Door Bumper
p/n: 30-0002-71
Bumper, door side. One and one fourth (1-1/4) inch by two (2) inch.Length: 2.0 inches. Width: 1.25 inches.
Door Bumper
p/n: 70-3035-71
This Door Bumper is designed from the original part and attaches to door with single screw. Typically requires two (2) or four (4) bumpers per vehicle depending on the vehicles year of manufacture.
Door Bumper
p/n: 70-1156-71
Door Side Bumper made from EPDM Dense rubber. Clip retained. Appears identical to Atwood #107, #208. Width: 1-1/2" inches. Height: 1-5/16"
Door Bumper - Lower
p/n: 70-3308-71
This Lower Door Bumper is designed from the original part for superior fitment and function. Bumper pushes into slot on door at bottom.
Door Bumper, Upper / Lower
p/n: 20-2825-71
This Door Bumper is a quality reproduction of the original factory part. Upper / Lower push-in type. Four (4) required per car.
Door drain hole seal
p/n: 70-3034-70
Seal, door inner panel drain. Attaches to bottom of door with one (1) carrot retainer on either end.
Door Filler Caps
p/n: 70-4637-70
This convertible model Door Filler Cap pair is designed from the original part for an authentic fit, finish, and function. These door fillers cap the top of the half-post between the front and rear doors on convertible models.
Door Handle Gasket Set
p/n: 70-3036-69
This Door Handle Gasket Set is designed from the original part for superior fitment and seal. One (1) gasket set will do either front or rear two (2) doors.
Door Hinge Bumper Set
p/n: 70-4871-71
This Door Hinge Bumper Set is a quality reproduction of the original factory part. These sixteen (16) rubber bumpers attach four (4) per door to cushion the door closure action.
Door Hinge Seal Set
p/n: 70-4643-73
This four (4) piece Door Hinge Seal Set is made to original specifications for proper fitment. Seals are precision die-cut from top quality rubber to ensure durability and proper seal. Four (4) piece set seals two (2) front or rear doors.
Door Lock Pillar Filler
p/n: 70-3664-79
This convertible Door Lock Pillar Filler is designed from the original part for superior fitment and sealing. This part seals the bottom of the rear side window and may also be known as a door jamb seal.
Door or Side Window Weatherstrip
p/n: 30-0147-73
This quality dense rubber weatherstrip works as a Door Weatherstrip on certain Packard models with Dietrich closed bodies or as a Side Window Weatherstrip on certain Ford-Lincoln K models with Coachmaker bodies. Available by the foot.
Door Weatherstrip
p/n: 70-2719-73
This Door Weatherstrip seals the upper door at the drip rail. It attaches to the body of the car. Located on A-post and continues across roof line and down the B-post.
Door Weatherstrip
p/n: 70-3272-72
Door edge weatherstrip. This part is the primary door to body weatherstrip.
Door Weatherstrip
p/n: 70-2718-73
This Door Weatherstrip pair is designed from the original parts for superior fitment and seal. These primary front door weatherstrips push-on like original to seal the driver and passenger doors when closed.
Door Weatherstrip
p/n: 14-0020-70
Weatherstrip, door "plateau", to seal and shunt water to drain. Made with metal core and correct mounting holes.Length: 10.0 inches.
Door Weatherstrip - Rear Door Striker Seal
p/n: 70-3296-73
This Rear Door Lock Striker Weatherstrip attaches to the front edge of rear suicide door to seal the gap where the front and rear doors meet. The seal has a brass metal core the full length of part.
Door Weatherstrips - Rear Door Striker
p/n: 70-3799-73
This Rear Door Striker Door Weatherstrip pair attaches to the front edge of rear suicide door to seal the gap where the front and rear doors meet. A premium quality part with a corrosion resistant brass metal core the full length of part.
Door Weatherstrips - Rear Door Striker
p/n: 70-3031-73
This Rear Door Lock Striker Weatherstrip pair attaches to the front edge of rear suicide door to seal the gap where the front and rear doors meet. The weatherstrip has a brass metal core the full length of part.
