Axle Rebound Pad Service
p/n: 10-0003-35
Pad, rear axle rebound, perfect duplication. Length: 4.0 inches. Height: 1.25 inches.
Axle Rebound Pad
p/n: 30-0043-32
Pads, front axle rebound. Correct shape and design like original.Length: 3.625 inches. Width: 2.125 inches. Height: 2.125 inches.
Vacuum Brake Cylinder Rod Boot
p/n: 70-0010-24
This Vacuum Brake Cylinder Rod Boot is designed from the original part for superior fitment and seal. Made from durable rubber to original configuration.
Body Mounting Pad
p/n: 70-0298-48
Pads, body mounting for front bracket, right and left. Three eighths (3/8) inch by two and three fourths (2-3/4) inch by four (4) inches with two (2) collars and retaining rings. Two (2) required per car.
Firewall Grommet
p/n: 17-0045-20
This Firewall Grommet is designed as a firewall pass through for eight (8) wires or cables. For twelve (12) cylinder models only. For eight (8) cylinder models see our 17-0044-20.
Axle Rebound Pad
p/n: 30-0054-32
Pads, rear axle rebound.Length: 5.125 inches. Width: 1.4375 inches.
Front Apron Crossbar Grommet
p/n: 70-1130-45
Grommets, front splash apron crossbar.Width: 3.5 inches. Height: 3.6875 inches.
Steering Column Grommet
p/n: 30-0046-36
Steering column to toe board grommet. Made with a brass core, like original. For one and one half (1-1/2) inch steering column tube.
Front Apron Crossbar Grommets
p/n: 70-1131-45
This Front Apron Crossbar Grommet pair is designed from the original part for superior fitment, finish and function. Width: 3-1/2" inches. Height: 3-1/2" inches.
2-3/16" Firewall Grommet
p/n: 17-0044-20
This Firewall Grommet is designed as a firewall pass through for six (6) wires or cables. For eight (8) cylinder models only. For twelve (12) cylinder models see our 17-0045-20.
Side Roof Rail Weatherstrip
p/n: 14-0038-67
Seal, quarter post to folding top, good copy of original. Four (4) piece set. Length: 11.625 inches.
Engine Mount Pad Set
p/n: 50-0224-11
This rear Engine Mount Pad Set is made of a special soft grade rubber, as original. Four (4) piece set.
Headlight Bar Grommet
p/n: 11-0002-14
Grommet, headlight bar-to-radiator shell. Includes clearance groove, faithful detail. 1-1/8 inch inside diameter.
Windshield Weatherstrip Set
p/n: 70-0097-52
This Windshield Weatherstrip Set seals the windshield glass to the body and protects the interior of the vehicle. Fully molded rubber channel for installing front window glass. All corners are correctly molded to fit perfectly.
Axle Rebound Pad
p/n: 40-0373-32
Bumpers, rear axle. Revulcanization service only.Length: 3.0 inches.
Hood bumper
p/n: 70-0013-42
Pads, hood hold-down clamp, mount on clamp swivels to hold hood corners in. Set of four (4) rubber pads in solid brass, chrome plated cups.
Brake and clutch pedal pad
p/n: 11-0008-22
Pad, brake and clutch pedal. Perfect copy of original, superior material and workmanship.
Windshield Weatherstrip Set
p/n: 70-0016-52
This three (3) piece Windshield Weatherstrip Set includes two 16-1/2" side weatherstrip channels and one 48" bottom weatherstrip channel. All corners are correctly molded to fit perfectly.
Rigid Run Channel
p/n: 70-0130-58
Special channel, felt lined rubber, for door upper front post for convertibles with cast upper post. Each piece sixteen (16) inches long.
Axle Rebound Pad
p/n: 15-0003-35
Bumper, frame to axle, rear, with steel core as original.Width: 3.0 inches.
Accelerator Pedal Pad
p/n: 15-0007-40
Pad, accelerator, slipover type for metal pedal, exact copy.Length: 9.4375 inches. Width: 2.50 inches.
Rumble Seat Step Pad
p/n: 11-0012-87
Cover, rumble seat step pad, slipover type, excellent copy.Width: 5.0 inches. Height: 5.0 inches.
