Gearshift Boot
p/n: 40-0111-88
Boot, base of gearshift lever. Black rubber. For brown see our #40-0111-89. Made separately to fit most of our gearshift floorplates. Copied from original.
Gearshift Floorplate
p/n: 40-0137-88
Floorplate, gearshift and handbrake cover. Steel core as original, with exact rubber pattern.Length: 13.125 inches. Width: 10.875 inches.
Gearshift Floorplate
p/n: 40-0156-88
Floorplate, gearshift and handbrake. Hole cover, grass core as original.Length: 12.50 inches. Width: 9.0 inches.
Gearshift Floorplate
p/n: 40-0101-88
Floorplate, gearshift. Black rubber. For brown see our #40-0101-89. Made without rubber boot, but with metal core.
Gearshift Floorplate
p/n: 40-0068-88
Floorplate, gearshift and handbrake. Finely detailed pattern, with steel core as original.Length: 10.5625 inches. Width: 8.625 inches.
Gearshift Floorplate
p/n: 40-0146-88
Floorplate, gearshift and handbrake. Perfect reproduction, including brass core.Length: 8.0 inches. Width: 7.25 inches.
Gearshift Floorplate
p/n: 40-0073-88
Floorplate, gearshift and handbrake. Brass core as original.Length: 13.875 inches. Width: 10.0 inches.
Gearshift Floorplate
p/n: 40-0017-88
Floorplate, gearshift and handbrake. Full metal insert as original.Length: 13.125 inches.
Gearshift Floorplate
p/n: 40-0105-88
Floorplate, gearshift. Black rubber. For brown see our #40-0105-89. Metal core, bend as needed at assembly. See #40-0111-88 and #40-0111-89 for boot.
Gearshift Grommet
p/n: 40-0075-88
Grommet, gearshift lever, small type. Five eighths (5/8) inch inside diameter.
Glass up stop bumper
p/n: 70-3623-62
Front door glass up stop bumper. For models w/out power vent windows. Use two (2) or four (4) per vehicle. Refer to your vehicle to see how many are required.
Glovebox Door Bumper
p/n: 40-0501-88
This Glovebox Door Bumper is fully molded and designed from the original part for superior fitment and seal. This bumper is made from high-quality EPDM dense rubber to provide excellent durability.
Handbrake Floorplate
p/n: 40-0106-24
Floorplate, handbrake. Black rubber. For brown see our #40-0106-89. Metal core as original. Flat plate, can be bent as required.Length: 6.50 inches.
Handbrake Floorplate
p/n: 40-0110-24
Floorplate, handbrake. Black rubber. For brown see our #40-0110-89. Brass core as original.Length: 6.6875 inches.
Handbrake Floorplate
p/n: 40-0102-24
Floorplate, handbrake. Black rubber. For brown see our #40-0102-89. Brass core, proper beading. Bend at assembly.Length: 8.125 inches.
Handbrake Floorplate
p/n: 40-0052-88
Floorplate, handbrake. Black rubber. For brown see our #40-0052-89. Metal core as original.Length: 6.8125 inches.
Hardtop Roof Rail Weatherstrip
p/n: 70-1783-68
Hardtop roof rail weatherstrip. This part fits on the roof of the vehicle and seals the side window when the window is fully raised.
Hardtop Roof Rail Weatherstrip
p/n: 70-1675-68
Hardtop roof rail weatherstrip. This part fits on the roof of the vehicle and seals the side window when the window is fully raised.
Hardtop Roof Rail Weatherstrip
p/n: 70-3103-68
This Hardtop Roof Rail Weatherstrip pair is made of high-quality EPDM rubber with fully molded ends for a factory like fit. These seals fit on the roof of the vehicle and function to seal the side windows when the window is fully raised.
Hardtop Roof Rail Weatherstrip
p/n: 70-1952-68
This Hardtop Rear Roof Rail Weatherstrip pair fits on the roof of the vehicle and seals the side window when the window is fully raised.
