M6-1.0 Anchor Set - GM Vehicles
p/n: 70-4867-46
A top-quality neoprene rubber Well Nut, Washer and Screw Anchor for GM vehicle models. Well nut has a metric M6-1.0 captive brass nut. Overall length is 21/32". Replaces GM factory number #20130258.
Hood and Fender Bumper
p/n: 70-3446-42
This Hood / Fender Bumper is a quality reproduction of the original factory part. This adjustable rubber bumper attaches to the front fender to support / cushion the hood closure.
Cowl Top Plug
p/n: 20-1813-20
This Cowl Top Plug is designed from the original part for an authentic fit, finish, and appearance. This plug installs in the access hole in cowl top.
Trunk Bumpers - Coupe or Convertible
p/n: 70-4732-87
This Trunk Bumper pair is a quality reproduction of the original factory part. These dense rubber bumpers attach to the vehicle body to support / cushion the trunk lid closure.
Hood Bumper
p/n: 70-2735-42
This adjustable Hood Bumper mounts at the front of the vehicle over the radiator. 1.0 x 44mm thread with 23mm hex head.
Trunk Bumper
p/n: 70-2741-87
Bumpers, adjustable trunk. Screws into trunk. Two (2) required per car.
Liftgate Upper Edge Weatherstrip
p/n: 70-4139-85
This Liftgate Upper Edge Weatherstrip seal is designed from the original part for superior fitment and seal. This weatherstrip mounts on the liftgate and seals the upper edge.
Trunk Hinge Gaskets - Convertible
p/n: 70-4657-87
This Trunk Hinge Gasket pair is designed from the original part for superior fitment, finish and function. On Convertibles the gasket pair install between the plastic hinge cover and the trunk lid on the exterior (near the rear window).
Wiper Cowl Weatherstrips
p/n: 70-4882-43
This Wiper Cowl Weatherstrip pair is designed from the original part for superior fitment and seal. This is the rear outer wiper cowl pair. These weatherstrips sit behind the hood to cowl primary weatherstrip by the left-side and right-side hood hinges.
Clutch or Brake Pedal Pad
p/n: 20-0848-22
This reproduction Clutch and/or Brake Pedal Pad slips over the full perimeter of the pedal for a precise, factory fit. A perfect reproduction to replace worn original pedal pads. Manufactured in quality black rubber.
F-150 Brake OR Clutch Pedal Pad
p/n: 70-4486-22
This reproduction F-150 Brake OR Clutch Pedal Pad slips over the full perimeter of the brake or clutch pedal for a precise, factory fit. Replaces original brake or manual transmission clutch pedal pads.
Hood To Cowl Weatherstrip
p/n: 70-4897-43
This Hood To Cowl Weatherstrip is designed from the original part for superior fitment and seal. An exact reproduction of the original profile. This weatherstrip installs at the rear of the engine bay to seal between the hood and vehicle body cowl.
Bronco Script Brake Pedal Pad, Automatic
p/n: 70-4481-22
This reproduction Brake Pedal Pad slips over the full perimeter of the brake pedal for a precise, factory fit. Replaces original brake pedal pad for automatic transmissions with power brakes.
Rear Hatch Door Bumpers
p/n: 70-4731-87
This Rear Hatch Door Bumper pair is a quality reproduction of the original factory part. These adjustable rubber bumpers attach to the rear hatch door to prevent the hatch lid from vibrating.
Rear Hatchback Door Window Glass Weatherstrip
p/n: 70-4826-81
This Rear Hatchback Door Window Glass Weatherstrip is designed from the original part for superior fitment and seal. A reproduction of edge channel that surrounds the metal edge were the rear hatch window glass touches the hatch door.
F-150 Brake Pedal Pad, Automatic
p/n: 70-4487-22
This reproduction F-150 Brake Pedal Pad slips over the full perimeter of the brake pedal for a precise, factory fit. Replaces original brake pedal pads for automatic transmissions.
Windshield Upper Reveal Molding
p/n: 70-4291-52
This Windshield Upper Reveal Molding is designed from the original part for superior fitment. This part fits across the top of the windshield. The part is made with top quality materials and with the proper molding profile for an exact fit and finish.
Door On Body Weatherstrip - Left or Right
p/n: 70-4888-73
This Door On Body Weatherstrip is designed from the original part for superior fitment and seal. This peel-n-stick weatherstrip easily installs on the Body and fits either the driver or passenger doors.
Brake Pedal Pad
p/n: 70-4590-22
This reproduction Pedal Pad slips over the full perimeter of the brake pedal for a precise, factory fit. Replaces original brake pedal pads. Detailed and finished to match the original appearance.
Upper Door Weatherstrip - Left or Right
p/n: 70-4879-73
This Upper Door Weatherstrip is made from high-quality ozone-resistant PVC rubber. This single piece weatherstrip is installed by pressing it onto the upper part of the cab opening for 2-Door Standard and Extended Cab Pickup Trucks.
Stabilizer Bar End Link Set
p/n: 60-0221-33
Twenty-two (22) piece Stabilizer Bar End Link set for both sides of one (1) vehicle, fits front or rear bar. Order two (2) sets for vehicles with front and rear stabilizer bars. Hex head bolt 3/8"-16 NF x 6-15/16" long. Comes with metal sleeve, metal cup washers and rubber grommets.
Convertible Top Latch Catches and Guides Set
p/n: 70-4655-67
This Convertible Top Latch Catches and Guides Set is an important maintenance piece on Mustang and Cobra models with a convertible top. Replace your cracked j-hook and broken dowel pin receptacles with this quality reproduction four (4) piece set.