Electrical Panel Cover Gasket
p/n: 70-4474-31
This Electrical Panel Cover gasket is designed from original parts for superior fitment and sealing. This quality manufactured gasket is for the electrical panel cover at the Right Hand kick panel.
Fender Skirt Edge Weatherstrip
p/n: 20-0111-44
This Fender Skirt Edge Weatherstrip pair is designed from the original part for superior fitment, finish and sealing function. Two five (5) foot strips that fit between the rear wheel fender skirt and rear quarter panel.
Finish Panel To Package Tray Weatherstrip
p/n: 70-3874-87
This Rear Finish Panel to Package Tray Weatherstrip attaches to the trunk body and seals between the finish panel and the package tray near the convertible top when closed.
Firewall To Hood Weatherstrip Set
p/n: 70-2873-43
This Firewall To Hood Weatherstrip Set is designed from the original part for superior fitment and seal. An exact reproduction of the original profile. This weatherstrip set installs at the rear of the engine bay to seal between the closing hood and the vehicle firewall.
Front Body Upper Pillar Drain Trough
p/n: 70-4212-73
This Front Body Upper Pillar Drain Trough pair is designed from the original part for superior fitment and seal. This left (LH) and right (RH) drain trough pair fits above the front upper door hinge, one per side.
Front Bow Weatherstrip
p/n: 70-3659-64
This Front Bow Weatherstrip provides the seal between the convertible top and the top of the windshield. The piece is designed from the original part for superior fitment and seal.
Front Bow Weatherstrip
p/n: 70-4088-64
This Front Bow Weatherstrip is designed from the original part for superior fitment and seal. This header weatherstrip installs directly to the convertible top to seal between the soft top and the top of the windshield.
Front Bow Weatherstrip
p/n: 70-3646-64
This convertible Front Bow Weatherstrip is designed from the original part for superior fitment and seal. Weatherstrip installs at the windshield header bow to convertible top.
Front Door Edge Weatherstrips
p/n: 70-3030-73
This Front Door Edge Weatherstrip pair is designed from the original part for superior fitment and seal. These edge weatherstrips attach to the front edge of the front door. Part is fully molded with a corrosion resistant brass metal core.
Front Door Roof Rail Weatherstrips
p/n: 70-4146-68
This Front Door Roof Rail Weatherstrip pair is made of ozone resistant EPDM dense rubber to the original design. Weatherstrips have molded ends which provides for a factory like fit. These high-quality weatherstrips fit on the front roof of the vehicle and work to seal the side windows when the window is fully raised.
Front Door Vent Window Upper Bumpers
p/n: 70-4794-62
This Front Door Vent Window Upper Stop Bumper pair is designed from the original part for superior fitment and function. Fits at the top of the front door vent window frame. Fully molded over a brass metal core.
Front Door Vent Window Upper Bumpers
p/n: 70-4662-62
This Front Door Vent Window Upper Stop Bumper pair is designed from the original part for superior fitment and function. Fits at the top of the front door vent window frame. Fully molded over a brass metal core.
Front Door Vent Window Weatherstrips
p/n: 14-0011-55
These Front Door Vent Window Weatherstrips are designed from the original parts for a precise, factory fit. They are molded as left and right and have the correctly placed, pre-drilled pivot holes. This version has the notch for the locking lever.
Front Door Vent Window Weatherstrips
p/n: 14-0017-55
These Front Door Vent Window Weatherstrips are molded as left and right and have the correctly placed, pre-drilled pivot holes. This version does not have the notch for the locking lever.
Front Door Vent Window Weatherstrips
p/n: 70-4285-55
This Front Door Vent Window Weatherstrip pair is designed from the original parts for superior fitment and sealing. This two (2) piece pair is fully molded as driver (Left) side and passenger (Right) side front door vent / wing window weatherstrips.
