Side Window Vertical Leading Edge Weatherstrips
p/n: 82-0149-80
This quarter to side window Vertical Leading Edge Weatherstrip pair is designed from the original part for superior fitment and seal. This part attaches to the vertical edge of the rear side windows when the rear side windows are fully raised.
Side Window Weatherstrip Set
p/n: 20-0898-58
This comprehensive, eight (8) piece, Side Window Weatherstrip set is designed from the original parts for superior fitment and seal. The anti-rattler set includes the window felt "anti-rattler" black bead beltline weatherstrips, door glass run channels and glass division bars.
Side Window Weatherstrip Set
p/n: 70-4482-58
This eight (8) piece set is designed from the original part for superior fitment and seal. The "anti-rattler" set includes the back edge of vent window seal installed, black bead window felt beltline weatherstrips, door glass runs with rivets and vent bar channel.
Side Window Weatherstrip Set
p/n: 70-4479-58
This comprehensive, twelve (12) piece, Side Window Weatherstrip set is designed from the original part for superior fitment and seal. The "anti-rattler" set includes the back edge of vent window seal installed, window felt beltline weatherstrips, door glass runs with rivets and vent bar channel.
Sliding Quarter Window Weatherstrip
p/n: 70-0353-78
This Sliding Quarter Window Weatherstrip is used for side window inner and/or outer, front and/or rear doors. Available in a 6ft. lengths.
Sound Deadener Underlayment Set
p/n: 70-4602-88
This five (5) piece die-cut Sound Deadener Underlayment Set lays under the carpet. This sound deadener will decrease road noise and decrease heat inside the interior compartment. Pre-cut and ready to be installed into your vehicle to improve driving comfort.
Splash Apron
p/n: 20-0879-44
This two (2) piece Splash Apron pair is designed from the original part for superior fitment and seal. Fasteners included. This is a front fender to hood hinge support seal.
Splash Apron
p/n: 20-0880-44
This two (2) piece Splash Apron is designed from the original part for superior fitment and seal. Installs between the front fender and front body pillar.
Splash Apron
p/n: 20-2763-45
This ten (10) piece Splash Apron set is designed from the original part for superior fitment and seal. Original type plastic fasteners included.
Splash Apron
p/n: 20-0878-44
This two (2) piece Splash Apron is designed from the original part for superior fitment and seal. Front fender apron to firewall lower seal. Staples included.
Splash Apron / A-Arm Dust Shield
p/n: 70-3361-45
This two (2) piece Splash Apron / A-Arm Dust Shield Filler set is designed from the original part for superior fitment and seal. Filler pieces are die cut from quality masticated rubber to authentic original dimensions. Pieces fit over suspension a-arms and inside front inner fenders.
Splash Apron / A-Arm Dust Shield Filler
p/n: 70-3062-45
This two (2) piece Splash Apron / A-Arm Dust Shield Filler pair is designed from the original part for superior fitment and seal. Filler pieces are die cut from quality masticated rubber to authentic original dimensions. Left and Right pieces fit over suspension a-arms and inside front inner fenders.
Splash Apron / A-Arm Dust Shield Filler
p/n: 70-3691-45
This two (2) piece Splash Apron / A-Arm Dust Shield Filler pair is designed from the original part for superior fitment and seal. Filler pieces are die cut from quality masticated rubber to authentic original dimensions. Left and Right pieces fit over suspension a-arms and inside front inner fenders.
Splash Apron / A-Arm Dust Shield Filler
p/n: 70-3484-45
This two (2) piece Splash Apron / A-Arm Dust Shield Filler pair is designed from the original part for superior fitment and seal. Filler pieces are die cut from quality masticated rubber to authentic original dimensions. Left and Right pieces fit over suspension a-arms and inside front inner fenders.
Splash Apron / A-Arm Dust Shield Filler
p/n: 70-4304-45
This two (2) piece Splash Apron / A-Arm Dust Shield Filler pair is designed from the original part for superior fitment and seal. Filler pieces are die cut from quality masticated rubber to authentic original dimensions. Pieces fit over suspension a-arms and inside front inner fenders.
Splash Apron / A-Arm Dust Shield Filler Set
p/n: 70-2499-45
This six (6) piece Splash Apron / A-Arm Dust Shield Filler set is designed from the original part for superior fitment and seal. Filler pieces are die cut from quality masticated rubber to authentic original dimensions. Pieces fit over suspension a-arms and inside front inner fenders.
Splash Apron / A-Arm Dust Shield Filler Set
p/n: 70-3309-45
This five (5) piece Splash Apron / A-Arm Dust Shield Filler set is designed from the original part for superior fitment and function. Filler pieces are die cut from quality masticated rubber to authentic original dimensions.
