Inside Door Handle Gaskets
p/n: 70-4811-69
This Inside Door Handle Gasket pair is designed from the original part for an authentic fit, finish, and appearance. Slips onto edge of hole where door handle comes out of the door panel.
Left (Driver's Side) Rear Cargo Door Weatherstrip
p/n: 82-0199-72
This Left Rear Cargo Door Weatherstrip is designed from the original part for superior fitment and sealing. This peel-n-stick weatherstrip is for the left (driver's side) cargo door at the rear of the van.
Liftgate Weatherstrip
p/n: 70-3008-84
This Liftgate - Upper Tailgate Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the liftgate with properly spaced plastic clips.
Liftgate Weatherstrip
p/n: 70-3509-85
This Liftgate Weatherstrip is designed from the original part for superior fitment and seal. The weatherstrip mounts around the full perimeter of the rear liftgate opening directly to the body.
Lock Cylinder Gasket
p/n: 60-0641-69
This Lock Cylinder Gasket is die cut from one-thirty-second (1/32) inch neoprene.
Lower Radiator Mount Insulators
p/n: 20-0936-31
This Lower Radiator Mount Insulator pair is designed from the original part for superior fitment and seal. Left and Right lower mounting pads for six (6) or eight (8) cylinder engines.
Paint Reseal and Gasket Set
p/n: 70-4310-44
This Paint Reseal Gasket Set contains like original design reproductions for the vehicles specific exterior pieces. These reproductions are die-cut from quality materials to the original design for superior performance, durability, and a factory like fit.
Peel-N-Stick Trunk Weatherstrip
p/n: 70-0510-WT
This Peel-N-Stick Trunk Weatherstrip is made from a high-quality EPDM sponge rubber. Available by the foot.
Pickup tie down mounting pad
p/n: 20-0885-45
Pad, pickup box tie down hook. Eight (8) required per truck.
Quarter Window Lockstrip - BLACK
p/n: 70-3202-52
This Quarter Window Lockstrip is designed from the original part for superior fitment and function. This black lockstrip inserts into the weatherstrip to lock in the window glass. Requires 2 sets per vehicle.
Quarter Window Lockstrip - CHROME
p/n: 70-3203-52
This Quarter Window Lockstrip is designed from the original part for superior fitment and function. This chrome lockstrip inserts into the weatherstrip to lock in the window glass. Requires 2 sets per vehicle.
Quarter Window Weatherstrip
p/n: 70-3288-77
Quarter Window Weatherstrip - This seal is for the rear stationary quarter windows. Used on vehicle models built after 5-1-1972.
Quarter Window Weatherstrip Without Trim Groove
p/n: 70-4024-77
This Quarter Window Weatherstrip Without Trim Groove, left and right gasket, fits the quarter window of the Bronco hardtop.
Quarter Window Weatherstrips with Trim Groove
p/n: 70-2480-77
This Quarter Window Weatherstrip pair is made from ozone resistant EPDM rubber and to the original for an authentic fit and finish. This window weatherstrip has a trim groove for a lockstrip.
Quarter Window Weatherstrips with Trim Groove
p/n: 70-2481-77
This Quarter Window Weatherstrip with Trim Groove pair is designed from the original part for superior fitment and seal. These Left and Right weatherstrips mount around the full perimeter of the quarter glass for a precise, factory fit. For models WITH reveal molding.
Radiator mounting pad
p/n: 70-2709-31
Support, lower radiator. See our #70-2712-31 for upper support cushion.
Radiator mounting pad
p/n: 70-2712-31
Support, upper radiator. See our #70-2709-31 for lower support cushion.
Radius Arm & Axle Pivot Bushing Set
p/n: 20-0779-32
This Radius Arm and Axle Pivot Bushings Set is a quality reproduction of the original factory part(s). This six (6) piece set includes two (2) each C5TZ-3B177-A, two (2) each D9TZ-3B203-A, and two (2) each E6TZ-3B203-A top quality bushings. Fits two-wheel (2WD) drive trucks.
Rear Cargo Door Hinge Gaskets Set
p/n: 60-0659-69
This four (4) piece molded Rear Cargo Door Hinge Gasket Set is made to original specifications for proper fitment. Seals are fully molded from top quality rubber to ensure durability, fitment and proper seal.
