Need Assistance?

We are here to help.

Call 800-447-0849

94 items found matching 1940 Cadillac Series 75 0 door Chassis
Door Handle Grommet

p/n: 70-0177-69

Grommet for outside door handle bezel.

$12.19/ea.
In Stock
Door Lock Mounting Pad

p/n: 27-0020-69

Mounting pad, door lock cylinder, right and left.Length: 1.6875 inches.

$13.89/pr.
In Stock
Electrical Terminal Boot

p/n: 30-0279-41

This Electrical Terminal Boot is designed from the original part for superior fitment and seal. This boot works to cover and protect electrical terminal connections.

$15.99/ea.
In Stock
Fender Skirt Edge Weatherstrip

p/n: 20-0111-44

This Fender Skirt Edge Weatherstrip pair is designed from the original part for superior fitment, finish and sealing function. Two five (5) foot strips that fit between the rear wheel fender skirt and rear quarter panel.

$85.79/pr.
In Stock
Fender Skirt Edge Weatherstrips

p/n: 70-0055-45

This Fender Skirt Edge Weatherstrip pair is designed from the original part for superior fitment, finish and sealing function. Two five (5) foot strips that fit between the rear wheel fender skirt and rear quarter panel.

$98.89/pr.
Made to Order Takes 5-7 Days
Fender Welting 1/4" Bead - 25ft

p/n: 70-1097-44

Welting, fender. Superior quality, proper construction of reinforced vinyl over vinyl core, one and three eighths (1-3/8) inch wide, black only. One fourth (1/4) inch bead, twenty-five (25) foot roll. Typically used to attach two (2) fenders to body.

$64.19/ea.
In Stock
Fender Welting 1/4" Bead - 50ft

p/n: 70-1098-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide. One fourth (1/4) inch bead, fifty (50) foot roll. Typically used to attach four (4) fenders to body.

$104.99/ea.
In Stock
Fender Welting with 3/16 Bead - 25ft

p/n: 70-1099-44

A superior quality Fender Welting material constructed of reinforced black vinyl over a vinyl core. Typically used for attaching two (2) fenders to body. Sold in a 25 foot roll.

$61.49/ea.
In Stock
Fender Welting with 3/16" Bead - 50ft

p/n: 70-1100-44

A superior quality Fender Welting material constructed of reinforced black vinyl over a vinyl core. Typically used for attaching four (4) fenders to body. Sold in a 50 foot roll.

$104.99/ea.
In Stock
Firewall Grommet

p/n: 70-1203-20

This Firewall Grommet is used to run various electrical and dash gauge wires through the firewall. Also see our 32-1201-20 and 32-0225-20.

$42.89/ea.
In Stock
Front Bumper Grommet

p/n: 70-0291-28

Grommets, front bumper arm. Hollow construction for good fit. Fully molded rubber.

$115.69/pr.
In Stock
Front Engine Support

p/n: 70-0276-11

This Front Engine Support is designed from original parts for an exact reproduction. Constructed of rubber and steel for proper engine vibration isolation.

$330.99/pr.
In Stock
Front Fender Dust Shield Clip

p/n: 70-0681-44

This Front Fender Dust Shield Clip is designed from spring tempered wire, to original configuration. Up to sixteen (16) per car required.

$9.19/ea.
In Stock
Front Spring Bumper

p/n: 70-0339-32

Bumper, front spring, upper arm on frame. Rubber with heavy steel core, including five sixteenths (5/16) inch stud.

$264.19/pr.
Made to Order Takes 5-7 Days
Front spring bumper

p/n: 70-0215-32

Bumpers, front spring, lower arm.

$118.49/pr.
Made to Order Takes 5-7 Days
Glovebox Link Bumper

p/n: 70-1459-88

Bumper, glovebox check link. Fits on glovebox door arm as needed.Length: .75 inches. Width: .3125 inches. Height: .4375 inches.

$7.99/ea.
In Stock
Gravel Shield

p/n: 70-0093-45

Rear body deflector apron or valance. Original copy including fastening bolt holes. You locate exhaust hole where needed. Approximately fifty eight (58) inches long.

$325.59/ea.
In Stock
Hood and Trunk Bumper Cap for Adjustment Screw

p/n: 70-0294-42

This Hood and Trunk Bumper Cap is designed from the original part for superior fitment, finish and function. Cap type for front hood or rear trunk lid adjustment screw.

$4.99/ea.
In Stock
Hood lock pad

p/n: 70-0188-42

Grommet pad, hood lock pilot.

$15.99/ea.
In Stock
Hood Rest Pad

p/n: 70-0150-42

Pad, hood rest, molded to brass core, screw mounted.Width: 1.75 inches.

$32.69/ea.
In Stock
License plate mounting pad

p/n: 70-0124-17

Pad, rear license bracket mounting. See our other parts #70-0174-17 and #70-0348-17 sold separately.

$66.59/ea.
Made to Order Takes 5-7 Days
Lower Suspension Arm Dust Seal

p/n: 70-0624-32

Dust seal, "O" ring. Lower suspension arm pin bushing. Four (4) required per car.Height: .25 inches.

$19.99/ea.
In Stock
Lower Suspension Arm Dust Seal Set

p/n: 70-0865-32

This four (4) piece Lower Suspension Arm Dust Seal Set is fully molded of high-quality EPDM dense rubber for durability and proper fitment. These seals are used to protect your lower suspension arm bushings from dust and debris.

$119.99/set
Made to Order Takes 5-7 Days
Parking Light Mounting Pad

p/n: 70-0213-16

Pads, parking light, excellent copy.

$112.19/pr.
Made to Order Takes 5-7 Days
Peel-N-Stick Door Edge Weatherstrip

p/n: 70-0390-WT

This Peel-N-Stick Door Edge Weatherstrip is designed for a specific set of vehicles but with its generic shape, has many uses outside of its original purpose. Available by the foot. Available by the foot.

$5.19/ft.
In Stock