Convertible Front Bow Weatherstrip
p/n: 82-0161-64
This convertible top Front Bow Weatherstrip is designed from the original part for superior fitment and seal. This seal installs directly to the convertible top to seal between the soft top and the top of the windshield frame.
Cornering Light Lens Gaskets
p/n: 70-3098-17
This Cornering Light Lens Gasket pair is designed from the original part for superior fitment and seal. These quality reproduction gaskets fit between the cornering light lens and the cornering light housing or bezel.
Directional and Parking Light Lens Gaskets
p/n: 70-3095-16
This Directional Turn Signal and Parking Light Lens Gasket pair is designed from the original part for superior fitment and seal. This reproduction gasket fits between the Signal / Parking Light Lens and the Signal / Parking Light Housing or Bezel.
Door Handle Gasket Set
p/n: 70-3215-69
This four (4) piece Door Handle Gasket Set is designed from the original part for superior fitment and seal. Gaskets are precision die cut to the original specifications. This set is for two (2) door handles.
Electrical Panel Cover Gasket
p/n: 70-4474-31
This Electrical Panel Cover gasket is designed from original parts for superior fitment and sealing. This quality manufactured gasket is for the electrical panel cover at the Right Hand kick panel.
Stabilizer Bar End Link Repair Set
p/n: 20-1068-33
This eleven (11) piece Stabilizer Bar End Link Repair Set is designed to withstand harsh conditions without deteriorating. Two (2) end link sets required per car.
Taillight Assembly Mounting Pads
p/n: 70-3777-15
This Taillight Assembly Mounting Pad pair is designed from the original part for superior fitment and seal. These reproduction gaskets fit between the taillight assembly and the vehicle body.
Cowl Vent Gasket
p/n: 60-0601-54
Side cowl vent seal. One eighth (1/8) inch thick high quality sponge design.Length: 8.50 inches. Width: 5.375 inches.
Taillight Lens Gaskets - In Bumper
p/n: 70-3089-15
This Taillight Lens Gasket pair is designed from the original part for superior fitment and seal. This reproduction gasket fits between the outer taillight lens & taillight housing in bumper.
Directional or Back Up Light Lens Gaskets
p/n: 70-3776-16
This Directional Turn Signal or Back Up Light Lens Gasket pair is designed from the original part for superior fitment and seal. This reproduction gasket fits between the Light Lens and the Light Housing or Bezel.
Door To Window Seals
p/n: 20-2835-79
This Back of Door To Window seals pair is designed from the original part for superior fitment and sealing. These seals are located on the rear edge of the front door to window. Seals may also be known as a door jamb seals.
Radiator Support To Hood Weatherstrip
p/n: 20-2748-42
This Radiator Support To Hood Weatherstrip is designed from the original part for superior fitment and seal. This rubber weatherstrip fits at the front of the vehicle to seal between the radiator and the hood when hood is closed. Includes OE type staples to install.
Air Cleaner Lid Gasket
p/n: 20-2701-20
This Air Cleaner Lid gasket is designed from the original part for superior fitment and sealing. This cut-to-fit gasket glues to the air cleaner lid to seal between the lid and air filter element housing. This gasket is for Six (6) Cylinder engine models.
Air Cleaner Lid Gasket
p/n: 20-2699-20
This Air Cleaner Lid gasket is designed from the original part for superior fitment and sealing. This cut-to-fit gasket glues to the air cleaner lid to seal between the lid and air filter element housing. This gasket is for 289-302 V8 engine models.
Door Glass Run Channel
p/n: 70-4313-58
This Door Glass Run Channel is designed from the original part for superior fitment and seal. The window glass run channel presses into the door channel at the top and back part of the door. This single piece fits either the driver (LH) OR the passenger (RH) side front door.
Body Mounting Pad
p/n: 70-2165-48
Pad, body mount, lower bolt retaining. Rubber with metal washer molded in. Used on the bottom of most mounting locations.
Hood Bumper
p/n: 82-0212-42
Bumper, hood to fender ledge. Excellent reproduction, made just like original.
