Bumper Guard Cap
p/n: 70-0630-30
Bumper "bullets" (caps on bumper guard). Rubber with molded in plate and bolt. High quality reproduction. Four and three eighths inch (4-3/8") outside diameter.
Bumper guard cap
p/n: 70-0883-30
Caps, front bumper guard. Rubber with molded in plate and bolt. A high quality reproduction. Four and seven eighths inch (4-7/8") outside diameter.
Bumper seal
p/n: 70-2667-45
Filler, fender to bumper end. Seal fits between front of the front fender and back of the front bumper.
Bumper Guard Cap
p/n: 60-0345-30
This Bumper Guard Cap pair, often referred to as bumper bullets, is a reproduction designed from the original for an exact part. Fully molded EPDM dense rubber with molded in bolt for durability.
Front bumper grommet
p/n: 17-0013-28
Grommet, front bumper. Fully molded rubber. Excellent quality and craftsmanship. Four and three sixteenths inch (4-3/16") outside diameter by two and three sixteenths inch (2-3/16") inside hole diameter by one and one fourth inch (1-1/4") height.
Front bumper grommet
p/n: 40-0057-30
Grommets, front bumper. Fully molded rubber, inside hole slightly rectangular. Four and one half inche (4-1/2") length by three and three eighths inch (3-3/8") width by one and three eighths inch (1-3/8") inside hole length by one and one fourth inch (1-1
Front bumper grommet
p/n: 27-0008-28
Grommet, front bumper. Hollow construction, with retaining flange as original, fully detailed copy. Fully molded rubber. Four and nine sixteenths inch (4-9/16") outside length by two and one half inch (2-1/2") outside width by one and five eighths inch (1
Bumper grommet
p/n: 40-0047-30
Grommets, front or rear bumpers, right and left. Two (2) pair used per car if needing both front and rear bumper grommets. Fully molded rubber. Four and one fourths inch (4-1/4") outside length by three inches (3") outside width by one and five eighths inch (1-5/8") inside hole length by one half inch (1/2") inside hole width
Bumper grommet
p/n: 40-0048-30
Grommets, bumper. Some front and some rear, right and left. Fully molded rubber. Three and thirteen sixteenths inch (3-13/16") outside length by three and one fourth inch (3-1/4") outside width by one and three fourths (1-3/4") inside hole length by seven
Front bumper grommet
p/n: 30-0136-28
Grommets, front bumper support bar to body. Fully molded rubber. Four and five eighths inch (4-5/8") outside length by two and five eighths inch (2-5/8") outside width by one and five sixteenths inch (1-5/16") inside hole length by one and five sixteenths
Front bumper grommet
p/n: 70-0041-28
Grommets, front bumper. Hollow construction, fully duplicates original.
Front bumper grommet
p/n: 27-0001-28
Grommet, front bumper. Hollow construction as original, with retaining flange. Fully molded rubber. Five and one sixteenths inch (5-1/16") outside length by two and three eighths inch (2-3/8") outside width by one and eleven sixteenths inch (1-11/16") ins
Front bumper grommet
p/n: 30-0001-28
Grommet, front bumper. Molded right and left with hollow construction as found on original.Length: 4.0 inches. Width: 2.25 inches.
Front bumper grommet
p/n: 30-0171-28
Grommets, front bumper. Molded right and left with correct detail as originally found. Fully molded rubber. Four inches (4") outside length by three inches (3") outside width by one and nine sixteenths inch (1-9/16") inside hole length by one half inch (1
Front bumper grommet
p/n: 70-0103-28
Grommets, front bumper. Theses are for the round, tubular bumper support.
Front bumper grommet
p/n: 40-0077-30
Grommet, front bumper. Hollow construction for good fit as original.Length: 3.5625 inches.
Front Fender to Bumper Fillers
p/n: 20-2714-28
These Front Fender to Bumper Fillers are designed from originals so it fits correctly.