Rear Cargo Door Weatherstrips
p/n: 70-1925-72
This Rear Cargo Door Weatherstrip pair is designed from the original parts for superior fitment and seal. An authentic design with one door made with perimeter configuration, and other door seal made in single strip like original.
Rear Door weatherstrip
p/n: 82-0092-72
Door edge weatherstrip. This part is the primary door to body weatherstrip.
Rear Door Weatherstrip
p/n: 82-0141-72
This Rear Door Weatherstrip pair is designed from the original parts for superior fitment and seal. Made of quality sponge rubber with molded corners to ensure a durable positive seal.
Rear Door weatherstrip
p/n: 82-0090-72
Door edge weatherstrip. This part is the primary door to body weatherstrip. Each measures one hundred, twenty five and one quarter inches (125-1/4") long.
Rear Door Weatherstrips
p/n: 82-0191-72
This Rear Door Weatherstrip pair is designed from the original part for superior fitment and seal. These primary door weatherstrips mount (glue-on) directly to the left and right doors sealing the full perimeter of the doors against the vehicle body when the door is closed.
Rear Door Weatherstrips
p/n: 82-0123-72
This Rear Door Weatherstrip pair is designed from the original part for superior fitment and seal. These primary door weatherstrips mount (pin-on) directly to the left and right doors sealing the full perimeter of the doors against the vehicle body when the door is closed.
Rear Door Weatherstrips
p/n: 82-0088-72
This Rear Door Weatherstrip pair is the primary door to body weatherstrip. These door weatherstrips mount directly to the left and right rear doors sealing the full perimeter of the doors against the vehicle body when the door is closed.
Rear Hatch Door Bumpers
p/n: 70-4730-87
This Rear Hatch Door Bumper pair is a quality reproduction of the original factory part. These adjustable rubber bumpers attach to the rear hatch door to prevent the hatch lid from vibrating.
Rear Sliding Window Gasket
p/n: 70-4308-81
This two (2) piece Rear Sliding Window Gasket set mounts around the full perimeter of the back glass and has properly molded corners for a precise, factory fit. Includes locking strip for window gasket.
Rear Window Gasket
p/n: 70-2437-81
This Rear Window Gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the back glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation.
Rear Window Gasket
p/n: 70-3287-81
This Rear Window Gasket mounts around the full perimeter of the back glass and has properly molded corners for a precise, factory fit. It also has the slot to accommodate the outer edge's decorative molding.
Rear Window Gasket
p/n: 70-3512-81
This Rear Window Gasket mounts around the full perimeter of the back glass and has properly molded corners for a precise, factory fit. It also has the slot to accommodate the outer edge's decorative molding.
Rear Window Gasket
p/n: 70-2458-81
This Rear Window Gasket is designed from the original part for superior fitment and seal. The gasket mounts around the full perimeter of the back glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation.
Rear Window Gasket
p/n: 70-2706-81
This Rear Window Gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the back glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation.
Rear Window Gasket - King Cab Pickup
p/n: 70-4830-81
This Rear Window Gasket mounts around the full perimeter of the back glass and has properly molded corners for a precise, factory fit. This gasket also has the slot to accommodate the outer edge's decorative reveal molding.
Rear Window Gasket - No Groove
p/n: 20-0825-81
This Rear Window Gasket is designed from the original part for superior fitment and seal. The gasket mounts around the full perimeter of the back glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation.
Rear Window Gasket with Groove
p/n: 20-0972-81
This Rear Window Gasket with Groove mounts around the full perimeter of the back glass and has properly molded corners for a precise, factory fit. It also has the groove or slot to accommodate the outer edge's decorative (chrome) molding.
Rear Window Gasket with Groove
p/n: 70-1926-81
This Rear Window Gasket with Groove set contains the rear window gasket itself and the corner joint sleeves (stainless finish, can be painted black). The gasket mounts around the full perimeter of the back glass and has properly molded corners for a precise, factory fit.
Rear Window Gasket without Groove
p/n: 70-1722-81
This Rear Window Gasket without Groove mounts around the full perimeter of the back glass and has properly molded corners for a precise, factory fit. Fitted gasket provides a formed, seamless seal.
