Search Results
Please click on the part name in red in order to get a complete description.
Front door weatherstrip
p/n: 70-3539-72
Front door weatherstrip seals with two (2) molded corners and clips like originals.
Handbrake floorplate
p/n: 40-0109-24
Floorplate, handbrake. Black rubber. For brown see our #40-0109-89. Brass core, made flat, to be bent as required.Length: 7.25 inches.
Motor mount service
p/n: 40-0410-11
Front motor mount. Revulcanization service only. Send in core and allow three weeks for service. 6 cylinders only.
Windshield Gasket
p/n: 70-2443-50
This windshield gasket mounts around the full perimeter of the front glass and has the divider bar molded directly into it. It has properly molded corners to precisely conform to the glass and fit the windshield just like original.
Front bumper grommet
p/n: 40-0057-30
Grommets, front bumper. Fully molded rubber, inside hole slightly rectangular. Four and one half inche (4-1/2") length by three and three eighths inch (3-3/8") width by one and three eighths inch (1-3/8") inside hole length by one and one fourth inch (1-1
Handbrake Floorplate, Brown
p/n: 40-0298-89
Floorplate, handbrake lever hole cover pad. Brown rubber. For black see our #40-0298-24.
Headlight bracket pad
p/n: 40-0189-14
Seal, headlight bracket, with brass core.Length: 5.0625 inches.
Door weatherstrip end cap
p/n: 70-3149-73
End cap, front door weatherstrip cover. Fully molded with with metal core just like the original.Width: 4.0 inches.
Windshield filler
p/n: 40-0266-52
Bumpers, windshield frame to pillar. Closed bodies with split windshield. 2 rights and 2 lefts required per car. Four (4) piece set.Length: 2.25 inches.
Front Door Vent Window Weatherstrips
p/n: 70-3722-55
These front door vent window seals are designed from the original parts for superior fitment and seal. The pieces are molded as left and right and are one piece with the division post seal.
Trunk Weatherstrip
p/n: 70-0083-85
This trunk weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.
Bumper grommet
p/n: 40-0047-30
Grommets, front and rear bumpers, right and left. Fully molded rubber. Four and one fourths inch (4-1/4") outside length by three inches (3") outside width by one and five eighths inch (1-5/8") inside hole length by one half inch (1/2") inside hole width
Taillight gasket kit
p/n: 70-2632-15
Gasket and welt, tail light assembly. Set includes lens gasket and welt for housing.
Bumper grommet
p/n: 40-0048-30
Grommets, bumper. Some front and some rear, right and left. Fully molded rubber. Three and thirteen sixteenths inch (3-13/16") outside length by three and one fourth inch (3-1/4") outside width by one and three fourths (1-3/4") inside hole length by seven
Windshield Weatherstrip
p/n: 40-0329-50
This swing-out windshield gasket is designed from the original part for superior fitment and seal. The seal mounts into the metal channel attached to the glass and creates a seal when the glass is pressed against the body of the vehicle. It has vulcanized, or bonded, ends which means no cutting or splicing is required for installation.
Handbrake Floorplate, Brown
p/n: 40-0110-89
Floorplate, handbrake. Brown rubber. Steel core as original.
Accelerator pedal pad
p/n: 40-0201-40
Pad, accelerator pedal. Black rubber. For brown see our #40-0201-89. Revulcanization service only.Length: 8.75 inches. Width: 2.0625 inches.
Front bow weatherstrip
p/n: 70-2296-64
Weatherstrip, windshield header bow to convertible top. Fully molded, exact original profile configuration with attached molded ends.
Door weatherstrip end cap
p/n: 70-2053-79
Weatherstrip, door seal end cap or filler. Fully molded with metal core.
Hardtop roof rail weatherstrip
p/n: 70-1568-68
Hardtop roof rail weatherstrip. This part fits on the roof of the vehicle and seals the side window when the window is fully raised.
Accelerator pedal service
p/n: 70-1806-40
Accelerator pedal. Black rubber. For brown see our #70-1806-89. Revulcanization service only.
Handbrake floorplate
p/n: 40-0110-24
Floorplate, handbrake. Black rubber. For brown see our #40-0110-89. Brass core as original.Length: 6.6875 inches.