Splash Apron / A-Arm Dust Shield Kit
p/n: 70-2498-45
This eight (8) piece Splash Apron / A-Arm Dust Shield set is designed from the original part for superior fitment and seal. Filler pieces are die cut from quality masticated rubber to authentic original dimensions. Pieces fit over suspension a-arms and inside front inner fenders.
Splash Apron Fender Seal
p/n: 20-0877-44
This Splash Apron Fender Seal pair installs from the inner fender panel to the firewall. Made of high quality EPDM rubber and to the original design for a factory like fit.
Splash Apron Filler Shield Set
p/n: 70-2510-45
This four (4) piece Splash Apron / A-Arm Dust Shield Filler Set is designed from the original part for superior fitment and seal. Filler pieces are die cut from quality masticated rubber to authentic original dimensions. Pieces fit over suspension a-arms and inside front inner fenders.
Spring Shackle and Bushing Set
p/n: 20-2731-32
This Spring Shackle and Bushing Set is for the rear of the rear leaf spring. Designed from original parts for a precise, factory fit. Two (2) sets required per car.
Stabilizer Bar Bushings
p/n: 70-4678-34
This Stabilizer Bar to Frame Bushing pair may fit either front or rear stabilizer / sway bars depending on the vehicle. Manufactured with quality materials to original specifications.
Stabilizer Bar End Link Repair Set
p/n: 20-1068-33
This eleven (11) piece Stabilizer Bar End Link Repair Set is designed to withstand harsh conditions without deteriorating. Two (2) end link sets required per car.
Stabilizer Bar End Link Set
p/n: 60-0221-33
Twenty-two (22) piece Stabilizer Bar End Link set for both sides of one (1) vehicle, fits front or rear bar. Order two (2) sets for vehicles with front and rear stabilizer bars. Hex head bolt 3/8"-16 NF x 6-15/16" long. Comes with metal sleeve, metal cup washers and rubber grommets.
Stabilizer Link or Shock Grommet
p/n: 70-0737-33
This Stabilizer Link or Shock Grommet is designed from the original part for superior fitment and usage. Fully molded rubber.
Standard Bumper
p/n: 20-0001-88
This Standard Bumper pair is designed from the original part for superior fitment and function. This rubber bumper fits ashtray or glovebox doors.
Stationary Window Gasket
p/n: 70-4743-77
This Stationary Window Gasket is designed from the original part for superior fitment and seal. This window channel seal fits between the side or rear stationary window glass and door body.
Stationary Window Gasket Set
p/n: 70-3826-81
This Stationary Window Gasket Set is for the Side or Rear stationary (fixed) windows. The set contains the window gasket itself and the locking strip. The seal mounts around the full perimeter of the glass and the locking strip holds it tight for a precise, factory fit.
Steering Column - Floor Seal
p/n: 70-3495-36
This Steering Column is designed from the original part for superior fitment and sealing. Seal part is die cut from quality masticated rubber to authentic original dimensions. This part fits around the steering column to seal the column through the body floor pan inside the vehicle.
Steering Column at Floor Seal
p/n: 70-3693-36
This Steering Column At Floor Seal is designed from the original part for superior fitment and sealing. Seal part is die cut from quality masticated rubber to authentic original dimensions. This part fits around the steering column to seal the column through the body floor pan.
Steering Column At Floor Seal
p/n: 70-4629-36
This Steering Column At Floor Seal is designed from the original part for superior fitment and sealing. This gasket is manufactured from top quality sponge rubber to authentic original dimensions. This part fits around the steering column to seal the column through the body floor pan.
Steering Column At Floor Seal - with Tilt
p/n: 70-4625-36
This Steering Column At Floor Seal - with Tilt Wheel is designed from the original part for superior fitment and sealing. This gasket is manufactured from top quality sponge rubber to authentic original dimensions. This part fits around the steering column to seal the column through the body floor pan.
Steering Column At Floor Seal - without Tilt
p/n: 70-4461-36
This Steering Column At Floor Seal - without Tilt Wheel is designed from the original part for superior fitment and sealing. This gasket is manufactured from top quality sponge rubber to authentic original dimensions. This part fits around the steering column to seal the column through the body floor pan.
Steering Column Grommet
p/n: 70-3158-36
This Steering Column Grommet is designed from the original part for superior fitment and seal. This seal fits around the steering column at the toe board.
Steering Column Lower Flange Insulator
p/n: 20-1532-88
This Steering Column Lower Flange Insulator is designed from the original part for superior fitment and function. This insulator fits around the lower steering column inside the vehicle to prevent metal to metal contact.
