Door - Gravel Shield - Running Board Weatherstrip
p/n: 60-0054-73
This Door - Gravel Shield - Running Board Weatherstrip is a anti-squeak bulb type extrusion with fitment for General Motors vehicles. A twelve (12) foot strip made of high-quality EPDM dense rubber and designed from original parts for superior fitment, finish and function.
Door Alignment Pad
p/n: 70-1821-71
Wedge pads, door aligning.Length: 1.125 inches. Width: .5 inches. Height: .875 inches.
Door and Trunk Handle Gasket
p/n: 40-0132-70
Pad, door handle escutcheon. Two and five sixteenths (2-5/16) inch by one and seven sixteenths (1-7/16) inch.
Door Bottom Weatherstrips
p/n: 40-0538-73
This Door Bottom Weatherstrip pair is designed from the original part for superior fitment and seal. Held to door by steel strip. Sponge type rubber as original. For four (4) door models.
Door Bottom Weatherstrips
p/n: 40-0537-73
This Door Bottom Weatherstrip pair is designed from the original part for superior fitment and seal. Held to door by steel strip. Sponge type rubber as original. For two (2) door models.
Door Bumper
p/n: 70-1156-71
Door Side Bumper made from EPDM Dense rubber. Clip retained. Appears identical to Atwood #107, #208. Width: 1-1/2" inches. Height: 1-5/16"
Door Bumper
p/n: 40-0154-70
Bumper, door side. One and one fourth (1-1/4) inch long by one (1) inch wide. Similar to our #40-0010-70, but different workface.Length: 1.0 inches.
Door Bumper
p/n: 40-0010-70
Pad, door jamb, fully detailed. One and one eighth (1-1/8) inch long, one and one fourth (1-1/4) inch wide.Length: 1.125 inches. Width: 1.25 inches.
Door Bumper
p/n: 40-0037-70
Pad, door jamb. One and nine sixteenths (1-9/16) inch long by one and one eighth (1-1/8) inch wide.Length: 1.625 inches. Width: 1.0625 inches.
Door Bumper
p/n: 40-0131-70
Bumper, door side. Approximate size one half (1/2) inch by three fourth (3/4) inch by two (2) inch. Length: 2.0 inches. Width: .50 inches.
Door Bumper
p/n: 40-0262-70
Bumper, door.Chrysler 1934 Bumper, door. Chrysler 1932-34 Bumper, decklid. Two (2) required per car. Length: 2.50 inches. Width: 1.8125 inches.
Door Bumper
p/n: 70-2045-71
This Door to Body Bumper is quality reproduction of the original factory part. Use varies depending upon model and body type. Some models uses four (4) bumpers for front doors and four (4) for rear doors.
Door Check Strap
p/n: 40-0535-70
Strap, door check. T-type, special heavy duty construction of rubber with multiple ply webbing and molded-in steel crossbar. Full length as original with one eighth (1/8) inch by seven eighths (7/8) inch steel crossbar.
Door End Cap
p/n: 70-3151-73
End cap, front door weatherstrip cover. Fully molded with metal core just like the original.
Door End Cap Filler
p/n: 70-1620-73
This Door End Cap Filler pair is designed from the original part for superior fitment and seal. Pre-drilled holes for easy installation. These premium seals have a corrosion resistant brass metal core.
Door End Cap Fillers
p/n: 82-0208-73
This Door End Cap Filler pair is designed from the original part for superior fitment and sealing. Fully molded with metal core just like original.
Door End Cap Fillers
p/n: 70-4673-73
This Door End Cap Filler pair manufactured with soft, yet durable, closed-cell EPDM sponge rubber with galvanized steel cores. Designed from the original part for superior fitment, finish and function.
Door handle gasket
p/n: 40-0191-70
Pad, outside door handle escutcheon. Compare with our #40-0207-70.
Door Handle Gasket
p/n: 40-0133-70
Pad, door handle escutcheon. Two and three fourths (2-3/4) inch by one and one fourth (1-1/4) inch.Width: 2.75 inches. Height: 1.25 inches.
Door handle gasket
p/n: 70-2628-69
Gasket set, door handle. Machine die cut to original profile. Each set is enough for two doors.
Door Jamb Bumper Pad
p/n: 40-0042-70
This Door Jamb Bumper Pad is designed from the original part for superior fitment and seal. A reproduction of earlier type, screw retained and a perfect copy.