Window felt weatherstrip
p/n: 80-0592-57
Standard material style side window horizontal seal kit (also known as beltline weatherstrip). Four (4) piece kit includes inner and outer felt beltline weatherstrip for both doors. (Note: these are for 1976- 1979 1/2 yr and are STRAIG
Swing-out Windshield Weatherstrip
p/n: 70-0057-52
This swing-out windshield weatherstrip comes in an twelve foot (12') strip and mounts into the metal channel attached to the glass. The rubber slides into the T-groove and creates a seal when the glass is pressed against the body of the vehicle.
Fixed quarter window gasket
p/n: 70-3559-77
Weatherstrip, rear stationary quarter window. Made with proper extruded cross sections and molded corner sections just like original.
Trunk Weatherstrip
p/n: 70-1691-84
This trunk weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.
Tailgate Weatherstrip
p/n: 70-2402-85
This tailgate weatherstrip is designed from the original part for superior fitment and seal. The seal mounts on the sides and bottom of the tailgate.
Side window leading edge
p/n: 40-0371-80
Side window vertical leading edge weatherstrip (1952-1st type) This part attaches to the vertical edge of the rear side windows when the rear side windows are fully raised. Molded authentic rubber construction with metal core, this part does not include t
Front Door Vent Window Weatherstrips
p/n: 70-3704-55
These front door vent window seals are designed from the original parts for superior fitment and seal. The pieces are molded as left and right and are one piece with the division post seal.
Door weatherstrip end cap
p/n: 70-1684-73
Seal or End cap, door weatherstrip end. Fully molded with original type metal core. See our #70-1683-72 for main weatherstrip.Width: 4.25 inches.
Windshield stanchion base pad
p/n: 40-0079-52
Pads, windshield stanchion mounting. Perfect copy, including concave bottom face to properly fit cowl, right and left.Length: 3.125 inches.
U Jamb lock pillar filler
p/n: 70-2758-79
Door lock pillar seal. This part seals the bottom of the rear side window, and may also be known as a door jamb seal.
U Jamb lock pillar filler
p/n: 70-2549-79
Door lock pillar seal. This part seals the bottom of the rear side window, and may also be known as a door jamb seal.
Swing-out Windshield Weatherstrip
p/n: 40-0033-52
This swing-out windshield weatherstrip comes in an eleven foot (11') strip and mounts into the metal channel attached to the glass. The rubber slides into the T-groove and creates a seal when the glass is pressed against the body of the vehicle.
Trunk Weatherstrip
p/n: 70-3044-84
This trunk weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.
Door weatherstrip end cap
p/n: 70-2592-73
Weatherstrip, door seal end cap or filler. Fully original molded type with metal core. Order perimeter weatherstrip #40-0489-73 separately.
U Jamb lock pillar filler
p/n: 70-2047-79
Door lock pillar seal. This part seals the bottom of the rear side window, and may also be known as a door jamb seal.
Swing out windshield seal
p/n: 40-0171-52
Weatherstrip, swing out windshield. Three (3) piece set, consisting of stationary seal for bottom and sides.
Windshield Weatherstrip Set
p/n: 70-1853-52
This swing-out windshield weatherstrip set includes the bottom seal and the strip that runs around the top and sides. Both pieces are mounted to the body of the vehicle and create a seal when the glass is pressed against the body.
Spare wheel carrier grommet
p/n: 40-0254-37
Grommet, rear spare wheel carrier bracket hole. Two (2) per car.Length: 4.1875 inches.
U Jamb lock pillar filler
p/n: 70-2347-79
Door lock pillar seal. This part seals the bottom of the rear side window, and may also be known as a door jamb seal.
U Jamb lock pillar filler
p/n: 70-1591-79
Door lock pillar seal. This part seals the bottom of the rear side window, and may also be known as a door jamb seal.
Door weatherstrip
p/n: 40-0538-73
Weatherstrip, door bottom, four (4) door. For two (2) door see our #40-0537-73. Held to door by steel strip. Sponge type as original.Width: 1.375 inches.
Trunk Weatherstrip
p/n: 70-1129-84
This trunk weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk lid.
Headlight bracket pad
p/n: 40-0218-14
Pad, headlight to bracket without steel core.Length: 5.125 inches.
Motor Mount
p/n: 40-0428-11
Rear motor mount. Revulcanization service only. For Standard Transmission and SIX (6) Cylinder Only.
