. "L" shaped. Twenty six and three eighths (26-3/8) inches long.