Hardtop Roof Rail Weatherstrip
p/n: 40-0456-68
Hardtop roof rail weatherstrip. This part fits on the roof of the vehicle and seals the side window when the window is fully raised.
Hardtop Roof Rail Weatherstrip
p/n: 70-1676-68
Hardtop roof rail weatherstrip. This part fits on the roof of the vehicle and seals the side window when the window is fully raised.
Hardtop Roof Rail Weatherstrips
p/n: 82-0209-68
This Hardtop Roof Rail Weatherstrip pair is made of high-quality EPDM rubber with molded ends for a factory like fit. This part fits on the roof of the vehicle and seals the side window when the window is fully raised. For models with stationary (fixed) rear quarter windows.
Harmonic balancer service
p/n: 40-0372-12
Vibration Damper (crankshaft impulse neutralizer assembly). Revulcanization service only.
Headlight Bracket Pad
p/n: 40-0236-14
Pad, headlight bracket seal. Without metal core. One (1) pair per car.Length: 5.75 inches.
Headlight Grommet
p/n: 40-0009-14
Grommet, headlight bar to shell. One and one fourth (1-1/4) inch round hole.
Headlight Grommet
p/n: 40-0008-14
Grommets, headlight bar to shell. Slightly oval. One and one fourth (1-1/4) inch diameter hole.
Headlight Mounting Pad
p/n: 40-0219-14
Mounting pad, headlight body to bracket. Without steel core.Length: 5.625 inches.
Headlight Mounting Pad
p/n: 40-0059-14
Pad, headlight bar to fender mounting. Four and three fourths (4-3/4) inch by one and one fourth (1-1/4) inch.Length: 4.75 inches. Width: 1.25 inches.
Headlight Mounting Pad Service
p/n: 40-0312-14
Anchor pad, head light crossbar to radiator shell. Right and left. Revulcanization service only.
Hinge Pillar Weatherstrip
p/n: 70-1811-63
Convertible Hinge Pillar Weatherstrip - Attaches to the body and seals between the A-pillar post and the front section of the door or vent window frame when the door is closed.
Hinge Post Weatherstrip
p/n: 70-1769-73
Weatherstrip, body hinge pillar, lower (front door).Length: 10.125 inches.
Hood bumper
p/n: 70-0013-42
Pads, hood hold-down clamp, mount on clamp swivels to hold hood corners in. Set of four (4) rubber pads in solid brass, chrome plated cups.
Hood Bumper
p/n: 40-0164-42
Pad, hood panel center bracket. Hollow, to fit over original steel bracket.Length: 1.375 inches. Width: 1.375 inches.
Hood Bumper
p/n: 40-0354-42
Bumper, fender to hood. Two (2) per car. Held by four (4) rivets.Length: 2.9375 inches.
Hood Bumper
p/n: 70-1607-42
This Hood Bumper is a quality reproduction of the original factory part. These rubber bumpers attach to support / cushion the hood closure.
Hood Bumper
p/n: 40-0118-42
Bumpers, hood top panel to side panels. Four (4) piece set with brass core as original. Four (4) per vehicle.
Hood Bumper
p/n: 40-0313-42
Bumper, hood panel assembly. Same as our #40-0164-42. (except vulcanized to brass cores). Length: 1.375 inches. Width: 1.3375 inches.
Hood Corner Pad
p/n: 40-0127-42
Pads, hood corners, brass core. Approximately 80 degree angle. Integral tabs for installing.Length: 1.50 inches.
Hood Corner Pad
p/n: 40-0090-42
Pads, hood rear corners. Open angle for long hood. Metal core as original.Length: 1.50 inches.
Hood Corner Pad
p/n: 40-0089-42
Pads, hood front corners. Rubber with metal core as original.Length: 1.4375 inches.
Hood Corner Pad
p/n: 40-0128-42
Pads, hood corners. Square type, brass core. Integral installation tabs. 90 degree angle, used on front or rear corners, as required.
