Swing-Out Windshield Weatherstrip
p/n: 60-0447-50
This Swing-Out Windshield Weatherstrip is designed from the original part. The seal mounts into the track (channel) attached to the glass that goes all the way around the windshield and creates a seal when the glass is pressed against the body of the vehicle.
Trunk Weatherstrip
p/n: 70-3045-84
This Trunk Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.
Convertible Rest Liner
p/n: 30-0257-65
Liner, folding top bow rest. Flexible high grade rubber to snap into original folding top cradle. Thirteen (13) inches long.
Rear Window Gasket
p/n: 70-2466-81
This Rear Window Gasket mounts around the full perimeter of the back glass. It has properly molded corners to precisely conform to the glass and has the slot to accommodate the outer edge's decorative molding.
Rear OR Quarter Stationary Window Weatherstrip
p/n: 70-4163-77
This Rear OR Quarter Stationary Window Weatherstrip is designed from the original part for superior fitment and seal. This window weatherstrip fits between the stationary glass and vehicle body for small quarter or rear windows.
Trunk Weatherstrip
p/n: 70-3051-84
This Trunk Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.
Rear Window Gasket Set
p/n: 70-2312-83
This Rear Window Gasket Set contains the rear window gaskets themselves and the locking strips. Four (4) piece set mounts around the two (2) separate back windows. The ends may require trimming and bonding for installation.
Headlight Grommet
p/n: 40-0008-14
Grommets, headlight bar to shell. Slightly oval. One and one fourth (1-1/4) inch diameter hole.
Rear Sliding Window Gasket
p/n: 70-4308-81
This two (2) piece Rear Sliding Window Gasket set mounts around the full perimeter of the back glass and has properly molded corners for a precise, factory fit. Includes locking strip for window gasket.
Trunk Weatherstrip
p/n: 70-3046-84
This Trunk Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.
Trunk Weatherstrip
p/n: 70-3048-84
This Trunk Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.
Rear Spare Wheel Carrier Seal
p/n: 40-0141-37
Grommet, rear spare wheel carrier.Some models require 3 pieces (1-1/2 prs).Length: 3.375 inches.
Front Bumper Grommet
p/n: 40-0122-30
Grommets, front bumper. Hollow construction for good fit. Fully molded rubber.
Engine Mount Service – Revulcanization Only
p/n: 40-0428-11
This Revulcanization Service Only is designed to restore your Rear Engine Support Mount to a like new original condition. Service requires your metal core. Please call or email for more service details and ordering.
Headlight Bracket Pad
p/n: 40-0218-14
Pad, headlight to bracket without steel core.Length: 5.125 inches.
Window Felt Beltline Weatherstrips
p/n: 80-0599-57
This is a high-quality material Window Felt Beltline side window horizontal weatherstrip set (also known as beltline weatherstrip). This four (4) piece set includes the inner and outer window felt beltline weatherstrips for each front door side window.
Trunk Weatherstrip
p/n: 70-1129-84
This Trunk Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk lid.
Door Bottom Weatherstrips
p/n: 40-0538-73
This Door Bottom Weatherstrip pair is designed from the original part for superior fitment and seal. Held to door by steel strip. Sponge type rubber as original. For four (4) door models.
U Jamb Lock Pillar Filler
p/n: 70-2347-79
Door lock pillar seal. This part seals the bottom of the rear side window, and may also be known as a door jamb seal.
Rumble Seat Step Pad
p/n: 40-0124-44
Pad, rumble seat step, with "Dodge" logo, slip over type to fit old steel core. Perfect detail and lettering.Height: .50 inches.
Swing-Out Windshield Weatherstrip Set
p/n: 40-0171-52
This three (3) piece Swing-Out Windshield Weatherstrip Set is designed for superior fitment, finish and function. Three (3) piece set, consisting of stationary weatherstripping for bottom and sides.
Rear Window Gasket
p/n: 70-2657-81
This Rear Window Gasket weatherstrip is made just like the original and mounts around the full perimeter of the back glass. The ends may require trimming and bonding for installation.
U Jamb lock pillar filler
p/n: 70-2047-79
Door lock pillar seal. This part seals the bottom of the rear side window, and may also be known as a door jamb seal.
Side or Rear Cargo Door Weatherstrips
p/n: 70-3056-72
This Side or Rear Cargo Door Weatherstrip pair is designed from the original parts for superior fitment and seal. These cargo door weatherstrips glue directly on the door to seal the driver and passenger doors when closed.