Front Inner Fender to Hood Weatherstrip
p/n: 82-0159-45
A Front Inner Fender To Hood Weatherstrip made with the proper cross section of rubber like the original for durability and a like factory seal. Fits over the inner fender panel and seals to hood assembly. Sold individually, two (2) per vehicle required.
Convertible and T-Top Retainer Weatherstrip
p/n: 20-2805-67
This Convertible and T-Top Retainer Weatherstrip fits between the body and the metal retainer that holds the weatherstrip in place. One (1) roll per vehicle.
Removable Top Front Weatherstrip - On Fiberglass Roof
p/n: 70-2999-68
This Removable Top Front Weatherstrip is designed from the original part for superior fitment and sealing. This weatherstrip installs directly on the front of the fiberglass roof shell with weatherstrip adhesive glue (not included) and presses against the metal roof cab weatherstrip.
Cobra Clutch and Brake Pedal Pads
p/n: 70-4201-22
This reproduction Cobra Clutch and Pedal Pad pair mounts around the full perimeter of the brake and clutch pedals for a precise, factory fit. Replaces original pedal pads. Manufactured with a thick, quality rubber construction and an embossed striking Cobra emblem on each pad.
Window Locking Strip - Black
p/n: 70-2195-52
This extruded Locking Strip is used to retain windshield gaskets in pickups and vans. Designed from the original part for superior fitment, finish and function. Available in 16ft lengths.
Door Weatherstrip - Left or Right
p/n: 70-4887-73
This Door Weatherstrip is designed from the original part for superior fitment and seal. This peel-n-stick weatherstrip easily installs on the Door and fits either the driver or passenger doors.
Door Weatherstrip End Caps
p/n: 70-4659-73
This Door Weatherstrip End Cap pair is designed from the original part for superior fitment and seal. Left and Right End Caps mount on the end of the door weatherstripping, near the quarter windows on convertible models.
Windshield Trim To Glass Weatherstrips - Convertible
p/n: 70-4660-52
This Windshield Trim To Glass Weatherstrip pair for convertibles is designed from the original part for superior fitment, finish and function. These LH and RH windshield trim weatherstrips go between the windshield and the windshield molding.
Rear Cargo Door Upper Weatherstrip
p/n: 70-4703-73
This Rear Cargo Door Upper Weatherstrip is designed from the original part for superior fitment and seal. Push-on type door weatherstrip mounts on the upper portion of the body and seals against the closed cargo doors.
Removable Top Front Weatherstrip - On Metal Cab Roof
p/n: 70-3000-68
This Removable Top Front Weatherstrip is designed from the original part for superior fitment and sealing. This part fits on the rear of the metal cab roof and seals against the removable fiberglass top when the top is placed on the vehicle.
Engine Top Cover Weatherstrip
p/n: 70-4750-88
This Engine Top Cover Gasket is an original design reproduction made from top quality sponge rubber. This gasket attaches between the removable engine cover ("doghouse") and the vehicle firewall / floorboard.
Top of Door Weatherstrips - Roof Rail
p/n: 70-4022-73
This Top of Door Weatherstrip - Roof Rail pair for the left and right side doors seal the door window frame to the roof hardtop and to the windshield frame.
Body Plug Set
p/n: 70-4648-20
This thirty (30) piece Body Plug set is designed from the original parts for superior fitment and sealing. Made from high quality EPDM dense rubber, this set replaces dried, broken, and missing body plugs.
Firewall to Hood Weatherstrip
p/n: 70-4200-43
This Firewall to Hood Weatherstrip is designed from the original part for superior fitment and seal. This seal has the proper cowl radius to fit correctly. Mounts with ten (10) pre-installed clips at the rear of the engine bay directly to the body.
Hood to Cowl Weatherstrip
p/n: 70-3448-42
This Hood to Cowl weatherstrip is for superior fitment and sealing. This extruded sponge rubber clinch seal strip mounts at the rear of the engine bay directly to the body on the cowl lip.
Hood to Cowl Weatherstrip
p/n: 70-4533-43
This Hood To Cowl Weatherstrip is designed from the original part for superior fitment and seal. This weatherstrip mounts at the rear of the engine bay to seal between the hood and vehicle body cowl.
Upper Door Weatherstrip - Left or Right
p/n: 70-4880-73
This Upper Door Weatherstrip is made from high-quality ozone-resistant PVC rubber. This single piece weatherstrip is installed onto the A-pillar, spanning along the upper section of the cab opening and extending down the rear side door of the 4-door trucks.
Trunk Weatherstrip
p/n: 20-2865-84
This Trunk Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.
Push-Out Window Weatherstrip
p/n: 70-4751-76
This Push-Out Window Weatherstrip is designed from the original part for superior fitment, appearance and seal. This window weatherstrip fits to the body around the window opening to seal the push out window when closed.
Liftgate Weatherstrip
p/n: 70-4122-85
This Liftgate Weatherstrip seal is designed from the original part for superior fitment and seal. The push-on style weatherstrip mounts on the upper portion of the body on liftgate models.
Chrome Mylar Locking Strip
p/n: 70-3425-52
This Chrome Mylar Locking Strip inserts into the weatherstrip to lock in the glass for the rear window. The strip is designed to be installed during glass replacement.
Glass Run Channel - Right Hand
p/n: 70-4516-58
This Glass Run Channel presses into the door channel where the door glass rolls up into. Reproduction weatherstrip is made to OEM specifications for a precise, factory like fit.
Glass Run Channel - Left Hand
p/n: 70-4515-58
This Glass Run Channel presses into the door channel where the door glass rolls up into. Reproduction weatherstrip is made to OEM specifications for a precise, factory like fit.