Front bumper grommet
p/n: 40-0122-30
Grommets, front bumper. Hollow construction for good fit. Fully molded rubber. Four and five eighths inch (4-5/8") outside length by three and one fourth inch (3-1/4") outside width by one and one half inch (1-1/2") inside hole length by one half inch (1/
Rear spare wheel carrier seal
p/n: 40-0141-37
Grommet, rear spare wheel carrier.Some models require 3 pieces (1-1/2 prs).Length: 3.375 inches.
Trunk Weatherstrip
p/n: 70-3047-84
This trunk weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.
Trunk Weatherstrip
p/n: 70-3046-84
This trunk weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.
Front Door Vent Window Weatherstrips
p/n: 70-2702-55
These front door vent window seals are designed from the original parts for superior fitment and seal. The pieces are molded as left and right and are one piece with the division post seal.
Sliding Side Door weatherstrip
p/n: 70-3258-72
Sliding Door edge weatherstrip. This part is the primary door to body weatherstrip for sliding door. Dual duometer with proper cross section. Push-on type that attaches to the pinch weld.
Trunk Weatherstrip
p/n: 70-3051-84
This trunk weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.
Trunk Weatherstrip
p/n: 70-3045-84
This trunk weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.
Brown brake and clutch pad
p/n: 40-0121-89
Pads, brake and clutch pedal. Brown rubber. For black see our #40-0121-22. Oval style, perfect copy.
Brown accelerator service
p/n: 70-1806-89
Accelerator pedal. Brown rubber. For black see our #70-1806-40. Revulcanization service only.
Fender welting 50ft chrome
p/n: 70-1102-44
Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five (25) foot roll see #70-1101-44.
Fender welting 3/16 bead 50ft
p/n: 70-1100-44
Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide, three sixteenths (3/16) inch, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty fi
Fender welting 1/4" bead 50ft
p/n: 70-1098-44
Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide. One fourth (1/4) inch bead, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five
Door Weatherstrip End Cap Filler
p/n: 70-1620-73
This End Cap Filler, Door Weatherstrip is designed from the original part for superior fitment and seal. Pre-drilled holes for easy installation. These premium seals have a corrosion resistant brass metal core.
Front suspension bumper
p/n: 40-0251-32
Bumper, front suspension, upper arm. Two (2) per car.Length: 1.75 inches. Height: 1.625 inches.
Brown accelerator pedal pad
p/n: 40-0201-89
Pad, accelerator pedal. Brown rubber. For black see our #40-0201-40. Revulcanization service only.Length: 8.75 inches. Width: 2.0625 inches.
Hood to radiator weatherstrip
p/n: 70-2375-43
Weatherstrip, hood to radiator. Proper rubber cross section with pre-drilled holes, cut outs and included attaching clips.
Hood to radiator weatherstrip
p/n: 70-2379-43
Weatherstrip, hood to radiator. Proper rubber cross section with pre-drilled holes, cut outs and included attaching clips.Length: 51.25 inches.
Hood to radiator weatherstrip
p/n: 70-2371-43
Weatherstrip, hood to radiator. Proper rubber cross section with pre-drilled holes, cut outs and included attaching clips.Length: 51.0 inches.
Hood to radiator weatherstrip
p/n: 70-2380-43
Weatherstrip, hood to radiator. Proper rubber cross section with pre-drilled holes, cut outs and included attaching clips.Length: 50.5 inches.
Hood to radiator weatherstrip
p/n: 70-2376-43
Weatherstrip, hood to radiator. Proper rubber cross section with pre-drilled holes, cut outs and included attaching clips.
Hood To Cowl Weatherstrip
p/n: 70-2391-43
Weatherstrip, hood to cowl. Proper rubber cross section with pre-inserted attaching clips.Length: 47.50 inches. Width: .6875 inches.
Hood to radiator weatherstrip
p/n: 70-2370-43
Weatherstrip, hood to radiator. Proper rubber cross section with pre-drilled holes, cut outs and included attaching clips.Length: 51.0 inches.
Hood to cowl weatherstrip
p/n: 70-2390-43
Weatherstrip, hood to cowl. Proper rubber cross section with pre-inserted attaching clips.Length: 43.25 inches. Width: .6875 inches.
Hood to radiator weatherstrip
p/n: 70-2374-43
Weatherstrip, hood to radiator. Proper rubber cross section with pre-drilled holes, cut outs and included attaching clips.Length: 51.50 inches.
Hood to radiator weatherstrip
p/n: 70-2384-43
Weatherstrip, hood to radiator. Proper rubber cross section with pre-drilled holes, cut outs and included attaching clips.Length: 62.0 inches.