Steering Column To Floor Seal
p/n: 20-0785-36
This Steering Column To Floor Seal is designed from the original part for superior fitment and seal. Restores the cab to floor sealing against the outside elements. For Manual Steering models.
Steering Column To Floor Seal
p/n: 20-1071-36
This Steering Column is designed from the original part for superior fitment and sealing. Seal part is die cut from quality masticated rubber to authentic original dimensions. This part fits around the steering column to seal the column through the body floor pan inside the vehicle.
Steering Column Tube To Floor Gasket
p/n: 20-1531-88
This Steering Column Tube To Floor Gasket is designed from the original part for superior fitment and sealing. This part fits around the steering column to seal the column tube through the body floor pan.
Sun Visor Tips
p/n: 20-2882-88
These Sun Visor Tips are reproductions manufactured to OEM specifications to install for an authentic fit, finish and function. Sold as a pair.
Suspension Bushing
p/n: 70-3345-35
Bushing, rear shackle to body insulating mounts, upper. This is a four (4) piece set. Replaces OEM # 397225
Tailgate Bumper
p/n: 20-0888-45
These Tailgate Bumpers are designed from original parts for a correct fit. Sold as a pair.
Tailgate Bumper
p/n: 70-1910-87
This Tailgate Bumper is designed from the original part for superior fitment, finish and function. This station wagon tailgate bumper is commonly used on GM station wagon models.
Tailgate Bumper
p/n: 20-0801-45
This Tailgate Bumper is used as a retaining support. Two (2) are required per truck.
Tailgate Bumper
p/n: 20-0694-45
These Tailgate Bumpers are sold as pair. The bumpers fit in brackets and comes with chains.
Tailgate Bumper
p/n: 70-1609-87
This Tailgate Bumper is a quality reproduction of the original factory part. Made of a high-quality EPDM rubber, the bumper attaches to the vehicle body to support / cushion the tailgate closure.
Tailgate Bumper - Upper and Lower
p/n: 70-1827-87
This upper / lower Tailgate Bumper is designed from the original part for superior fitment and seal. Fully molded with top quality EPDM rubber over corrosion resistant brass cores to ensure durability and function.
Tailgate Drain Seals - Body Side
p/n: 70-4008-85
This Tailgate Drain Seals - Body Side seal pair includes both right and left sides. These seals are properly molded from originals for a factory like fit.
Tailgate Handle Gasket
p/n: 70-3867-86
This Tailgate Handle Gasket is die-cut sponge rubber to authentic original dimensions.
Tailgate Latch Striker Bumper
p/n: 70-1911-87
This Tailgate Latch Striker Bumper is a quality reproduction of the original factory part. This rubber bumper attaches to the station wagon tailgate to cushion its closure. Usually requires two (2) bumpers each per vehicle.
Tailgate Lower Seal
p/n: 70-4010-85
This Tailgate Lower Seal is properly molded from originals for a factory like fit. The seal is installed using screws, which are included.
Tailgate run channel filler
p/n: 70-3302-87
Tailgate glass run channel, upper molded section, left and right. Molded piece with metal core ready to attach to tailgate window run channel.
Tailgate Side Seals
p/n: 70-4009-85
This Tailgate Side Seals includes right and left side with installation screws. These seals are properly molded from originals for a factory like fit.
Tailgate Weatherstrip
p/n: 70-3544-85
This Tailgate Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts to the tailgate opening, directly to the body, with properly spaced plastic clips. Includes molded ends that contain brass cores.
Tailgate Weatherstrip
p/n: 70-2402-85
This tailgate weatherstrip is designed from the original part for superior fitment and seal. The seal mounts on the sides and bottom of the tailgate.
Tailgate Weatherstrip
p/n: 82-0181-84
This tailgate weatherstrip is designed from the original part for superior fitment and seal. The seal mounts to the sides and bottom of the tailgate opening directly to the body. Includes molded ends.
Tailgate Weatherstrip
p/n: 70-3299-85
These tailgate weatherstrips are designed from the original part for superior fitment and seal. The seals mount to the sides and bottom of the tailgate opening directly to the body. Includes molded ends.
Tailgate Weatherstrip
p/n: 82-0182-84
This Tailgate Weatherstrip is designed from the original part for superior fitment and seal. The weatherstrip mounts to the sides and bottom of the tailgate opening directly to the body. Includes molded ends.
Tailgate Weatherstrips - Upper and Lower
p/n: 70-1794-72
This upper and lower Tailgate Weatherstrip pair is designed from the original part for superior fitment and seal. These weatherstrips work to provide a tight seal for the tailgate by protecting the body line gap between the tailgate and vehicle body.
