Convertible Parts, Other
Detachable center post pad
p/n: 70-0273-67
Pads, upper and lower for removable center post, brass carcass as original. Four (4) piece set.Length: 3.125 inches.
Detachable center post pad
p/n: 30-0261-67
Pad set, detachable center post, folding top upper and lower, right and left. Steel cores as original. 4 piece set.Width: 3.0 inches. Height: 2.75 inches.
Detachable center post pad
p/n: 70-0206-67
Bumpers, convertible top detachable pillar, upper and lower, right and left. With metal core per original, four (4) piece set.
Detachable center post pad
p/n: 70-0295-67
Pads, detachable center post, upper and lower, steel core. One and nine sixteenths (1-9/16) inches by four and one fourth (4-1/4) inches. Four (4) piece set.
Detachable center post pad
p/n: 70-0445-66
Pads, detachable center post, upper and lower, right and left, brass core, four (4) piece set.Length: 4.375 inches. Width: 1.625 inches.
Detachable center post pad
p/n: 70-0248-67
Pads, center body removable pillar, Brass core, four (4) piece set.
Detachable Center Post Pad
p/n: 50-0119-67
Pad, detachable center post, top and bottom. Brass core, four (4) piece set.
Rear Roof Side Rail Pads
p/n: 70-3666-67
This Rear Roof Side Rail Pad weatherstrip pair is designed from the original parts for superior fitment and seal. This seal pair installs directly to the convertible top at the rear to seal between the convertible roof and the top of the vehicle quarter panel.
Quarter window filler
p/n: 70-2048-67
Filler, quarter window weatherstrip, rear on inner panel. Hard to see part found at bottom of rear side window. Fully molded with metal core.Width: 2.
Detachable center post pad
p/n: 30-0191-67
Pads, for removable posts, upper and lower. Set of four (4).Length: 2.125 inches. Width: 1.75 inches.
Retractable roof weatherstrip
p/n: 20-1933-67
Weatherstripping, front roof side assembly. Cloth covered like original. Installs on side of flapper.
Convertible top rest block
p/n: 70-0069-67
Pads, convertible top rest for rear deck. Two heights as original for inner and outer positions. Four (4) piece set.Length: 2.0625 inches.
Detachable center post pad
p/n: 30-0287-67
Pads, convertible top folding pillar (top main bow hinge), right and left, with brass core.Width: 2.75 inches.
Detachable center post pad
p/n: 30-0286-67
Pads, lower, top removable center pillar, right and left. Brass core.Width: 3.375 inches. Height: 2.75 inches.
Retractable Roof Front Side Weatherstrip
p/n: 20-1925-67
Weatherstripping, front roof side assembly. Cloth covered like original. Goes on side of flapper.
Roof Flap Bow Weatherstrip
p/n: 20-1924-67
This Roof Flap Bow Weatherstrip is designed from the original part for superior fitment and sealing. For the top to front of top flapper weatherstrip. This is the main seal, second from front for the roof.
Convertible post bumper
p/n: 14-0021-67
Pad, convertible top folding post bottom, brass core as original, earlier type, perfect reproduction.Width: 2.0 inches. Height: 3.25 inches.
Convertible post bumper
p/n: 14-0019-67
Pad, convertible top folding post bottom, Brass core as original. Later type, perfect reproduction.Width: 3.75 inches. Height: 2.0 inches.
Quarter window filler
p/n: 70-2518-67
Filler, quarter window weatherstrip, rear on inner panel. Fully molded with metal core.
Detachable center post pad
p/n: 30-0108-67
Pads, detachable center post, bottom. Seven eighths (7/8) inch by one and one fourth (1-1/4) inch by two (2) inch. Length: 2.0 inches. Width: 1.25 inches.
Convertible top arm pad
p/n: 30-0440-67
Pad, convertible top to windshield post. Molded left and right hand with metal core just like originalWidth: 2.125 inches. Height: 3.0 inches.
Side Roof Rail Weatherstrip
p/n: 14-0038-67
Seal, quarter post to folding top, good copy of original. Four (4) piece set. Length: 11.625 inches.