Windshield Gasket
p/n: 70-2444-50
This Windshield Gasket mounts around the full perimeter of the front glass and has properly molded corners for a precise, factory fit.
Door weatherstrip end cap
p/n: 70-2592-73
Weatherstrip, door seal end cap or filler. Fully original molded type with metal core. Order perimeter weatherstrip #40-0489-73 separately.
Swing-Out Windshield Weatherstrip
p/n: 40-0033-52
This Swing-Out Windshield Weatherstrip comes in an eleven (11') foot strip. The seal slides into the track (channel) attached to the glass that goes all the way around the windshield and creates a seal when the glass is pressed against the body of the vehicle.
Gearshift Boot - Pistol Grip Shifter
p/n: 82-0222-24
This Shifter Boot is designed from the original part for the famous Dodge and Plymouth Pistol Grip Shifter. Found on floor mounted manual transmission models. Realistic leather grain pattern.
U Jamb Lock Pillar Filler
p/n: 70-2549-79
Door lock pillar seal. This part seals the bottom of the rear side window, and may also be known as a door jamb seal.
Windshield Stanchion Base Pad
p/n: 40-0079-52
Pads, windshield stanchion mounting. Perfect copy, including concave bottom face to properly fit cowl, right and left.Length: 3.125 inches.
Door Weatherstrip End Cap
p/n: 70-1684-73
Seal or End cap, door weatherstrip end. Fully molded with original type metal core. See our #70-1683-72 for main weatherstrip.Width: 4.25 inches.
Trunk Weatherstrip
p/n: 70-3044-84
This Trunk Weatherstrip is designed from the original part for superior fitment and seal. The weatherstrip mounts around the full perimeter of the trunk directly to the body.
Side Window Glass Run Channels
p/n: 70-3901-57
This four (4) piece Side Window Glass Run Channel set is for the left and right doors. Manufactured with high-quality materials these run channels are designed from the originals for superior performance and a factory like fit.
Front Door Vent Window Weatherstrips
p/n: 70-3704-55
These Front Door Vent Window Weatherstrips are designed from the original parts for superior fitment and seal. The pieces are molded as left and right and are one piece with the division post seal.
Swing-Out Windshield Weatherstrip
p/n: 40-0036-52
This Swing-Out Windshield Weatherstrip comes in an eleven (11') foot strip. The seal slides into the track (channel) attached to the glass that goes all the way around the windshield and creates a seal when the glass is pressed against the body of the vehicle.
U Jamb lock pillar filler
p/n: 70-2758-79
Door lock pillar seal. This part seals the bottom of the rear side window, and may also be known as a door jamb seal.
Tailgate Weatherstrip
p/n: 70-2402-85
This tailgate weatherstrip is designed from the original part for superior fitment and seal. The seal mounts on the sides and bottom of the tailgate.
Trunk Weatherstrip
p/n: 70-1691-84
This Trunk Weatherstrip is designed from the original part for superior fitment and seal. The weatherstrip mounts around the full perimeter of the trunk directly to the body.
Large Stationary Quarter Window Weatherstrip
p/n: 70-4165-77
This Stationary Window Weatherstrip is designed from the original part for superior fitment and seal. This window weatherstrip fits between the stationary glass and vehicle body for larger quarter windows.
Handbrake Floorplate
p/n: 40-0106-24
Floorplate, handbrake. Black rubber. For brown see our #40-0106-89. Metal core as original. Flat plate, can be bent as required.Length: 6.50 inches.
Swing-Out Windshield Weatherstrip
p/n: 70-0057-52
This Swing-Out Windshield Weatherstrip is designed from the original part for superior fitment, finish and sealing function. This windshield weatherstrip is common for most Chrysler models. May also be found in DeSoto, Dodge and Plymouth models. Also used in Packard and Studebaker models.
Engine Mount Service – Revulcanization Only
p/n: 70-2666-11
This Revulcanization Service Only is designed to restore your Front Engine Support Mount to a like new original condition. Service requires your metal core. Please call or email for more service details and ordering.
Front Door Weatherstrip Set
p/n: 40-0495-73
This four (4) piece Front Door Weatherstrip set is designed from the original parts for superior fitment and seal. These primary door weatherstrips mount (glue-on) directly to the left and right doors sealing the full perimeter of the doors against the vehicle body when the door is closed.
Vent Window Weatherstrip
p/n: 40-0502-57
This Vent Window Weatherstrip is a cushion for under the vent window frames. Measures 4.375 inches in Length. Sold as a pair.