Need Assistance?

We are here to help.

Call 800-447-0849

86 items found matching 1935 Cadillac 355D 2 door Collapsible Coupe Convertible
Body Mounting Pad

p/n: 70-0264-48

This Body To Frame Mounting Pad is designed from the original parts for superior fitment and function. Installs under body mount / washer below bracket. Fully molded high quality EPDM rubber.

$11.29/ea.
In Stock
Side Window Lower Bump Stop

p/n: 70-0110-62

This Side Window Lower Bump Stop is designed from the original part for an authentic fit, finish, and function. Requires two (2) stops per window.

$12.19/ea.
In Stock
Front and Rear Door Bumper

p/n: 34-0025-42

High quality steel core Front and Rear Door Bumper for front and rear body hinge pillar. Mounted by screw. For auxiliary use only where needed to prevent door rattles. Replaces factory #372341.

$12.19/ea.
In Stock
1/8" x 7/8" Fabric Hood Lacing

p/n: 60-0578-42

This 1/8" x 7/8" Fabric Hood Lacing is high quality original style woven cotton hood to cowl lacing. This lacing has the slot to install a wire insert or fasten with rivets if so found originally. Available by the foot to accommodate any job.

$12.39/ft.
In Stock
3/16" x 3/4" Fabric Hood Lacing

p/n: 70-2221-42

This 3/16" x 3/4" Fabric Hood Lacing is made of a high-quality original style woven cotton. Available by the foot to accommodate any job.

$12.39/ft.
In Stock
Door Bumper

p/n: 70-1159-71

Pad, door side bumper. Clip retained.

$14.29/ea.
In Stock
Coil wire sleeve

p/n: 70-1179-21

Sleeve, coil wire to distributor. Fluted to match upper water hoses rubber only.

$14.89/ea.
In Stock
Shock Absorber Bushing

p/n: 50-0087-33

Bushing, Delco type, shock absorber link. One and five sixteenths (1-5/16) inch outside diameter, seven sixteenths (7/16) inch inside diameter.

$15.49/ea.
In Stock
Dimmer Switch Grommet

p/n: 40-0083-88

This Dimmer Switch Grommet is used during carpet installations in automotive restorations. Made from high-quality EPDM dense rubber to provide excellent durability. Includes a wide flange for floor dimmer switch fitments.

$16.79/ea.
In Stock
Door Check Link Rod End Stop

p/n: 70-0326-70

End stop and pad, door check link rod. Rubber with embedded steel plate, five sixteenths (5/16) inch diameter thread. Most models with rod type door checks.

$18.99/ea.
In Stock
Door Handle Ferrule

p/n: 70-0111-69

A Ferrule for three fourths (3/4") inch outside door handles. Chrome plated brass. Used for outside door handle or outside trunk handle.

$22.99/ea.
In Stock
2-1/2" Black Bow Drill Cloth Tape

p/n: 70-1172-65

This Bow Drill Cloth Tape is used for covering convertible side window weatherstrip. Black in color and available in a five (5) foot roll.

$22.99/ea.
In Stock
Battery Clamp Cover

p/n: 70-0095-21

This Battery Clamp Cover helps to protect the nearby metal and finish. Fully molded from high-quality EPDM rubber to ensure durability. Good copy from an original part.

$27.89/ea.
In Stock
Brake cable anti-rub cover

p/n: 70-2102-24

Cushion, brake cable line bumper. Four (4) per car.

$27.89/ea.
In Stock
Exhaust support grommet

p/n: 70-0202-13

Grommet, exhaust system support bracket.

$29.39/ea.
In Stock
Rear spring bushing

p/n: 70-0589-32

Bushing, rear spring, front or rear eye leaf.

$31.99/ea.
In Stock
Windshield Division Bar Gasket

p/n: 70-0059-51

Gasket, set, inner and outer, for divided windshield center post. Two (2) piece set.

$37.99/set
In Stock
Starter solenoid boot

p/n: 70-0371-21

Boot, starter solenoid.

$39.39/ea.
In Stock
Rear spring bushing

p/n: 70-0588-32

Bushing, rear spring, front eye leaf. Four (4) per car.

$40.29/ea.
In Stock
Horn trumpet grommet

p/n: 70-0302-21

Grommets, horn projector. For under hood horn brackets. Two (2) per car.

$40.29/pr.
Made to Order Takes 5-7 Days
Trunk Weatherstrip

p/n: 70-0798-84

This Trunk Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.

$41.99/ea.
In Stock
Fender Welting with 3/16 Bead - 25ft

p/n: 70-1099-44

A superior quality Fender Welting material constructed of reinforced black vinyl over a vinyl core. Typically used for attaching two (2) fenders to body. Sold in a 25 foot roll.

$61.49/ea.
In Stock
Steering Column Floorplate

p/n: 70-0340-88

Seal, steering column to toe board. Three fourths (3/4) inch thick, high grade sponge, die cut holes.Length: 3.875 inches. Width: 3.875 inches.

$62.99/ea.
Made to Order Takes 5-7 Days
Rumble Seat Step Mounting Pad

p/n: 70-0043-44

Pad, rumble seat step mounting for fender, double beaded edge per original. Width: 4.375 inches.

$63.69/ea.
Made to Order Takes 5-7 Days
Chrome Fender Welting - 25ft

p/n: 70-1101-44

Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Twenty five (25) foot roll. Typically used to attach two (2) fenders to body. For fifty (50) foot roll see our #70-1102-44.

$64.19/ea.
In Stock