Radiator bracket cushion
p/n: 70-2555-31
Cushions, radiator support, lower. Fully molded, specially designed to duplicate original part.
Rear Door at Hinge Seal Set
p/n: 70-3297-73
This four (4) piece Rear Door Hinge Seal Set is made to original specifications for proper fitment. Seals are precision die cut from top quality rubber to ensure durability and proper seal. Installs with glue to rear door where hinge arm goes into door.
Vent Window Rebuild Set
p/n: 70-4801-70
This Vent Window Rebuild Set includes glass setting tape (1/16 thick), hinge pivot step rivet pair, and a rivet peening punch. The set has enough materials for both the passenger side and driver side vent window assemblies.
Brake or Clutch Pedal Pad
p/n: 20-0177-22
Brake or Clutch Pedal Pad - Four (4) inches long by two and three eights (2-3/8) inches long outside to outside measurements.
Finish Panel to Package Tray Weatherstrip
p/n: 70-3874-87
This Rear Finish Panel to Package Tray Weatherstrip attaches to the trunk body and seals between the finish panel and the package tray near the convertible top when closed.
Front Suspension Bumper
p/n: 20-0080-32
Bumper for front suspension upper arm. Measures three eighths (3/8) inch by sixteen (16) by eleven sixteenths with (11/16) inch bolt thread.
Rear Bumper Trim Welts
p/n: 70-4092-45
This pair of Quarter Panel to Rear Bumper End Trim Welts are designed from the originals for superior fitment and seal. These welt strips mount to the rear quarter panel bumper end piece, with one per vehicle side.
Axle Rebound Pad
p/n: 20-2729-32
Bumper, outer rear axle. Mounts on frame rail. Push in type. Two (2) required per car.
Hood Bumper
p/n: 70-0770-42
Bumper, fender to hood. Correct detail with ridges as original. Four (4) required per car.Length: 1.3125 inches.
Hood Bumper
p/n: 20-0207-42
Bumper, hood on fender. Push-in type. Three fourths (3/4) inch wide. Four (4) piece set.
Rear Bumper Arm Seal
p/n: 20-0234-47
This four (4) piece Rear Bumper Arm Seal set installs between the body and rear bumper. A reproduction designed from original part so it fits correctly.
Torsion bar bushing
p/n: 20-0670-36
Bushing, front radius rod. Front and rear. Four (4) required per Truck.
Steering Column Seal
p/n: 70-1462-36
Seal, steering column to steering box. For four (4) speed transmissions.
Splash Apron / A-Arm Dust Shield Filler
p/n: 70-3069-45
This two (2) piece Splash Apron / A-Arm Dust Shield Filler pair is designed from the original part for superior fitment and seal. Filler pieces are die cut from quality masticated rubber to authentic original dimensions. Left and Right pieces fit over suspension a-arms and inside front inner fenders.
Brake Pedal Pad - Automatic
p/n: 60-0710-22
This reproduction Brake Pedal Pad slips over the full perimeter of the brake pedal for a precise, factory fit. A direct fit to replace worn, heavy wear original brake pedal pads. For GM models with an automatic transmission.
Convertible Top Weatherstrip Fastener Set
p/n: 70-4759-67
This sixteen (16) piece Convertible Top Weatherstrip Fastener Set is designed from the original part for superior fitment, finish and function. An exact copy of originals. The set includes 16 zinc plated special tube nuts and 16 special washers.
Exhaust Tailpipe Hanger Strap
p/n: 60-0308-13
This Exhaust Tailpipe Hanger Strap is made from high-quality rubber for a precise, factory like fit for your classic vehicle. Muffler/tailpipe system, reproduction strap type is manufactured to OEM specifications.
Heater Core Housing Gasket
p/n: 70-4469-31
This Heater Core Housing gasket is designed from original parts for superior fitment and sealing. This quality manufactured gasket fits to seal the heater core to the heater core housing.
Hood To Fender Bumper Set
p/n: 20-1313-42
This four (4) piece Hood to Fender Bumper set is a quality reproduction of the original factory part. These rubber bumpers attaches to the front fender to support / cushion the hood closure.
