Rear Window Gasket - No Groove
p/n: 20-0825-81
This Rear Window Gasket is designed from the original part for superior fitment and seal. The gasket mounts around the full perimeter of the back glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation.
Rear Window Gasket with Groove
p/n: 20-0972-81
This Rear Window Gasket with Groove mounts around the full perimeter of the back glass and has properly molded corners for a precise, factory fit. It also has the groove or slot to accommodate the outer edge's decorative (chrome) molding.
Rear Window Gasket with Groove
p/n: 70-1926-81
This Rear Window Gasket with Groove set contains the rear window gasket itself and the corner joint sleeves (stainless finish, can be painted black). The gasket mounts around the full perimeter of the back glass and has properly molded corners for a precise, factory fit.
Rear Window Gasket with Sliding Window
p/n: 20-0973-81
This Rear Window Gasket mounts around the full perimeter of the back glass and has vulcanized, or bonded, ends. This gasket is for truck models that have a factory sliding glass rear window. The gasket has a groove for the narrow plastic chrome trim.
Rear Window Gasket without Groove
p/n: 70-1722-81
This Rear Window Gasket without Groove mounts around the full perimeter of the back glass and has properly molded corners for a precise, factory fit. Fitted gasket provides a formed, seamless seal.
Rear Window Gasket without Groove - Standard Cab
p/n: 70-4521-83
This Rear Windshield Gasket for Standard Cabs mounts around the full perimeter of the rear glass and has properly molded corners for a precise, factory fit. This is a standard black gasket with NO reveal molding groove.
Removable Roof to Quarter Panel Weatherstrips
p/n: 70-4023-68
This Removable Roof To Quarter Panel Weatherstrip pair is designed from the original part for superior fitment and seal. This Left and Right side weatherstrip pair serve to seal between the top of the quarter panel and the removable hardtop roof.
Removable Top Front Weatherstrip - On Fiberglass Roof
p/n: 70-2999-68
This Removable Top Front Weatherstrip is designed from the original part for superior fitment and sealing. This weatherstrip installs directly on the front of the fiberglass roof shell with weatherstrip adhesive glue (not included) and presses against the metal roof cab weatherstrip.
Removable Top Front Weatherstrip - On Metal Cab Roof
p/n: 70-3000-68
This Removable Top Front Weatherstrip is designed from the original part for superior fitment and sealing. This part fits on the rear of the metal cab roof and seals against the removable fiberglass top when the top is placed on the vehicle.
Right (Passenger's Side) Rear Cargo Door Weatherstrip
p/n: 82-0200-72
This Right Rear Cargo Door Weatherstrip is designed from the original part for superior fitment and sealing. This peel-n-stick weatherstrip is for the right (passenger's side) cargo door at the rear of the van.
Side Window Glass Run Channels
p/n: 70-2514-58
This Side Window Glass Run Channel pair is designed from the original part for superior fitment and seal. These two (2) pieces of flexible window run channel are for the sides and top of door windows.
Side Window Glass Run Channels
p/n: 70-3261-58
This Side Window Glass Run Channel pair is designed from the original part for superior fitment and seal. These two (2) pieces of flexible window run channel are for the sides and top of door windows.
Side Window Glass Run Channels - Convertibles and T-Tops
p/n: 70-4653-58
This Side Window Glass Run Channel pair is designed from the original part for superior fitment and seal. These two (2) pieces of flexible window run channel are for the sides and top of door windows. The pair comes with both the left and right run channel for models with Convertibles and T-Tops.
Side window leading edge
p/n: 70-3444-80
Side window vertical leading edge weatherstrip. This part attaches to the vertical edge of the rear side windows when the rear side windows are fully raised. Molded authentic rubber construction with metal core, this part does not include the chrome piece
Side Window Run Channel and Beltline Set
p/n: 70-2151-58
This six (6) piece Side Window Run Channel and Beltline Set includes the Left and Right side run channels and Inner / Outer window felt beltline weatherstrips for the Front door windows of the vehicle.
Side Window Run Channel and Beltline Set
p/n: 70-4677-58
This six (6) piece Side Window Run Channel and Beltline Set includes the Left and Right side run channels and inner / outer window felt beltline weatherstrips for the rear door windows of the vehicle.