Hood to radiator weatherstrip
p/n: 70-2382-43
Weatherstrip, hood to radiator. Proper rubber cross section with pre-drilled holes, cut outs and included attaching clips.Length: 37.375 inches.
Hood to radiator weatherstrip
p/n: 70-2372-43
Weatherstrip, hood to radiator. Proper rubber cross section with pre-drilled holes, cut outs and included attaching clips.Length: 50.75 inches.
Hood to radiator weatherstrip
p/n: 70-2383-43
Weatherstrip, hood to radiator. Proper rubber cross section with pre-drilled holes, cut outs and included attaching clips.Length: 61.75 inches.
Hood to radiator weatherstrip
p/n: 70-2381-43
Weatherstrip, hood to radiator. Proper rubber cross section with pre-drilled holes, cut outs and included attaching clips.Length: 50.50 inches.
Hood to radiator weatherstrip
p/n: 70-2373-43
Weatherstrip, hood to radiator. Proper rubber cross section with pre-drilled holes, cut outs and included attaching clips.Length: 51.25 inches.
Hood to radiator weatherstrip
p/n: 70-2377-43
Weatherstrip, hood to radiator. Proper rubber cross section with pre-drilled holes, cut outs and included attaching clips.
Brown brake and clutch pad
p/n: 40-0107-89
Pads, brake and clutch pedal. Brown rubber. For black see our #40-0107-22. Full slip over type to fit old pedal.
Rear bumper grommet
p/n: 40-0363-30
Grommet, rear bumper to body, right and left. Fully molded rubber. Four and one fourths inch (4-1/4") length by two and three eighths inch (2-3/8") at widest end by one and eleven sixteenths inch (1-11/16") inside hole length by nine sixteenths inch (9/16
Front bumper grommet
p/n: 40-0301-30
Grommets, front bumper. Fully molded rubber. Four inches (4") outside length by one and five sixteenths inch (1-15/16") outside width by one and five eighths inch (1-5/8") inside hole length by one half inch (1/2") inside hole width by one and three eight
U Jamb lock pillar filler
p/n: 82-0196-79
Door lock pillar seal. This part seals the bottom of the rear side window, and may also be known as a door jamb seal.
U Jamb Lock Pillar Filler
p/n: 70-3887-79
This part seals the bottom of the rear side window. This fully molded authentic rubber part features a galvanized steel core with proper mounting hole placement.
Headlight mounting pad
p/n: 40-0270-14
Pads, headlight bracket mounting, right and left.Length: 7.625 inches.
U Jamb lock pillar filler
p/n: 70-1450-79
Door lock pillar seal. This part seals the bottom of the rear side window, and may also be known as a door jamb seal.
Hood to radiator weatherstrip
p/n: 70-2369-43
Weatherstrip, hood to radiator. Proper rubber cross section with pre-drilled holes and included attaching clips.
Hood to radiator weatherstrip
p/n: 70-2368-43
Weatherstrip, hood to radiator. Proper rubber cross section with pre-drilled holes and included attaching clips.
Fuel neck grommet
p/n: 70-2286-39
Grommet, fuel filler neck. Fully molded rubber, angled. Four and three sixteenths inch (4 3/16") outside width by four and three eighths inch (4 3/8") outside diameter by two and one fourth inch (2 1/4") top hole diameter by one and fifteen sixteenths in
Front bumper grommet
p/n: 40-0195-30
Grommet, front bumper. Three and one half inch (3-1/2") inch diameter by one and three fourths inch (1-3/4") inside hole diameter by five eighths inch (5/8") height.
Fuel neck grommet
p/n: 40-0161-39
Grommet, fuel filler neck includes retainer flange. Oblong fully molded rubber. Two and three sixteenths inch (2-3/16") inside diameter by four inch (4") outside length.
Front bumper grommet
p/n: 40-0216-30
Grommets, front bumper. Fully molded rubber. Three and thirteen sixteenths inch (3-13/16") outside length by two and one fourth inch (2-1/4") outside width by one and eleven sixteenths inch (1-11/16") inside hole length by one half inch (1/2") inside hole
Brown steering column grommet
p/n: 40-0144-89
Grommet, steering column to toe board. Brown rubber. For black see our #40-0144-36. Two and three fourths (2-3/4) inch by seven and one half (7-1/2) inch.