Please click on the part name in red in order to get a complete description.
Dust seals, rear fender at rear door, right and left.
Step pad, rumbleseat upper, with "P" logo. Fully molded with core and mounting stud.Height: .625 inches.
Step, rumbleseat fender with molded-in studs.Length: 6.375 inches.
Anti-squeak, front body-to fender, right and left.Length: 22.0 inches.
Cushion strip, front fender to runningboard, close reproduction.Length: 17.75 inches.
Grommets, front splash apron crossbar.Width: 3.5 inches. Height: 3.5 inches.
Grommets, front splash apron crossbar.Width: 3.5 inches. Height: 3.6875 inches.
Seal, runningboard to rear quarter panel special.
Mounting pads, rear fender crown molding. Requires two (2) per car.Length: 40.625 inches.
Liners, front fender to runningboard. Reversible right and left like originalLength: 15.0 inches.
Anti-squeak or welt radiator shell to fender.Length: 11.25 inches.
Liner, front fender to runningboard. Reversible right and left replacement.Length: 15.50 inches.
Grommets, front apron crossbar. Molded left and right just like original.Length: 3.625 inches. Width: 3.625 inches.
Pad, rumbleseat step, with "Dodge" logo, slip over type to fit old steel core. Perfect detail and lettering.Height: .50 inches.
Grommet (mounting pad), rear, trunk rack to apron.Length: 6.0 inches.
Pad, rumbleseat step bears Chrysler medallion logo in center.Height: .50 inches.
Seal, fender skirt edge.Length: 60.0 inches. Width: .625 inches.
Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide. One fourth (1/4) inch bead, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five
Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide, three sixteenths (3/16) inch, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty fi
Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five (25) foot roll see #70-1101-44.
Fenderskirt Edge Seal - Two (2) strips six (6) feet long. Length: 72.0 inches. Width: 0.375 inches.
Seal, fenderskirt edge. Each five (5) foot long. Similar to our #20-0111-44, but thicker.Length: 60.0 inches. Width: .25 inches.
Seal, fender skirt. Two 5 foot lengths of extrusion.Length: 60. inches. Width: .9375 inches.
Liner, front fender to radiator shell.Length: 6.50 inches.
Pad, rumbleseat step, with "DS" logo. Fits old bracket and bezel. See our #40-0055-44 also.Height: .50 inches.
Pad, rumbleseat step slip over style for original core, "DB" logo.
Pad, mounting, boot scraper-to-front fender, right and left.Width: 3.25 inches.
Seal, fenderskirt edge, exact copy, trim notch for skirt lock at installation. Compare sketch with your original to be sure. Two (2), five (5) foot strips.
Seal, fenderskirt. Two 5 foot lengths of extrusion.Length: 60.0 inches. Width: .625 inches.
Seal, fenderskirt edge. Good quality and workmanship, see sketch for comparison. Ten (10) foot strip.Length: 120.0 inches. Width: .1875 inches.
Pad, rumbleseat step, with "DeSoto" logo, full slipover type to fit old carcass and outer trim ring. See also our #40-0353-44.Height: .50 inches.
Sealing strip, fenderskirt edge. Two (2) strips approximately fifty (50) inches long for both sides of car. Original profile and appearance.
Seal, fender skirt (rear).
Cover, rear apron over fuel tank. 3-1/2 inch diameter hollow cup to cover hole above fuel gauge sending unit.
Pad, fenderskirt edge, similar to our #70-0055-45, but thinner. Approximately five (5) foot strip per skirt.Length: 60.0 inches. Width: .15625 inches.
Pad, wheel shield. Closely copied from original for perfect fit. Ten (10) foot strip, sufficient for one (1) car.Length: 120.0 inches. Height: .75 inches.
Seal, wheel streamliner (fenderskirt) to fender. Two (2) strips each cut five (5) foot long.Length: 60.0 inches. Width: .625 inches.
Pads, rumbleseat step.
Sealing strip, fenderskirt to body. Two extruded rubber strips fifty one (51) inches long matching original profile.Length: 51.0 inches. Width: .375 inches.
Pad (anti-squeak), front fender to radiator shell.Length: 8.4375 inches.
Seal, fenderskirt edge. Exact original profile. Two strips four (4) feet long.
Seal, front fender to rocker panel.Length: 3.875 inches.
Seal, fenderskirt edge. Exact original profile. Two (2) strips four (4) feet long.Height: 1.0 inches.
Pad, rumbleseat step, with "P" logo, fully detailed slipover pad for old core. Fits original trim ring.Height: .50 inches.
Sealing strip, fenderskirt edge to body. Two (2) strips seventy two (72) inches long.Length: 72.0 inches. Width: .75 inches. Height: .4375 inches.
Seal, Front fender to runningboard.Length: 13.0 inches.
Seal, cowl-to-fender. Die cut masticated rubber to authentic original dimensions. Includes all factory holes required for installation.
Bulb type seal, gravel shield-to-rear bumper, anti-squeak. Also used as a door weatherstrip for some makes and models. Twelve (12) foot strip.
Seal, front fender baffle, right and left. One (1) pair per car. Length: 5.25 inches.
Seal, fenderskirt edge. Two (2) strips of proper cross section forty two (42) inches long.Length: 42.0 inches. Width: .8125 inches.