Slider Door weatherstrip
p/n: 82-0198-72
Slider door edge weatherstrip. Models with passenger side sliding doors. Proper extrusion for perimeter seal.
Splash Apron
p/n: 70-2729-45
This Splash Apron pair is designed from the original part for superior fitment and seal. Attaches to front inner fenders at the sway bar pass-thru.
Splash Apron / A-Arm Dust Shield Filler
p/n: 70-2799-45
This Splash Apron / A-Arm Dust Shield Filler pair is designed from the original part for superior fitment and seal. Filler pair pieces are die cut from quality masticated rubber to authentic original dimensions. Left and Right pieces fit over suspension a-arms and inside front inner fenders.
Splash Apron / A-Arm Dust Shield Fillers
p/n: 70-4927-45
This Splash Apron / A-Arm Dust Shield Filler pair is designed from the original part for superior fitment and function. Filler pieces are die cut from quality 3/32" masticated rubber to authentic original dimensions.
Splash Apron Dust Shield Fillers
p/n: 70-2723-45
This two (2) piece Splash Apron Dust Shield Filler pair is designed from the original part for superior fitment and seal. Filler pieces are die cut from quality masticated rubber to authentic original dimensions. Left and Right pieces install on front inner fender apron to frame.
Stabilizer Bar Bushings
p/n: 70-4678-34
This Stabilizer Bar to Frame Bushing pair may fit either front or rear stabilizer / sway bars depending on the vehicle. Manufactured with quality materials to original specifications.
Stabilizer Bar End Link Repair Set
p/n: 20-0783-33
This five (5) piece Stabilizer Bar End Link Repair Set is for the front or rear stabilizer bar. Two (2) per set. Used on Front for 1975-1979 F150-F350 series 4x2. Used on Rear for 1980-1989 F100-F350 series.
Stabilizer Bar End Link Set
p/n: 60-0221-33
Twenty-two (22) piece Stabilizer Bar End Link set for both sides of one (1) vehicle, fits front or rear bar. Order two (2) sets for vehicles with front and rear stabilizer bars. Hex head bolt 3/8"-16 NF x 6-15/16" long. Comes with metal sleeve, metal cup washers and rubber grommets.
Sunroof - On Body Weatherstrip
p/n: 70-4650-45
This Sunroof - On Body Weatherstrip is designed from the original part for superior fitment and seal. With push-on installation, the weatherstrip fits onto the molding channel that follows the sunroof trim on the body of the car. Seals the interior / exterior to prevent water, debris, and road noise infiltration.
Sunroof - On Glass Weatherstrip
p/n: 70-4649-45
This Sunroof - On Glass Weatherstrip is designed from the original part for superior fitment and seal. With push-on installation this weatherstrips wraps around the entirety of the sunroof glass. Weatherstrip seals the interior / exterior to prevent water, debris, and road noise infiltration.
Tailgate Bumper
p/n: 20-0694-45
These Tailgate Bumpers are sold as pair. The bumpers fit in brackets and comes with chains.
Tailgate Glass Run Channel
p/n: 70-3001-58
This Tailgate Glass Run Channel presses into the channel in the rear of the shell and the glass then rolls up into the run channel. Made from original specs and from high quality ozone resistant materials to fit your vehicle.
Tailgate To Body Weatherstrip
p/n: 70-4020-45
This Tailgate To Body Weatherstrip is properly molded from originals for a factory like fit and appearance.
Tailgate Weatherstrip
p/n: 70-3009-84
This Tailgate Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts to the sides and bottom of the tailgate with properly spaced plastic clips. Includes molded ends.
Tailgate Weatherstrip
p/n: 70-2434-72
This Tailgate Weatherstrip reproduction is designed from the original part for superior fitment and seal. This weatherstrip mounts on three (3) sides of the tailgate with weatherstrip adhesive (not included).
Tailgate Window Felt Beltline Weatherstrips
p/n: 80-0804-57
This Tailgate Glass Window Felt Beltline Weatherstrip reproduction pair is designed from the original part for superior fitment and seal. This window felt molding mounts to the tailgate with the included fasteners.