Vacuum Clutch / Brake Cylinder Diaphragm
p/n: 50-0063-24
This Electromatic Clutch Control or Brake Vacuum Cylinder Diaphragm is designed from the original part for superior fitment and function. Used in different locations dependent upon vehicle make.
Brake and Clutch Pedal Pads
p/n: 25-0027-22
Pads, brake and clutch pedals.Length: 3.875 inches. Width: 2.875 inches.
Convertible Top Rest Block
p/n: 70-0069-67
Pads, convertible top rest for rear deck. Two heights as original for inner and outer positions. Four (4) piece set.
Ferrule Installing Tool
p/n: 70-0662-69
Installing tool, door and trunk handle ferrule. For cars and trucks using door and trunk handle ferrules such as our #70-0111-69.
Engine Mount Pad Set
p/n: 50-0266-11
This Engine Mount Pad Set is made of a special soft grade rubber, as original. Four (4) piece set.
Gearshift Floorplate
p/n: 40-0362-88
Draft pad or plate, gearshift and handbrake. Brass core as original.Length: 10.25 inches. Width: 7.0 inches.
Windshield Weatherstrip Seal Set
p/n: 70-0015-52
This Windshield Weatherstrip Seal Set includes two (2) 15" Single-Flap side weatherstrip seals and one (1) 45" Double-Flat bottom weatherstrip seal. The set seals the windshield glass to the body and protects the interior of vehicle.
Muffler Bypass Floor Plate
p/n: 11-0006-88
Floor plate, muffler bypass control. Brass core as original, fully detailed.
Front Engine Cushion Set
p/n: 25-0037-11
This four (4) piece Front Engine Cushion Set is molded from a high-quality EPDM dense rubber. Designed from an original part for an exact reproduction.
Handbrake Floorplate
p/n: 11-0005-24
Floor plate, handbrake lever. Brass core as original, fully detailed.
Door Check Strap
p/n: 40-0535-70
Strap, door check. T-type, special heavy duty construction of rubber with multiple ply webbing and molded-in steel crossbar. Full length as original with one eighth (1/8) inch by seven eighths (7/8) inch steel crossbar.
Hood Hinge Top Strap Pivot
p/n: 70-0045-42
A Hood Hinge Top Strap Pivot manufactured to OEM specifications to install for an authentic fit and finish. Cold rolled steel as original.
Engine Mount Cushion Set
p/n: 25-0038-11
This four (4) piece Engine Mount Cushion Set is molded from a high-quality EPDM dense rubber. Designed from an original part for an exact reproduction.
Steering Column Floorplate
p/n: 40-0145-88
Floorplate, steering column and pedals. Floorplate, steering column and pedals. Exquisite detail, brass core.This is a copy from Plymouth Model U.
Steering Column Floorplate
p/n: 40-0268-88
Floorplate for steering column and pedals. Original tread pattern. Customer may have to adapt existing fastening holes to their car.Length: 8.875 inches.
Windshield Weatherstrip Channel
p/n: 17-0032-52
This Windshield Weatherstrip Channel seals the windshield glass to body and protects interior of vehicle. Made from original parts to ensure great fit and easy installation.
Front Spring Bumper Service
p/n: 15-0006-35
Bumper, front spring to frame. Revulcanization service only.Width: 4.625 inches.
Steering Column Floorplate
p/n: 17-0004-36
Floorplate, steering column and pedal, black rubber only, close original detail.Width: 11.75 inches. Height: 7.75 inches.
Steering Column Floorplate
p/n: 40-0152-88
Floorplate, steering column and pedals. Perfect detail with brass core. (Similar to our #40-0145-88, compare sketches with your original to match).
Gearshift Floorplate
p/n: 40-0146-88
Floorplate, gearshift and handbrake. Perfect reproduction, including brass core.Length: 8.0 inches. Width: 7.25 inches.
Door Check Strap
p/n: 40-0536-70
Strap, door check. T-type, special heavy duty construction of rubber with multiple ply webbing, molded-in steel shank and molded-in steel crossbar. Full length as original with one eighth (1/8) inch by seven eighths (7/8) inch steel crossbar.
Distributor boot
p/n: 70-0004-21
Boot, distributor dust and moisture. Original equipment, exact copy. V-16 only.