Rear Window Gasket without Groove - Standard Cab
p/n: 70-4521-83
This Rear Windshield Gasket for Standard Cabs mounts around the full perimeter of the rear glass and has properly molded corners for a precise, factory fit. This is a standard black gasket with NO reveal molding groove.
Removable Roof to Quarter Panel Weatherstrips
p/n: 70-4023-68
This Removable Roof To Quarter Panel Weatherstrip pair is designed from the original part for superior fitment and seal. This Left and Right side weatherstrip pair serve to seal between the top of the quarter panel and the removable hardtop roof.
Removable Top Front Weatherstrip - On Fiberglass Roof
p/n: 70-2999-68
This Removable Top Front Weatherstrip is designed from the original part for superior fitment and sealing. This weatherstrip installs directly on the front of the fiberglass roof shell with weatherstrip adhesive glue (not included) and presses against the metal roof cab weatherstrip.
Removable Top Front Weatherstrip - On Metal Cab Roof
p/n: 70-3000-68
This Removable Top Front Weatherstrip is designed from the original part for superior fitment and sealing. This part fits on the rear of the metal cab roof and seals against the removable fiberglass top when the top is placed on the vehicle.
Right (Passenger's Side) Rear Cargo Door Weatherstrip
p/n: 82-0200-72
This Right Rear Cargo Door Weatherstrip is designed from the original part for superior fitment and sealing. This peel-n-stick weatherstrip is for the right (passenger's side) cargo door at the rear of the van.
Side Cargo Door Weatherstrips
p/n: 70-4909-72
This left and right Side Cargo Door Weatherstrip pair is designed from the original part for superior fitment and seal. These weatherstrips mount (peel-n-stick) directly to the left (rear) and right (front) side cargo doors sealing the full perimeter of the doors against the vehicle body when the door is closed.
Side Window Glass Rear Weatherstrips
p/n: 82-0158-68
This Side Window Glass Rear Weatherstrip pair is designed from the original part for superior fitment and seal. This part attaches to the rear vertical B-post edge of the side windows for coupe and hatchback models.
Side Window Glass Run Channels
p/n: 70-3261-58
This Side Window Glass Run Channel pair is designed from the original part for superior fitment and seal. These two (2) pieces of flexible window run channel are for the sides and top of door windows.
Side Window Glass Run Channels
p/n: 70-2514-58
This Side Window Glass Run Channel pair is designed from the original part for superior fitment and seal. These two (2) pieces of flexible window run channel are for the sides and top of door windows.
Side Window Run Channel and Beltline Set
p/n: 70-2150-58
This eight (8) piece Side Window Run Channel and Beltline Set includes the Left and Right side run channels and Inner / Outer window felt beltline weatherstrips for the Front door windows of the vehicle.
Side Window Run Channel and Beltline Set
p/n: 70-4677-58
This six (6) piece Side Window Run Channel and Beltline Set includes the Left and Right side run channels and inner / outer window felt beltline weatherstrips for the rear door windows of the vehicle.
Slider Door weatherstrip
p/n: 82-0198-72
Slider door edge weatherstrip. Models with passenger side sliding doors. Proper extrusion for perimeter seal.
Splash Apron / A-Arm Dust Shield
p/n: 70-3316-45
This two (2) piece Splash Apron / A-Arm Dust Shield Filler set is designed from the original part for superior fitment and seal. Filler pieces are die cut from quality masticated rubber to authentic original dimensions. Pieces fit over suspension a-arms and inside front inner fenders.
Splash Apron / A-Arm Dust Shield
p/n: 70-3058-45
This two (2) piece Splash Apron / A-Arm Dust Shield Filler set is designed from the original part for superior fitment and seal. Filler pieces are die cut from quality masticated rubber to authentic original dimensions. Pieces fit over suspension a-arms and inside front inner fenders.
Splash Apron Dust Shield Fillers
p/n: 70-2723-45
This two (2) piece Splash Apron Dust Shield Filler pair is designed from the original part for superior fitment and seal. Filler pieces are die cut from quality masticated rubber to authentic original dimensions. Left and Right pieces install on front inner fender apron to frame.
Stabilizer Bar Bushings
p/n: 70-4678-34
This Stabilizer Bar to Frame Bushing pair may fit either front or rear stabilizer / sway bars depending on the vehicle. Manufactured with quality materials to original specifications.
