Side Window Vertical Leading Edge
p/n: 20-3126-80
Side window vertical leading edge weatherstrip. Cut to length. NOT cloth covered. This part attaches to the vertical edge of the rear side windows when the rear side windows are fully raised. Designed from the original part for superior fitment and seal.
Hood To Radiator Weatherstrip
p/n: 70-3351-43
This Hood To Radiator Weatherstrip is designed from the original part for superior fitment and seal. The weatherstrip has the proper rubber cross section.
Lower Door Weatherstrip Retainers
p/n: 20-0393-73
This Lower Door Weatherstrip Retainer pair is designed from the original part for superior fitment, finish and function. A pair of retainers for the lower door weatherstrips that mount on the left and right rocker sills. Does not include door weatherstrips.
Vent Window Division Bar Weatherstrips
p/n: 20-0709-56
This Front Vent Window Division Bar / Post Weatherstrip pair is designed from the original part for superior fitment and seal. This piece mounts with rivets on the vertical division bar and seals as the vent window glass closes against it.
Trunk Decklid Weatherstrip
p/n: 20-2858-84
This Trunk Deckid Weatherstrip is designed from the original part for superior fitment and seal. The weatherstrip mounts around the full perimeter of the trunk lid.
Rear Sliding Window Lower Weatherstrip
p/n: 70-5134-83
This reproduction Sliding Rear Window Lower Weatherstrip is designed from the original part for an authentic fit, finish and function. This flocked dense rubber weatherstrips fits at the bottom of the rear window sliding glass.
Firewall To Hood Weatherstrip - Cowl Lacing
p/n: 70-3137-43
This Firewall To Hood Weatherstrip - Cowl Lacing is designed from the original part for superior fitment and seal. This weatherstrip installs at the rear of the engine bay to seal between the hood and vehicle body cowl.
Back Edge of Vent Window Posts Weatherstrips
p/n: 20-0470-56
This Back Edge of Vent Window Posts Weatherstrip pair is fully molded in high-quality rubber and with a metal core. This part fits opposite the glass run channel and seals the vent window when the vent is closed. Part installs using the included rivets.
Quarter Window Leading Edge
p/n: 70-0141-119
A high quality Quarter Window Vertical Leading Edge weatherstrip for your Street Rod or Custom Build project. The seal pair slides into metal retaining channel attached to rear side window and seals between the front door window and the rear quarter window. Available as a pair.
Removable Top Front Weatherstrip - On Fiberglass Roof
p/n: 70-2999-68
This Removable Top Front Weatherstrip is designed from the original part for superior fitment and sealing. This weatherstrip installs directly on the front of the fiberglass roof shell with weatherstrip adhesive glue (not included) and presses against the metal roof cab weatherstrip.
Engine Top Cover Weatherstrip
p/n: 70-3531-88
This Engine Top Cover Weatherstrip is an original design reproduction made from top quality sponge rubber. This gasket attaches between the removable engine cover ("doghouse") and the vehicle firewall/floorboard.
Unbeaded Rubber Channel 72"
p/n: 70-3576-58
Use anywhere a mohair-lined channel is needed to eliminate rattle, provide a smooth sliding surface and protect glass. Available in 72" lengths.
Convertible and T-Top Retainer Weatherstrip
p/n: 20-2805-67
This Convertible and T-Top Retainer Weatherstrip fits between the body and the metal retainer that holds the weatherstrip in place. One (1) roll per vehicle.
Tailgate Lower Weatherstrip
p/n: 20-2623-85
This Tailgate Lower Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts on the bottom of the tailgate.
Top Of Door Weatherstrips
p/n: 20-2113-73
This Top Of Door Weatherstrip pair is designed from the original part for superior fitment and seal. These primary door weatherstrips mount (glue-on) to the body to seal the door top when the door is closed. Two (2) and four (4) door models.
Trunk Weatherstrip
p/n: 20-2620-84
This Trunk Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts to the lip on the body surrounding the trunk opening.
Dense Window Beltline
These general use side window horizontal weatherstrips are made of a durable dense rubber and feature our Peel-N-Stick backing. Available in 5ft, 10ft, and 15ft lengths.
Dense Window Beltline
These general use side window horizontal weatherstrips are made of a durable dense rubber and feature our Peel-N-Stick backing. Available in 5ft, 10ft, and 15ft lengths.
Front Inner Fender to Hood Weatherstrip
p/n: 82-0159-45
A Front Inner Fender To Hood Weatherstrip made with the proper cross section of rubber like the original for durability and a like factory seal. Fits over the inner fender panel and seals to hood assembly. Sold individually, two (2) per vehicle required.
Hood To Side Fender / Rear Hatch Side / Front Upper Bumper Weatherstrips
p/n: 70-4702-44
A reproduction weatherstrip pair with multi-use function. Works as the Hood To Side Fender Weatherstrip pair on 97-04 models OR the Rear Hatch Side Weatherstrip pair OR the Front Bumper Upper Weatherstrip pair on 05-13 models. Cut-To-Length and Peel-N-Stick for easy installation.
Trunk Bumper
p/n: 70-0296-87
T-nut, trunk bumper in gutter at sides, brass core tapped 10-32 thread. Two (2) required per car. For models having partial weatherstrip in gutter of body.
Unbeaded Rubber U-Channel 96"
p/n: 70-3579-58
Use anywhere a mohair-lined channel is needed to eliminate rattle, provide a smooth sliding surface and protect glass. Available in 96" lengths.
Cowl End Weatherstrips
p/n: 70-5166-45
This Cowl End Weatherstrip pair is designed from the original part for superior fitment and function. These weatherstrips fit to either side of the cowl and come as a left and right pair.