Front bumper grommet
p/n: 30-0077-28
Grommets, front bumper. Molded right and left, including retaining flange. Fully molded rubber. Three and fifteen sixteenths inch (3-15/16") outside length by two and five eighths inch (2-5/8") outside width by one and one half inch (1-1/2") inside hole l
Front bumper grommet
p/n: 70-0291-28
Grommets, front bumper arm. Hollow construction for good fit. Fully molded rubber. Four and seven eighths inch (4-7/8") outside length by two and five eighths inch (2-5/8") outside width by one and five eighths inch (1-5/8") inside hole length by nine six
Front bumper grommet
p/n: 30-0071-28
Grommets, front bumper. Proper hollow construction as original for good fit. Fully molded rubber. Five and one eighths inch (5-1/8") outside length by two and three eighths inch (2-3/8") outside width by one and five eighths inch (1-5/8") inside hole leng
Bumper grommet
p/n: 70-0102-28
Grommets, bumper arm. Fully molded rubber. Five inches (5") outside length by three and one sixteenths inch (3-1/16") outside width by one and five eighths inch (1-5/8") inside hole length by one half inch (1/2") inside width by one and one half inch (1-1
Front bumper grommet
p/n: 40-0122-30
Grommets, front bumper. Hollow construction for good fit. Fully molded rubber. Four and five eighths inch (4-5/8") outside length by three and one fourth inch (3-1/4") outside width by one and one half inch (1-1/2") inside hole length by one half inch (1/
Front bumper grommet
p/n: 18-0019-28
Grommets, front bumper. Fully molded rubber. Three and one fourth inch (3-1/4") outside length by three and one eighth inch (3-1/8") outside width by one and one half inch (1-1/2") inside hole length by one half inch (1/2") inside hole width by one and on
Front bumper grommet
p/n: 50-0056-28
Grommets, front bumper. Fully molded rubber. Four and seven eighths inch (4-7/8") outside length by two and seven eighths inch (2-7/8") outside width by one and fifteen sixteenths (1-15/16") inside hole length by nine sixteenths inch (9/16") inside hole w
Front bumper grommet
p/n: 27-0004-28
Grommet, front or rear bumper. Hollow construction, perfect fit. Note: In 1935 this grommer is used on the front bumper. In 1937-1938: this bumper is used on the rear bumper
Front bumper grommet
p/n: 60-0257-28
Grommet, front bumper, right and left. Fully molded rubber. Four inches (4") length by three inches (3") width by one and five eighths inch (1-5/8") inside hole length by five eighths inch (5/8") inside hole width by one and five eighths inch (1-5/8') hei
Front bumper grommet
p/n: 50-0154-28
Grommets, front bumper. Fully molded rubber. Five and three fourths inch (5-3/4") outside length by two and thirteen sixteenths inch (2-13/16") outside width by two and five sixteenths inch (2-5/16") inside hole length by five eighths inch (5/8") inside h
Bumper grommet
p/n: 10-0167-28
Grommets, front and rear bumper arm. Fully molded rubber, slightly angular. Two and seven eighths inch (2-7/8") outside length by two and three fourths inch (2-3/4") outside width by one and three eighths inch (1-3/8') inside hole diameter by one inch (1"
Front bumper grommet
p/n: 40-0301-30
Grommets, front bumper. Fully molded rubber. Four inches (4") outside length by one and five sixteenths inch (1-15/16") outside width by one and five eighths inch (1-5/8") inside hole length by one half inch (1/2") inside hole width by one and three eight
Front bumper grommet
p/n: 60-0080-28
Grommets, front bumper, right and left. Hollow construction as original. Fully molded rubber. Three and five sixteenths inch (3-5/16") outside length by two and thirteen sixteenths inch (2-13/16") outside width by one and five eighths inch (1-5/8") inside
Bumper grommet
p/n: 30-0039-28
Grommets, front or rear bumper. On models without trunk racks. Two (2) pair used per car if needing both front and rear bumper grommets. Three and five eighths inch (3-5/8") outside length by two and one fourth inch (2-1/4") outside width by one and five eighths
Front bumper grommet
p/n: 27-0054-28
Grommet, front bumper. Fully molded rubber, detailed and flanged as original. Four and one fourth inch (4-1/4") outside length by two and seven sixteenths inch (2-7/16") outside width. One and three fourths inch (1-3/4") inside hole length by nine sixteen
Front bumper grommet
p/n: 60-0321-28
Grommet, front bumper. Fully molded rubber. For vehicles with knee action. Three and one half inches (3-1/2") outside length by two and seven eighths inch (2-7/8") outside width. One and one half inch (1-1/2") inside hole length by one half inch (1/2") in
Front bumper grommet
p/n: 40-0216-30
Grommets, front bumper. Fully molded rubber. Three and thirteen sixteenths inch (3-13/16") outside length by two and one fourth inch (2-1/4") outside width by one and eleven sixteenths inch (1-11/16") inside hole length by one half inch (1/2") inside hole
Front bumper grommet
p/n: 40-0195-30
Grommet, front bumper. Three and one half inch (3-1/2") inch diameter by one and three fourths inch (1-3/4") inside hole diameter by five eighths inch (5/8") height.
Front bumper grommet
p/n: 60-0045-28
Grommet, front bumper. Fully molded rubber. Five and one fourths inch (5-1/4") outside length by two and one eighths inch (2-1/8") outside width by one and five eighths inch (1-5/8") inside hole length by seven sixteenths inch (7/16") inside hole width by
Front Bumper to Body Filler
p/n: 70-2641-30
This two (2) piece Front Bumper to Body Filler is used at the outer corners. The pair is fully molded with excellent detail and construction.
Front bumper grommet
p/n: 27-0018-28
Grommet, front bumper. Fully detailed and flanged as original. Fully molded rubber. Three and three fourths inch (3-3/4") outside length by two and three sixteenths inch (2-3/16") outside width by one and nine sixteenths inch (1-9/16") inside hole length
Front bumper grommet
p/n: 25-0010-28
Grommet, front bumper, right and left. Hollow back, original copy.Length: 4.0625 inches.
Front bumper grommet
p/n: 60-0142-28
Grommets, front bumper, right and left, hollow back. Fully molded rubber. Three and seven sixteenths inch (3-7/16") outside length by two and nine sixteenths inch (2-9/16") outside width by one and five eighths inch (1-5/8") inside hole length by seven si
Front bumper grommet
p/n: 50-0041-28
Grommets, front bumper, right and left. Fully molded rubber. Four and three fourths inch (4-3/4") outside length by three inches (3") outside width by one and five eighths inch (1-5/8") inside hole length by one half inch (1/2") inside hole width by one a
Front bumper grommet
p/n: 50-0043-28
Grommets, front bumper. Fully molded rubber. Five and three fourths inch (5-3/4") outside length by two and thirteen sixteenths inch (2-13/16") outside width by one and eleven sixteenths inch (1-11/16") inside hole length by nine sixteenths inch (9/16") i