Stabilizer Bar End Link Repair Set
p/n: 20-0783-33
This five (5) piece Stabilizer Bar End Link Repair Set is for the front or rear stabilizer bar. Two (2) per set. Used on Front for 1975-1979 F150-F350 series 4x2. Used on Rear for 1980-1989 F100-F350 series.
Stabilizer Bar End Link Set
p/n: 60-0221-33
Twenty-two (22) piece Stabilizer Bar End Link set for both sides of one (1) vehicle, fits front or rear bar. Order two (2) sets for vehicles with front and rear stabilizer bars. Hex head bolt 3/8"-16 NF x 6-15/16" long. Comes with metal sleeve, metal cup washers and rubber grommets.
Stationary quarter window seal
p/n: 70-3510-77
Rear stationary quarter window seals. Fully molded like the originals.
Steering Column - Floor Seal
p/n: 70-3358-36
This Steering Column is designed from the original part for superior fitment and sealing. Seal part is die cut from quality masticated rubber to authentic original dimensions. This part fits around the steering column to seal the column through the body floor pan inside the vehicle.
Steering Column At Floor Seal
p/n: 70-3490-36
This Steering Column At Floor Seal is designed from the original part for superior fitment and sealing. The seal is die cut from quality masticated rubber to authentic original dimensions. This part fits around the steering column to seal the column through the body floor pan.
Sunroof - On Body Weatherstrip
p/n: 70-4650-45
This Sunroof - On Body Weatherstrip is designed from the original part for superior fitment and seal. With push-on installation, the weatherstrip fits onto the molding channel that follows the sunroof trim on the body of the car. Seals the interior / exterior to prevent water, debris, and road noise infiltration.
Sunroof - On Glass Weatherstrip
p/n: 70-4649-45
This Sunroof - On Glass Weatherstrip is designed from the original part for superior fitment and seal. With push-on installation this weatherstrips wraps around the entirety of the sunroof glass. Weatherstrip seals the interior / exterior to prevent water, debris, and road noise infiltration.
Swing-Out Quarter Window Weatherstrips
p/n: 70-4124-76
This Swing-Out Quarter Window Weatherstrip pair is not a reproduction of an OEM part, but rather an expertly engineered solution specific for this application. Guaranteed performance and "factory-like" look.
Tailgate Bumper
p/n: 20-0694-45
These Tailgate Bumpers are sold as pair. The bumpers fit in brackets and comes with chains.
Tailgate Glass Run Channel
p/n: 70-3001-58
This Tailgate Glass Run Channel presses into the channel in the rear of the shell and the glass then rolls up into the run channel. Made from original specs and from high quality ozone resistant materials to fit your vehicle.
Tailgate To Body Weatherstrip
p/n: 70-4020-45
This Tailgate To Body Weatherstrip is properly molded from originals for a factory like fit and appearance.
Tailgate Weatherstrip
p/n: 70-3009-84
This Tailgate Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts to the sides and bottom of the tailgate with properly spaced plastic clips. Includes molded ends.
Tailgate Weatherstrip
p/n: 70-2434-72
This Tailgate Weatherstrip reproduction is designed from the original part for superior fitment and seal. This weatherstrip mounts on three (3) sides of the tailgate with weatherstrip adhesive (not included).
Tailgate Window Felt Weatherstrips
p/n: 80-1058-57
This Tailgate Window Felt Weatherstrip reproduction set is designed from the original part for superior fitment and seal. This window felt molding mounts to the tailgate with attached clips. These window felts wipe the tailgate window glass when the glass is lowered.
Taillight Housing To Body Gaskets
p/n: 70-4544-15
This Taillight Housing to Body Gasket pair is designed from the original part for superior fitment and seal. These reproduction seals fits between the taillight housing and the vehicle body to keep water and debris out of the trunk or hatch.
Top of Door Weatherstrips - Roof Rail
p/n: 70-4022-73
This Top of Door Weatherstrip - Roof Rail pair for the left and right side doors seal the door window frame to the roof hardtop and to the windshield frame.
Transmission Mount
p/n: 70-2058-25
This Transmission Mount is a new aftermarket replacement mount manufactured to meet or exceed factory specifications.. One (1) required per vehicle.
Trunk Bumpers - Coupe or Convertible
p/n: 70-4732-87
This Trunk Bumper pair is a quality reproduction of the original factory part. These dense rubber bumpers attach to the vehicle body to support / cushion the trunk lid closure.