Tailgate Window Felt Weatherstrips
p/n: 80-1058-57
This Tailgate Window Felt Weatherstrip reproduction set is designed from the original part for superior fitment and seal. This window felt molding mounts to the tailgate with attached clips. These window felts wipe the tailgate window glass when the glass is lowered.
Top of Door Weatherstrips - Roof Rail
p/n: 70-4022-73
This Top of Door Weatherstrip - Roof Rail pair for the left and right side doors seal the door window frame to the roof hardtop and to the windshield frame.
Trunk - Decklid Bumper
p/n: 70-3528-87
This Trunk-Decklid Bumper is a quality reproduction of the original factory part. This adjustable rubber bumper attaches to the vehicle body to support / cushion the trunk lid closure.
Trunk Bumpers - Coupe or Convertible
p/n: 70-4732-87
This Trunk Bumper pair is a quality reproduction of the original factory part. These dense rubber bumpers attach to the vehicle body to support / cushion the trunk lid closure.
Trunk Decklid Adjustable Bumper
p/n: 70-2708-87
This Trunk Decklid Bumper is a quality reproduction of the original factory part. This adjustable rubber bumper attaches to the vehicle body to support / cushion the trunk lid closure. Screws into trunk. Two (2) required per car.
Trunk Hinge Gaskets - Convertible
p/n: 70-4657-87
This Trunk Hinge Gasket pair is designed from the original part for superior fitment, finish and function. On Convertibles the gasket pair install between the plastic hinge cover and the trunk lid on the exterior (near the rear window).
Trunk Or Hatchback Weatherstrip
p/n: 82-0038-84
This Trunk Or Hatchback Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk or hatchback opening directly to the body.
Trunk Weatherstrip
p/n: 20-2865-84
This Trunk Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.
Trunk Weatherstrip
p/n: 82-0217-84
This Trunk Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.
Trunk Weatherstrip
p/n: 82-0033-84
This Trunk Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.
T-Top Beaded Felt Weatherstrip
p/n: 70-4651-68
This T-Top Beaded Felt Weatherstrip is designed from the original part for superior fitment, finish and function. This felt weatherstrip installs at the front and rear edges of the roof at the T-Top opening. Sold Individually - Purchase two (2) if replacing both Front and Rear.
T-Top Body Weatherstrip Kit with Plastic Drip Edge
p/n: 90-3381-90
This twelve (12) piece Body Weatherstrip Kit includes the major weatherstrip components needed for the body of your T-Top Chevrolet Camaro or Pontiac Firebird with plastic drip edges. We’ve put everything together in one simple and convenient kit.
T-Top Body Weatherstrip Kit with Rubber Drip Edge
p/n: 90-3599-90
This twelve (12) piece Body Weatherstrip Kit includes the major weatherstrip components needed for the body of your T-Top Chevrolet Camaro or Pontiac Firebird with plastic drip edges. We’ve put everything together in one simple and convenient kit.
T-Top Drip Edge Flap Seals - Plastic
p/n: 70-4331-68
This T-Top Outer Drip Edge Flap Seal pair is designed from the original part for superior fitment and seal. These plastic "flap seal" pieces install on the T-Top itself. Replacing these will aid in reducing wind noise and keep rain out of your T-Top roofed F-body.
T-Top Drip Edge Flap Seals - Rubber
p/n: 70-4707-68
This T-Top Outer Drip Edge Flap Seal pair is designed from the original part for superior fitment and seal. These rubber "flap seal" pieces install on the T-Top itself. Replacing these will aid in reducing wind noise and keep rain out of your T-Top roofed F-body.
T-Top Headliner Retainer
p/n: 70-4652-88
This T-Top Headliner Retainer is designed from the original part for superior fitment, finish and function. This retainer strip pinches the headliner to the body to hold it in place. Sold Individually - Purchase two (2) to complete the driver and passenger overhead panel.
T-Top On Body Weatherstrips
p/n: 83-1002-68
This T-Top Body Weatherstrip pair is designed from the original part for superior fitment and seal. This part fits on the body of the vehicle and seals the front section of the side window and the removable section of the roof.
T-Top Roof Rail on Body Weatherstrip
p/n: 20-2815-68
This T-Top Roof Rail on Body Weatherstrip is the inner seal between the T-Top panel and the body. The pillar length measures approximately thirty (38) inches.