Hood Corner Pads
p/n: 40-0187-42
This Hood Corner Pad pair is an exact copy of the original. This pad fits between the engine hood and the body to isolate noise and vibration.
Hood latch swivel
p/n: 70-0061-42
Swivel, hood latch. Exact copy from .075 steel, pierced for rivets, not plated.
Hood Support Rod Top Cap
p/n: 40-0346-42
Pad, hood rest rod. For five sixteenths (5/16) inch diameter hood support rod. Also see our #40-0103-42.Length: 1.0 inches.
Hood to Cowl Weatherstrip
p/n: 70-2236-43
This Hood to Cowl Weatherstrip is designed from the original part for superior fitment and seal. An exact reproduction of the original profile. This weatherstrip installs at the rear of the engine bay to seal between the hood and vehicle body cowl.
Hood to Cowl Weatherstrip
p/n: 70-2341-42
This Hood to Cowl Weatherstrip is designed from the original part for superior fitment and seal. A proper extrusion approximately sixty-two (62) inches long with pre-installed fastener clips.
Hood to Cowl Weatherstrip
p/n: 70-2219-43
This Hood to Cowl Weatherstrip is designed from the original part for superior fitment and seal. This six (6) long original profile extrusion provides complete coverage.
Hood to Cowl Weatherstrip
p/n: 40-0470-42
This Hood to Cowl Weatherstrip is designed from the original part for superior fitment and seal. This six (6) foot long x 13/16” wide weatherstrip provides complete coverage.
Hood to Cowl Weatherstrip
p/n: 40-0475-42
This Hood to Cowl Weatherstrip is designed from the original part for superior fitment and seal. The weatherstrip can also be used as a radiator seal. Available by the foot.
Hood to Fender Bumper
p/n: 60-0542-42
This Hood to Fender Bumper set is a quality reproduction of the original factory part. These rubber bumpers attach to the front fender to support / cushion the hood closure.
Hood to Fender Bumper
p/n: 70-2043-42
This Hood to Fender Bumper pair is a quality reproduction of the original factory part. These rubber bumpers attach to the front fender to support / cushion the hood closure.
Hood to Fender Bumper
p/n: 40-0503-42
Bumper, hood to fender ledge. Correct original cross-section. Up to ten (10) required per car.
Hood to Fender Bumper Set
p/n: 70-2672-42
This Hood to Fender Bumper Set is a quality reproduction of the original factory part. These rubber bumpers attach to the front fender to support / cushion the hood closure.
Hood to Fender Bumper Set
p/n: 70-2315-42
This Hood to Fender Bumper Set is a quality reproduction of the original factory part. These rubber bumpers attach to the front fender to support / cushion the hood closure.
Hood to Radiator Weatherstrip
p/n: 70-2385-43
Weatherstrip, hood to radiator. Proper rubber cross section with pre-drilled holes, cut outs and included attaching clips.Length: 61.25 inches.
Hood to Radiator Weatherstrip
p/n: 70-2386-43
Weatherstrip, hood to radiator. Proper rubber cross section with pre-drilled holes, cut outs and included attaching clips.Length: 62.875 inches.
Hood to Radiator Weatherstrip
p/n: 70-1580-42
Weatherstrip, hood to radiator shroud.Width: 1.3125 inches.
Hood to Radiator Weatherstrip
p/n: 40-0512-42
Weatherstrip, hood to grill or radiator shroud. Two (2) pieces, each sixteen (16) inches.Width: 1.3125 inches.
Hood to Radiator Weatherstrip
p/n: 70-2073-42
This Hood to Radiator weatherstrip is designed from the original part for superior fitment and seal. This seal mounts at the front of the engine bay directly to the radiator support.
Horn trumpet grommet
p/n: 40-0086-21
Grommet for trumpet horn wire through motor cover. Close reproduction. Two (2) per car.
Inner Side Window Bumper
p/n: 70-0775-62
Bumper, inner side window garnish molding. One (1) per door.Length: 1.0 inches. Width: .3125 inches. Height: .25 inches.