Front Door Hinge Pillar Weatherstrips
p/n: 70-0552-73
This Front Door Hinge Pillar Weatherstrip pair is designed from the original parts for superior fitment and seal. The pair attaches above the beltline, hinge pillar windshield post. These two (2) strips with pre-installed clips, one for each door, are manufactured for a factory like fit.
Hood To Radiator Weatherstrip
p/n: 70-4889-43
This Hood To Radiator Weatherstrip is designed from the original part for superior fitment and seal. An exact reproduction of the original profile. This weatherstrip installs at the front of the engine bay to seal between the radiator support / grill and seals against the hood.
Hood To Radiator Weatherstrip
p/n: 70-4890-43
This Hood to Radiator Weatherstrip is designed from the original part for superior fitment and seal. An exact reproduction of the original profile. This weatherstrip installs at the front of the engine bay to seal between the radiator support / grill and seals against the hood.
Hood To Fender Weatherstrips
p/n: 70-0540-42
This Hood To Fender Weatherstrip pair is a quality reproduction of the original factory part. An exact copy of the original profile. Approximately thirty-six (36) inches long.
Peel-N-Stick Trunk Weatherstrip
p/n: 70-0773-WT
This Steele exclusive Peel-N-Stick Trunk Weatherstrip is designed from the original part for superior fitment and seal. This easy to install weatherstrip mounts around the full perimeter of the trunk directly to the body.
Vent division bar weatherstrip
p/n: 20-0021-56
Front vent window division post seal. Fully molded with metal core and attaching tabs.
Cowl Vent Gasket
p/n: 60-0081-54
This Cowl Vent Gasket is designed from the original part for superior fitment and seal. This gasket works to seal the cowl vent when closed into the cowl body. Made from top quality rubber to ensure durability and proper seal.
Convertible A-Pillar Post Weatherstrips
p/n: 20-1912-63
This Convertible A-Pillar Post Weatherstrip pair is designed from the original part for superior fitment and sealing.. These windshield post weatherstrips attach to the body to seal between the A-pillar post and the front section of the door or vent window frame when the door is closed.
Cowl To Fender Weatherstrips
p/n: 20-0220-44
This reproduction Cowl To Fender Weatherstrip pair is designed from the original part for an authentic fit, finish and function. Fits to the cowl side panel to fender. Includes fasteners.
Hood to Cowl Weatherstrip
p/n: 20-0216-43
This Hood to Cowl Weatherstrip is designed from the original part for superior fitment and seal. An exact reproduction of the original Ford part using dense rubber with pre-installed fastener clips.
Hood to Cowl Weatherstrip
p/n: 20-0215-43
This Hood to Cowl Weatherstrip is designed from the original part for superior fitment and seal. An exact reproduction using the correct profile dense rubber extrusion.
Outer Beltline Weatherstrips - 44 Inch Pair
p/n: 70-5191-61
A pair of forty-four (44) inch long Outer Beltline Weatherstrips. Chrome edge metal spine with rubber lip and a flocked surface for glass to slide on. Typically used as outer window felt beltline moldings for front door windows, rear door windows or quarter windows for Street Rods and Customs.
Window Felt Beltline Weatherstrips - 44 Inch Pair
p/n: 70-5190-57
These 11/16" wide general use side window horizontal weatherstrips are thick pile felt lined and without a chrome bead. A forty-four (44) inch pair.
Window Felt Beltline Weatherstrips
p/n: 80-1024-57
This four (4) piece inner and outer Window Felt Beltline Weatherstrip set is for both driver and passenger front doors. These beltline moldings mount on the top inner and outer part of the door to wipe the side windows when the glass is lowered.
Hood To Cowl Weatherstrip
p/n: 50-0486-43
This Hood To Cowl Weatherstrip is designed from the original part for superior fitment and seal. An exact reproduction of the original profile. This weatherstrip installs at the rear of the engine bay to seal between the hood and vehicle body cowl.
Peel-N-Stick Trunk Weatherstrip
p/n: 20-1389-WT
This Peel-N-Stick Trunk Weatherstrip is designed for superior fitment and seal. The weatherstrip mounts around the full perimeter of the trunk lid. Easy to install 3M Peel-N-Stick backing provides superior adhesion for reliable performance.
11/16" Peel-N-Stick Weatherstrip - 10ft
p/n: 83-0135-73
Peel-N-Stick weatherstrip. Top-quality extrusion with bonded self adhesive strip. Available in 10ft lengths.
Auxiliary Door to Body Weatherstrip
p/n: 70-4081-73
This Auxiliary Door to Body Weatherstrip is designed from the original part for superior fitment and seal. This seal mounts directly to the body over the front or rear door to seal against the top of the door.
Hood to Radiator Weatherstrip
p/n: 40-0512-42
Weatherstrip, hood to grill or radiator shroud. Two (2) pieces, each sixteen (16) inches.Width: 1.3125 inches.
Peel-N-Stick Hatch & Door Seal
p/n: 83-0137-477
This sponge rubber weatherstrip provides a positive seal to access doors, crew compartments, and storage lockers. Available in 10ft lengths.
Roof Side Rail Weatherstrip
p/n: 20-3090-62
Seals, roof side rail center. Installs on roof rail where quarter window rolls up to back of front door glass.
Side Window Vertical Leading Edge
p/n: 82-0019-80
This Side Window Vertical Leading Edge Weatherstrip pair is designed from the original part for superior fitment and seal. This part attaches to the vertical edge of the rear side windows when the rear side windows are fully raised.
Vent division bar weatherstrip
p/n: 20-3040-56
Front vent window division post seal. Fully molded with metal core and attaching tabs.
Vent division bar weatherstrip
p/n: 20-3042-56
Front vent window division post seal. Fully molded with metal core and attaching tabs.