Steering Column At Floor Seal
p/n: 70-3692-36
This Steering Column At Floor Seal is designed from the original part for superior fitment and sealing. Seal part is die cut from quality masticated rubber to authentic original dimensions. This part fits around the steering column to seal the column through the body floor pan.
Tie Rod Dust Covers
p/n: 20-2484-36
This Tie Rod Dust Cover, drag link seal, is sold as a four (4) piece set. The seals are designed from originals for proper fitment.
Folding seat bumper
p/n: 20-2885-88
Bumpers, fastback fold down rear seat to floor stop. Type with screws.
Vent division bar weatherstrip
p/n: 20-2782-56
Front vent window division post seal. Fully molded with metal core and attaching tabs.
Hood Bumper
p/n: 27-0098-42
Bumper, hood front to radiator ledge, adjustable. Includes plated bolt and rubber cushion.Length: 2.1875 inches.
Parking Light Lens Gaskets
p/n: 20-1023-16
This Parking Light Lens Gasket pair is designed from the original part for superior fitment and seal. This reproduction gasket fits between the Parking Light Lens and the Parking Light Housing or Bezel.
F-100 Brake OR Clutch Pedal Pad
p/n: 70-4484-22
This reproduction F-100 script Brake OR Clutch Pedal Pad slips over the full perimeter of the brake or clutch pedal for a precise, factory fit. Replaces original brake or manual transmission clutch pedal pads.
Front Stabilizer Bar End Link Set
p/n: 20-0037-33
This eleven (11) piece Front Stabilizer Bar End Link Set is designed from original parts so it fits correctly. Two (2) kits / sets required per car as one (1) kit / set services one side of front stabilizer bar.
Fuel Filler Neck Grommet
p/n: 20-0585-39
This Fuel Filler Neck Grommet is designed from the original part for superior fitment and seal. This grommet fits around the vehicles fuel filler neck between the filler neck and vehicle body.
Hood Bumper
p/n: 70-0907-42
Bumper, hood front aligning. Correct design with proper screw thread.Height: 2.50 inches.
Rear View Mirror Mounting Pad
p/n: 70-2791-70
This single Rear View Mirror Mounting Pad To Door gasket is designed from the original part for superior fitment and seal. The gasket is precision die cut to the original specifications. This gasket is one (1) door mounted rear view mirror.
Transmission Mount
p/n: 70-2058-25
This Transmission Mount is a new aftermarket replacement mount manufactured to meet or exceed factory specifications.. One (1) required per vehicle.
Accelerator Pedal Rod Grommet
p/n: 20-0044-41
This Accelerator Pedal Rod Grommet is used to wrap around the accelerator rod at the firewall. Designed from the original part for superior fit and seal.
Hood Bumper
p/n: 20-0209-42
Bumper, hood on rear of fender. Rubber button tip only. Two (2) piece set.
Firewall to Hood Weatherstrip
p/n: 20-2749-42
This Firewall To Hood Weatherstrip is designed from the original part for superior fitment and seal. This seal mounts at the rear of the engine bay directly to the body. Includes attaching clips pre-installed.
Adjustable Hood Bumper
p/n: 70-2830-42
This Adjustable Hood Bumper is a quality reproduction of the original factory part. This rubber bumper attaches to the front fender to support / cushion the hood closure. Usually requires three (3) per vehicle.
Clutch and Brake Pedal Bump Stops
p/n: 70-4805-24
This Clutch and Brake Pedal Bump Stop pair is designed from the original part for superior fitment, finish and function. These rubber bumpers help align your brake and clutch pedals in the correct position, while also preventing rattles and squeaks.
Clutch or Brake Pedal Pad
p/n: 20-0848-22
This reproduction Clutch and/or Brake Pedal Pad slips over the full perimeter of the pedal for a precise, factory fit. A perfect reproduction to replace worn original pedal pads. Manufactured in quality black rubber.
Dimmer Switch Grommet
p/n: 40-0083-88
This Dimmer Switch Grommet is used during carpet installations in automotive restorations. Made from high-quality EPDM dense rubber to provide excellent durability. Includes a wide flange for floor dimmer switch fitments.