T-Top Roof Side Rail Weatherstrips
p/n: 83-1003-68
This T-Top Roof Side Rail Weatherstrip pair is designed from the original part for superior fitment and seal. This weatherstrip serves as the over door seal, attaching to the removeable roof section.
T-Top Side Rail Weatherstrip Metal Retainer Channels
p/n: 70-4708-68
This T-Top Side Rail Weatherstrip Metal Retainer Channel pair is designed from the original part for superior fitment and functon. These channels mount to the removable T-Top panels. The channels hold the side rail rubber weatherstrip to the T-Top glass panel.
T-Top Side Rail Weatherstrips
p/n: 82-0186-68
This T-Top Side Rail Weatherstrip pair is designed from the original part for superior fitment and seal. This part fits on the roof of the vehicle and seals the side window when the window is fully raised.
T-Top To Body Weatherstrips
p/n: 83-1000-68
This T-Top To Body Weatherstrip pair installs up the A pillar, into the T-Top opening and back down the C Pillar. Fits models with factory T-top option.
T-Top Trim Panel to Latch Handle Seals
p/n: 20-2806-67
This T-Top Trim Panel to Latch Handle Seal pair is designed from the original part for superior fitment and seal. These seals glue onto the plastic trim panel where latch handle goes through the panel.
T-Top Weatherstrip Set with Plastic Drip Edge
p/n: 90-3597-90
This T-Top Weatherstrip Set is designed from the original part for superior fitment and seal. This eight (8) piece weatherstrip set is for Camaro or Firebird models with Plastic Drip Edges.
T-Top Weatherstrip Set with Rubber Drip Edge
p/n: 90-3598-90
This T-Top Weatherstrip Set is designed from the original part for superior fitment and seal. This eight (8) piece set is for Camaro or Firebird models with Rubber Drip Edges.
T-Top Weatherstrips
p/n: 20-2814-68
This T-Top Weatherstrip fits on the removable roof inserts of the vehicle and seals the side window when the window is fully raised.
Upper Liftgate Weatherstrip
p/n: 70-4323-83
This Upper Liftgate Weatherstrip is designed from the original part for superior fitment and seal. This weatherstrip mounts (push pin) directly on the vehicle body to seal the liftgate door when closed.
Vent Window Pivot Post Rivet
p/n: 70-4757-98
This Vent Window Pivot Post Rivet is used to replace the hinge pivot rivet for both left and right vent window assemblies. Commonly used for General Motors car and truck models.
Vent Window Rebuild Set
p/n: 70-4801-70
This Vent Window Rebuild Set includes glass setting tape (1/16 thick), hinge pivot step rivet pair, and a rivet peening punch. The set has enough materials for both the passenger side and driver side vent window assemblies.
Vent Window Rivets and Setting Tool
p/n: 70-4789-70
This Vent Window Rivet pair and Setting Tool includes the peening punch and step rivets to replace the hinge pivot rivet for both left and right vent window assemblies.
Window Felt and Run Channel Set
p/n: 80-0936-57
This high-quality material Window Felt and Run Channel Weatherstrip set includes the window felt rubber weatherstrips that wipe the side windows when the glass is lowered as well as the glass run channel that holds the glass in place. Complete set does both front doors.
Window Felt and Run Channel Set
p/n: 70-2512-59
This six (6) piece Window Felt and Run Channel set is designed from the original part for superior fitment and function. This front door glass "anti-rattler" set includes one (1) pair of flexible run channels and inner / outer beltline weatherstrips.
Window Felt and Run Channel Set
p/n: 70-2589-58
This six (6) piece Window Felt and Run Channel Set includes the window felt beltline weatherstrip and run channels needed for the side window glass. The set does two (2) front doors.
Window Felt and Run Channel Set
p/n: 80-0937-57
This high-quality six (6) piece Window Felt and Run Channel set is made to original specifications to correctly fit your vehicle. This set includes the window felt beltline moldings (with the pre-applied clips) and glass run channels for both the driver and passenger front doors.
Window Felt Beltline Weatherstrips
p/n: 80-0735-57
Original equipment style side window horizontal seal (also known as beltline weatherstrip). These strips wipe the side windows when the glass is lowered. They come ready to install with finished ends.