Detachable center post pad
p/n: 30-0423-67
Pad, convertible top right and left latches.Width: 3.0 inches. Height: 2.50 inches.
Quarter window filler
p/n: 70-3433-67
Weatherstrip, quarter window filler on rear inner panel. Original appearance, constructed with a brass core for longevity. Pair includes filler for both sides of vehicle.
Detachable center post pad
p/n: 20-2227-66
Pads, center pillar post. Two (2) upper and two (2) lower in set.
Detachable center post pad
p/n: 20-2226-66
Pads, center pillar post. Two (2) upper and two (2) lower in set.
Convertible top arm cover
p/n: 70-0736-67
Cap, folding pillar to side roof rail link. Perfect copy in original grey rubber. Four (4) piece set.Length: 1.75 inches.
Upper Rear Deck Lid Corner Seals
p/n: 70-4145-87
This Upper Rear Deck Lid Corner Seal pair is designed from the original parts for superior fitment and seal. These seals mount directly to the body on the right side and left side at each corner to seal against the upper rear deck lid.
Rear Quarter Window Filler
p/n: 70-3505-67
This Rear Quarter Window Filler pair is designed from the original part for superior fitment and seal. This is the rear quarter window folding top cover retainer guide with strip. Fully molded with a brass metal core and includes hardware.
Convertible top arm pad
p/n: 30-0065-67
Pads, folding top swinging arms, right and left, dovetail cross section.Length: 3.50 inches. Width: 1.6875 inches.
Roof rail filler
p/n: 70-0396-67
Fillers, side roof rail to front roof rail at front corner, right and left. Metal core, threaded for original screws.
Convertible top arm pad
p/n: 30-0441-67
Pad, convertible top to lock pillar. Molded left and right hand with metal core just like original.Width: 1.875 inches. Height: 1.625 inches.
Package Tray Panel To Quarter Panel Seals
p/n: 70-4210-85
This Package Tray Panel To Quarter Panel Seal pair is designed from the original part for superior fitment and seal. This left (LH) and right (RH) seal pair fits between vehicle body quarter panel and rear package tray. This part is for the Convertible model only.
Convertible post bumper
p/n: 50-0208-67
Bumper, on folding top female hinge, for folding post, when top is retracted, right and left, brass core as original.Length: 1.8125 inches. Width: 1.
Convertible post bumper
p/n: 70-0386-67
Pads, folding post bottom, fully molded with brass core. Three sixteenths (3/16) inch by one (1) inch by two and one half (2-1/2) inches.
Convertible Quarter Window Filler
p/n: 70-2269-67
This convertible top Quarter Window Filler is designed from the original part for superior fitment and sealing. A hard to see part found at the bottom rear of the side window when the window is rolled up.
Detachable center post pad
p/n: 70-0279-67
Pads, for bottom of folding post or body, brass core as original, screw held.Length: 1.875 inches. Width: 1.0625 inches.
Convertible top arm pad
p/n: 60-0455-67
Pad, convertible top folding post, fastens on lower end with two (2) screws. Metal core.Length: 1.3125 inches. Width: 1.25 inches.
Convertible top rest block
p/n: 60-0698-67
Pad, convertible top rest. Fully molded with metal core replacement.
Convertible top arm pad
p/n: 70-1216-67
Pad, top folding post. Fastens on lower end of post with two (2) screws. Metal core, close copy.
Landau bar spacer
p/n: 70-0351-67
Spacer, Landau bar, lower, for Landau jobs with cobra tops. Pattern on rubber matches cobra.
Detachable center post pad
p/n: 70-0280-88
Pads, folding front seat rest, brass core. Also used as bumper, slat iron to compartment on convertibles.Width: 1.375 inches. Height: .28125 inches.
Convertible top arm pad
p/n: 50-0310-67
Pad, folding post, lower, on bottom of post, held by two (2) screws. Brass core, right and left hand.Length: 1.4375 inches. Width: 1.5 inches.