Front Door Vent Window Weatherstrips
p/n: 70-2832-55
These front door vent window seals are designed from the original parts for superior fitment and seal. The pieces are molded as left and right and are one piece with the division post seal.
Front Door Weatherstrip
p/n: 70-2870-72
Door edge weatherstrip. This part is the primary door to body weatherstrip.
Front Door Weatherstrips
p/n: 70-3282-72
This Front Door Weatherstrip is the primary door to body weatherstrip. Complete with molded ends that contain brass cores for strength and extra-long life. Includes accurately installed pins for easy installation.
Front Door Weatherstrips
p/n: 70-4642-72
This Front Door Weatherstrip pair is designed from the original part for superior fitment and seal. Push-on pin type door weatherstrips mount directly to the left and right front doors to seal against the vehicle body when closed.
Front Door Weatherstrips
p/n: 70-3029-72
This Front Door Weatherstrip pair is the primary door to body weatherstrip. Complete with molded ends that contain brass cores for strength and extra-long life. Includes accurately installed pins for easy installation.
Front Door Weatherstrips
p/n: 70-4181-72
This Front Door Weatherstrip pair is designed from the original parts for superior fitment and seal. These two (2) primary door seals mount directly to the left and right front doors sealing the side and bottom perimeter of the door against the vehicle body when the door is closed.
Front Door Weatherstrips
p/n: 70-4691-72
This Front Door Weatherstrip pair is designed from the original part for superior fitment and seal. These primary door weatherstrips mount (pin-on) directly to the left and right doors sealing the doors against the vehicle body when closed.
Front Fender To Fender Apron Dust Shields
p/n: 70-4462-44
This Front Fender To Fender Apron Dust Shield pair is designed from the original part for superior fitment and use. Left and Right shield pieces function as front fender apron upper reinforcement to fender seals.
Front Hood Corner Pads
p/n: 14-0035-42
This Front Hood Corner Pad pair is an exact copy of the original. This pad fits between the engine hood and the body to isolate noise and vibration.
Front Suspension Lower Control Arm Bumper
p/n: 20-0202-32
This Front Suspension Lower Control Arm Bumper is designed from the original part for superior fitment, finish, and function. This suspension bumper mounts to the front lower control arm to prevent metal to metal contact.
Hardtop Roof Rail Weatherstrips
p/n: 70-2869-68
This Hardtop Roof Rail Weatherstrip pair fits on the roof of the vehicle and seals the side window when the window is fully raised.
Hardtop Roof Rail Weatherstrips
p/n: 70-3271-68
This Hardtop Roof Rail Weatherstrip pair is made of ozone resistant EPDM sponge rubber with molded A pillar ends and corners for a factory like fit. These high-quality weatherstrips fit on the roof of the vehicle and work to seal the side windows when the window is fully raised.
Hardtop Roof Rail Weatherstrips
p/n: 70-4832-68
This Hardtop Roof Rail Weatherstrip pair is made of ozone resistant EPDM sponge rubber with molded A pillar ends and corners for a factory like fit. These high-quality weatherstrips fit on the roof of the vehicle and work to seal the side windows when the window is fully raised.
Hardtop Roof Rail Weatherstrips
p/n: 70-4714-68
This Hardtop Roof Rail Weatherstrip pair is made of ozone resistant EPDM sponge rubber with fully molded ends and brass cores for a factory like fit. These high-quality weatherstrips fit on the roof of the vehicle and work to seal the side windows when the window is fully raised.
Heater and A/C Gasket Set - 23 Piece
p/n: 70-4468-31
This comprehensive twenty-three (23) piece Heater and Air Conditioning gasket set is designed from the original parts for superior fitment and sealing. Restore the effective heating and cooling operation of your vehicle's cabin air system with this quality manufactured gasket set.
Heater Core Gasket Set
p/n: 70-4471-31
This three (3) piece Heater Core Gasket set is designed from original parts for superior fitment and sealing. This quality manufactured set includes the gasket for the perimeter of the heater core and two (2) round insulators.