Please click on the part name in red in order to get a complete description.
Filler, runningboard-to-body, forty (40) inch long strip. For sixty four (64) inch strips see our #70-1117-45.
Bulb type seal, gravel shield-to-rear bumper, anti-squeak. Also used as a door weatherstrip for some makes and models. Twelve (12) foot strip.
Grommet, door sill mat retainer at lower door opening. All sill plates with metal stud retainer. (Included in our #40-0542-49 set).
Mat, door opening, on body. Front doors. For rear doors see our #70-2623-49. Excellent craftsmanship with authentic metal core with studs like original.
Mats, door opening step, with metal backing as original. Two (2) piece set.2 piece set for 2 door Fleetline Aerosedan, Style 1007 ONLY.
Mats, door sill opening, on body. Stud type, includes retaining grommets (#40-0125-49). For clip type see our #40-0541-49.
Matting, cover panel extension, fender to door, rear, right and left, with brass core as original.
Mats, door opening step, rubber with metal backings as original.Length: 41.0 inches.
Mat, door opening, on body. Rear doors. For front doors see our #70-2622-49. Excellent craftsmanship with authentic metal core with studs like original.
Mats, door sill opening, on body. Made without metal core (copied from authentic rubber only original). Molded-in carrot retainers.
Matting, cover panel extension, fender to door, front, right and left, with brass core, as original.
Mats, door sill opening, on body. Clip type. For stud-type see our #40-0542-49) mat includes retaining grommets (40-0125-49).
Door Opening Step Pad. Perfect copy of original accessory.
Mats, rear door opening, with metal backing, proper body contour and attaching holes. Two (2) piece set for both rear doors.Length: 21.875 inches.
Mats, front door opening, with metal backing, proper body contour and attaching holes. Two (2) piece set for both front doors.Length: 30.375 inches.
Mat pair for door sill threshold opening, on body. Made with authentic appearance and constructed of long lasting rubber like original. Perfect replica of factory #1433321, however it should work fine as a replacement of #1497247, 1433281, and 1803065.
Seal, wheel streamliner (fenderskirt) to fender. Two (2) strips each cut five (5) foot long.Length: 60.0 inches. Width: .625 inches.
Inner Fender Seal for anti-rattle, runningboard apron to body, or fender splash panels. Nine sixteenths (9/16) inch by seven eighths (7/8) inch slotted sponge rubber to accept rivets. Sold in eight (8) foot strips.
LaSalle monograms for center of runningboard matting, exact copy, to be in-laid.
Mounting pad for our #25-0018-44 fender step.Length: 7.375 inches.
Pad, rumbleseat step slip over style for original core, "DB" logo.
Pad, rumbleseat step, with "DeSoto" logo, full slipover type to fit old carcass and outer trim ring. See also our #40-0353-44.Height: .50 inches.
Pad, rumbleseat step bears Chrysler medallion logo in center.Height: .50 inches.
Pad, rumbleseat step, on rear bumper bracket or fender. Rubber cover only, full slip-over type with bowtie emblem.
Pads, rumbleseat step.
Pad, rear bumper step, rubber only. Fits old metal core.Height: .8125 inches.
Pad, rumble seat step on fender.
Step pad, rumbleseat upper, with "P" logo. Fully molded with core and mounting stud.Height: .625 inches.
Pad, rumbleseat step, with "P" logo, fully detailed slipover pad for old core. Fits original trim ring.Height: .50 inches.
Pad, rumbleseat step, with "DS" logo. Fits old bracket and bezel. See our #40-0055-44 also.Height: .50 inches.
Pad, rumbleseat step, with "Dodge" logo, slip over type to fit old steel core. Perfect detail and lettering.Height: .50 inches.
Step, rumbleseat fender with molded-in studs.Length: 6.375 inches.
Cover, rumbleseat step pad, slipover type, excellent copy.Width: 5.0 inches. Height: 5.0 inches.
Step pad, rumbleseat, on rear fender, with bowtie emblem. Steel core with bolt.Width: 4.375 inches. Height: 5.25 inches.
Step pad, rumbleseat, upper, with Chrysler medallion logo. Fully molded with core and mounting stud.Height: .625 inches.
Running Board Step Pad. Made from top quality rubber to ensure durability.
Seal, runningboard to rear quarter panel special.
Seal strip, runningboard to body lower edge, exact copy. Top quality, each strip six (6) foot long.Length: 72.0 inches. Height: .5625 inches.
Liner, runningboard to body, (side apron to body seal). Set consists of two (2) pieces seven (7) foot long. One (1) inch width is after fold over.
Covers, runningboard. Pre-molded.
Matting, runningboard. Special original design molded in solid aluminum molds, right and left. Size includes stock for apron riser and outer radius.
Runningboard matting. Fully molded rubber strips with full length steel cores molded in.
Runningboard matting. Fully molded with crowned blocks. Top quality rubber, flawless detail. No splicing or butting required.
Runningboard matting. Fully molded, fine detail. Incorporates embossed underside to fit metal bead around edge of original runningboard steel.
Runningboard Matting. Fully molded with all original details. Includes integral flaps of rubber on 3 sides to cushion fenders and splash apron. No splicing or butting required.
Runningboard matting. Made from short wheel-base matting with extension pieces to make full length cover. This is a proven job, with a minimum of butting.
Runningboard covers. Imported.
Runningboard matting for Model 115C only. Made from the molded runningboard matting for the 120's (our #30-0214-49).
Edge panel, runningboard. Exact copy including 1/4 inch mounting studs. A perfect replica in highest quality material. 43-1/2 inch long.
Runningboard matting. Fully molded right and left hand. Top quality rubber, flawless detail. Includes rubber cross molding for in front of rear fender.
Runningboard Matting. Fully molded with all original details. No splicing required. Metal backing or metal trim not included.
Matting, runningboard, original pattern with material to come down over ends and sides.
Runningboard matting. Fully molded with all original details including underside clearance for embossed runningboard for a perfect fit.
Runningboard Matting. Fully molded with all original details. Includes integral flaps of rubber on 3 sides to cushion fenders and splash apron.
Runningboard center strip. Fits original metal retainer. Authentic reproduction with correct detail.
Covers, runningboard. Pre-molded.
Grommets, runningboard to frame and front fender to cowl. Rubber grommets and metal washers. Twenty four (24) piece set.
Insulator, washer, runningboard to frame bracket bolt, lower. Ten (10) to fourteen (14) required per car.
Trim strips, stainless steel, with retaining clips (not sold separately).
Trim strips, stainless steel, with retaining clips.