Door opening step grommet
p/n: 40-0125-49
Grommet, door sill mat retainer at lower door opening. All sill plates with metal stud retainer. (Included in our #40-0542-49 set).
Door opening step pad
p/n: 40-0541-49
Mats, door sill opening, on body. Clip type. For stud-type see our #40-0542-49) mat includes retaining grommets (40-0125-49).
Door Opening Step Pad
p/n: 40-0542-49
This Door Opening Step Pad set installs on the door sill opening, on the body. Designed with the original pattern and metal core.
Door Opening Threshold Pad
p/n: 70-2517-49
Mat pair for door sill threshold opening, on body. Made with authentic appearance and constructed of long lasting rubber like original. Perfect replica of factory #1433321, however it should work fine as a replacement of #1497247, 1433281, and 1803065.
Door Plug Beltline Extender
p/n: 70-3214-62
This Door Plug Beltline Extender pair is designed from the original part for superior fitment and seal. This piece works on beltline as an extender. Width: 2.0 inches.
Door Vent Window Weatherstrips
p/n: 70-4697-55
This Front Door Vent Window Weatherstrip pair is designed from the original parts for superior fitment and seal. A two (2) piece pair that fits both driver (Left) and passenger (Right) front doors of the vent / wing window assemblies.
Door Weatherstrip
p/n: 40-0489-73
Weatherstrip, door. Note: Order part #70-2592-73, end cap fillers separately.
Door Weatherstrip
p/n: 70-3679-72
Door edge weatherstrip. This part is the primary door to body weatherstrip. Includes both end cap fillers.
Door Weatherstrip
p/n: 40-0487-73
This Door Weatherstrip is made of a high-quality dense rubber. The weatherstrips is commonly used as a bottom door weatherstrip but can be for a variety of uses. Available by the foot.
Door weatherstrip
p/n: 40-0467-73
Weatherstrip, door hinge pillar. Molded with metal core and attaching tabs.
Door Weatherstrip
p/n: 70-1615-72
This front door weatherstrip pair are designed from the original parts for superior fitment and seal. This part is the primary door to body weatherstrip. The pair includes both end cap fillers.
Door Weatherstrip
p/n: 70-1832-72
Door edge weatherstrip with molded ends. This part is the primary door to body weatherstrip. Includes clips for easy installation. Made of top quality rubber.
Door Weatherstrip
p/n: 70-1292-73
This Door Weatherstrip is used on the bottom of the door opening. Available by the foot.
Door Weatherstrip
p/n: 70-1683-72
Door edge weatherstrip. This part is the primary door to body weatherstrip. Note: order #70-1684-73 end cap fillers separately.
Door Weatherstrip
p/n: 40-0367-57
Door belt inner weatherstrip (scraper seal). Front door only. Thirty six (36) inches long.
Door weatherstrip
p/n: 70-2291-72
Door edge weatherstrip. This part is the primary door to body weatherstrip. Includes attached end cap fillers.
Door Weatherstrip
p/n: 70-1448-73
This Door Weatherstrip for the door sill is made of an extruded dense rubber. Available by the foot.
Door Weatherstrip
p/n: 70-1863-72
Door edge weatherstrip. This part is the primary door to body weatherstrip. Includes attached end cap fillers.
Door weatherstrip
p/n: 40-0340-73
Weatherstrip, door, body hinge pillar to front quarter panel, right and left. Copy of original (except no steel core). Retained by rubber tabs for screws.
Door weatherstrip end cap
p/n: 70-2592-73
Weatherstrip, door seal end cap or filler. Fully original molded type with metal core. Order perimeter weatherstrip #40-0489-73 separately.
Door Weatherstrip End Cap
p/n: 70-1684-73
Seal or End cap, door weatherstrip end. Fully molded with original type metal core. See our #70-1683-72 for main weatherstrip.Width: 4.25 inches.
Door Weatherstrip End Cap
p/n: 82-0183-73
Weatherstrip, door seal end cap or filler. Fully molded. Order #82-0184-72 for perimeter weatherstrip separately.Width: 3.75 inches.
Door Weatherstrip End Caps
p/n: 70-3149-73
End cap, front door weatherstrip cover. Fully molded with with metal core just like the original. Width: 4.0 inches.
Door Weatherstrip End Caps
p/n: 70-2053-79
This Door Weatherstrip End Caps filler pair is designed from the original part for superior fitment and seal. Fully molded with metal core.