Trunk Weatherstrip
p/n: 82-0217-84
This Trunk Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.
Trunk Weatherstrip
p/n: 82-0033-84
This Trunk Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.
Trunk Weatherstrip
p/n: 70-3347-84
This Trunk Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.
Trunk Weatherstrip
p/n: 82-0028-84
This Trunk Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.
Trunk Weatherstrip
p/n: 20-2865-84
This Trunk Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.
T-Top On Body Weatherstrips
p/n: 83-1002-68
This T-Top Body Weatherstrip pair is designed from the original part for superior fitment and seal. This part fits on the body of the vehicle and seals the front section of the side window and the removable section of the roof.
T-Top Panel Weatherstrips
p/n: 82-0175-68
This T-Top Panel Weatherstrip pair installs around the perimeter of the removable T-Top Panels. Includes molded corners and steel cores across window side. Fits later integral metal retainer / 18 plastic push pins T-Top panels.
T-Top Roof Rail Weatherstrips - FISHER Tops
p/n: 82-0057-72
This T-Top Roof Rail Weatherstrip pair is for models with FISHER style T-Top hatch seals with One-Handle release. These reproduction seals are designed from the original part for positive fitment and seal. Weatherstrips are fully molded with accurate fitting corners and smooth skin sponge rubber construction.
T-Top Roof Side Rail Weatherstrips
p/n: 83-1003-68
This T-Top Roof Side Rail Weatherstrip pair is designed from the original part for superior fitment and seal. This weatherstrip serves as the over door seal, attaching to the removeable roof section.
T-Top Side Rail Weatherstrips - FISHER Tops
p/n: 82-0179-68
This T-Top Side Rail Weatherstrip pair is for models with FISHER style T-Top hatch seals with One-Handle release. These reproduction seals are designed from the original part for positive fitment and seal. Fully molded with smooth skin sponge rubber construction.
Vent Window Division Post Weatherstrips
p/n: 70-1923-56
This Front Vent Window Division Post Weatherstrip pair is designed from the original part for superior fitment and seal. This piece mounts on the vertical division bar with rivets and the vent glass closes against it.
Vent Window Pivot Post Rivet
p/n: 70-4757-98
This Vent Window Pivot Post Rivet is used to replace the hinge pivot rivet for both left and right vent window assemblies. Commonly used for General Motors car and truck models.
Vent Window Rebuild Set
p/n: 70-4801-70
This Vent Window Rebuild Set includes glass setting tape (1/16 thick), hinge pivot step rivet pair, and a rivet peening punch. The set has enough materials for both the passenger side and driver side vent window assemblies.
Vent Window Rivets and Setting Tool
p/n: 70-4789-70
This Vent Window Rivet pair and Setting Tool includes the peening punch and step rivets to replace the hinge pivot rivet for both left and right vent window assemblies.
Vent Window Weatherstrip Set
p/n: 70-4547-55
This Front Door Vent Window Weatherstrip Set is designed from the original parts for superior fitment, finish and function. A four (4) piece (with end caps) set that fits both driver (Left) and passenger (Right) front doors of the vent / wing window assemblies.
Vent Window Weatherstrips
p/n: 70-4745-55
This Front Door Vent Window Weatherstrip pair is designed from the original parts for superior fitment and seal. A two (2) piece pair that fits both driver (Left) and passenger (Right) front doors of the vent / wing window assemblies.
Vent Window Weatherstrips
p/n: 70-4543-55
This Front Door Vent Window Weatherstrip pair is designed from the original parts for superior fitment and seal. A two (2) piece pair that fits both driver (Left) and passenger (Right) front doors of the vent window assemblies.
Window Felt and Run Channel Set
p/n: 80-0937-57
This high-quality six (6) piece Window Felt and Run Channel set is made to original specifications to correctly fit your vehicle. This set includes the window felt beltline moldings (with the pre-applied clips) and glass run channels for both the driver and passenger front doors.
Window Felt and Run Channel Set
p/n: 80-0936-57
This high-quality material Window Felt and Run Channel Weatherstrip set includes the window felt rubber weatherstrips that wipe the side windows when the glass is lowered as well as the glass run channel that holds the glass in place. Complete set does both front doors.