Tailgate Window Felt Weatherstrip
p/n: 80-0294-57
Tailgate window horizontal seal. These strips wipe the tailgate window when the glass is lowered. They come ready to install with finished ends and body curvature bends.
Tailgate Window Outer Beltline Rubber Weatherstrip
p/n: 80-0793-57
This Tailgate Glass Outer (Only) Window Beltline Rubber Weatherstrip reproduction is designed from the original part for superior fitment and seal. This beltline molding mounts to the tailgate with tabs. This window rubber wipes the tailgate window glass when the glass is lowered.
Taillight Housing to Body Gasket
p/n: 20-2663-15
This Taillight to Body Gasket is designed from the original part for superior fitment and sealing. These thick mount type reproduction gaskets fit between taillight frame housing and the body.
Taillight Lens Gasket
p/n: 20-0747-15
Gaskets, taillight lens. Square type. Useage: 1967-72: F100-350 Trucks EXCEPT Style-side 1973-77: F100-250 series Flare-side pickups before Serial #020,000.
Taillight Lens Gasket
p/n: 20-0837-15
Gaskets, taillight lens. Rectangular type. For style-side trucks.
Taillight Lens Gaskets
p/n: 70-3240-15
This Taillight Lens Gasket pair is designed from the original part for superior fitment and seal. This reproduction gasket fits between taillight lens & taillight housing.
Taillight Lens Gaskets
p/n: 20-1015-15
This Taillight Lens Gasket pair is designed from the original part for superior fitment and seal. This reproduction gasket fits between the taillight lens and taillight housing. For all models except Station Wagons and Ranchero.
Taillight Lens Gaskets
p/n: 70-3989-15
This Taillight Lens Gasket pair is designed from the original part for superior fitment and seal. These reproduction gaskets fit between taillight lens & taillight housing.
Taillight Lens Gaskets - With Reflectors
p/n: 20-1013-15
This Taillight Lens Gasket pair is designed from the original part for superior fitment and seal. This reproduction gasket fits between the taillight lens and taillight housing. For vehicle models with reflectors.
Taillight Lens Gaskets - Without Reflectors
p/n: 20-1014-15
This Taillight Lens Gasket pair is designed from the original part for superior fitment and seal. This reproduction gasket fits between the taillight lens and taillight housing. For vehicle models WITHOUT reflectors.
Taillight to Body Gaskets
p/n: 20-1020-15
This Taillight to Body Gasket pair is designed from the original part for superior fitment and seal. These reproduction gaskets fit between taillight frame housing and the body.
Taillight to Body Gaskets - Without Reflectors
p/n: 20-1021-15
This Taillight to Body Gasket pair is designed from the original part for superior fitment and seal. These reproduction gaskets fit between taillight frame housing and the body. For Station Wagon and Ranchero models WITHOUT reflectors.
Three Door Weatherstrip Set - Glue-On
p/n: 70-4902-72
This Three Door Weatherstrip Set is designed from the original part for superior fitment and seal. This 3-piece set fits both front doors and the rear passenger side 3rd door. These weatherstrip mount (glue-on) directly to the body sealing the full perimeter of the doors against the truck body when the door is closed.
Three Door Weatherstrip Set - Push-On
p/n: 70-4903-72
This Three Door Weatherstrip Set is designed for a superior fitment and seal. This 3-piece set fits both front doors and the rear passenger side 3rd door. These weatherstrips mount on the pinchweld of the body to seal the full perimeter of the doors against the truck body when the door is closed.
Tie Rod Dust Covers
p/n: 20-2484-36
This Tie Rod Dust Cover, drag link seal, is sold as a four (4) piece set. The seals are designed from originals for proper fitment.
Torsion bar bushing
p/n: 20-0670-36
Bushing, front radius rod. Front and rear. Four (4) required per Truck.
Torsion bar bushing
p/n: 20-0667-36
Bushing, front axle pivot. Two (2) required per Truck. Twin I Beam suspension.
Traction Bar Bumper
p/n: 70-2293-35
This Traction Bar Bumper is designed from the original part for superior fitment and function. An excellent reproduction of part found on models with radius rod traction bars.
Transmission Filler Flaps
p/n: 70-3686-25
This Transmission Filler Flap pair is designed from the original part for superior fitment and seal. For Cutlass and 442 models with automatic transmission. Two (2) piece filler flap pair located where the frame meets the firewall on the right and left sides.
Transmission Mount
p/n: 20-0602-11
This Transmission Mount, rear engine mount, is made to original specifications for an authentic fit and appearance. Used for manual or automatic transmissions.
Transmission Mount
p/n: 70-2058-25
This Transmission Mount is a new aftermarket replacement mount manufactured to meet or exceed factory specifications.. One (1) required per vehicle.