Peel-N-Stick Trunk Weatherstrip - Low Profile
p/n: 70-5250-WT
This low-profile Trunk Weatherstrip with Peel-N-Stick backing mounts around the full perimeter of the trunk directly to the body. This "problem solver" weatherstrip provides for easier trunk closure. Easy to install 3M Peel-N-Stick backing provides superior adhesion for reliable performance.
Clutch and Brake Pedal Pads
p/n: 70-5219-22
This reproduction Clutch and Brake Pedal Pad pair slips over the full perimeter of the pedal for a precise, factory fit. A perfect reproduction to replace worn original pedal pads. Manufactured in quality black rubber.
Lower Radiator Filler Strip - w/Clips
p/n: 70-5162-31
This Lower Radiator Filler Strip is designed from the original part for superior fitment and function. This filler piece is die cut from quality 3/32" thick fiber reinforced rubber to authentic original dimensions.
Sunroof Metal Retaining Clips w/Hardware
p/n: 70-5223-45
This pair of metal retaining clips includes #6 self-tapping screws with washers, providing everything needed for a secure, rivet-free installation. Designed as direct replacements for the factory roof panel clips used on the sunroof tabs, each clip is made from durable, black-painted metal for long-lasting performance.
Windshield Molding
p/n: 70-5117-52
This four-side Windshield Molding reproduction is designed from the original part for an authentic fit, finish and appearance.
Window Beltline Molding Remover Tool - Small
p/n: 94-3524-94
This small Window Beltline Molding Remover has a unique flared head design and beveled edges to allow the tool to be inserted under the molding at an angle. Tool quickly removes the belt molding without damage to the window or the molding. Fits most domestic and import vehicles.
Hood To Cowl Weatherstrip
p/n: 70-5148-43
This Hood To Cowl Weatherstrip is designed from the original part for superior fitment and seal. This weatherstrip installs at the rear of the engine bay to seal between the hood and vehicle body cowl.
Hard Top Side Weatherstrips - Removable Top
p/n: 70-5119-68
This Hard Top Side Weatherstrip pair is designed from the original part for superior fitment and seal. These sponge rubber weatherstrips mount on the driver and passenger body rail sides of the shell.
Splash Apron / A-Arm Dust Shield Fillers
p/n: 70-5150-45
This two (2) piece Splash Apron / A-Arm Dust Shield Filler pair is designed from the original part for superior fitment and seal. Filler pieces are die cut from quality 3/32" thick fiber reinforced rubber to authentic original dimensions.
Rear Cargo Doors Push-Out Window Weatherstrip
p/n: 70-5221-76
This Push-Out Window Weatherstrip mounts around the full perimeter of the glass and will flex around the window corners. A replacement for the original part offering a precise fit.
Hood To Cowl - Lacing Weatherstrip
p/n: 70-5176-43
This Hood To Cowl Weatherstrip is designed from the original part for superior fitment and seal. This push-on weatherstrip installs at the rear of the engine bay to seal between the hood and vehicle body cowl.
5" Wide Black Bow Drill Cloth - No Adhesive
p/n: 70-5128-65
This Black Bow Drill Cloth is used for covering convertible side window weatherstrip. This material measures five (5) inches by five (5) foot roll. There is no adhesive on this material.
Inner Beltline Weatherstrip - 44 Inch
p/n: 70-5193-61
A forty-four (44) inch long Inner Beltline Weatherstrip. For use on front, rear and quarter windows. Chrome edge metal spine with rubber lip and a flocked surface for glass to slide on. Excellent for use on fiberglass bodied vehicles.
Fuel Tank To Filler Pipe Hose - Auxiliary Tank
p/n: 70-5195-41
This Fuel Tank To Filler Pipe Hose is designed from the original part for superior fitment and function. This fuel resistant rubber molded hose connects the auxiliary fuel tank to the filler pipe.
Inner Beltline Weatherstrips - 44 Inch Pair
p/n: 70-5192-60
A pair of forty-four (44) inch long Inner Beltline Weatherstrips. These high-quality strips function to wipe the side windows when the glass is lowered. Typically used for inner window felt beltline moldings for front door windows, rear door windows or quarter windows for Street Rods and Customs.
Side Mirror Mounting Pads
p/n: 70-5225-45
This Side Mirror Mounting Pad pair is designed from the original part for superior fitment and function. These mirror mounting pads for the Fiero are designed for a precise fit on either the left or right-side mirror and feature an exact 3-hole pattern for proper alignment.
Splash Apron / A-Arm Dust Shield Fillers
p/n: 70-5151-45
This two (2) piece Splash Apron / A-Arm Dust Shield Filler pair is designed from the original part for superior fitment and seal. Filler pieces are die cut from quality 3/32" thick fiber reinforced rubber to authentic original dimensions.
Taillight Lens and Housing Gasket Set
p/n: 70-5156-15
This Taillight Lens and Housing Gasket Set is designed from the original part for superior fitment and seal. Reproduction gaskets that fit between taillight lens to taillight housing and taillight housing to body.
Rear Spoiler Mounting Pads
p/n: 70-5226-87
This Rear Spoiler Mounting Pad pair is designed from the original part for superior fitment and function. These pads are designed to fit perfectly between the factory spoiler and the engine deck lid.
Radiator Filler Strip
p/n: 70-5161-31
This Radiator Filler Strip is designed from the original part for superior fitment and function. This filler piece is die cut from quality 3/32" thick fiber reinforced rubber to authentic original dimensions.
Upper Door Drip Rail Weatherstrip - Extended Cab
p/n: 70-5177-73
This Upper Door To Body Drip Rail Weatherstrip is designed from the original part for superior fitment and seal. This weatherstrip mounts directly to the body over the front or rear door to seal against the top of the door on extended cab pickup truck models.
Turn Signal Light Lens Gaskets
p/n: 70-5154-16
This Turn Signal Light Lens Gasket pair is designed from the original part for superior fitment and seal. This reproduction gasket fits between the Turn Signal Light Lens and the Light Housing or Bezel.
Clip and Molding Removal Tool Set
p/n: 94-6994-94
A five (5) piece Clip and Molding Removal Tool Set used for all types of trim removal including side molding, window trim, door handle trim, grill trim and bumper moldings. Made of glass reinforced nylon. Neon orange for visibility.
Rear Sliding Window Lower Weatherstrip
p/n: 70-5134-83
This reproduction Sliding Rear Window Lower Weatherstrip is designed from the original part for an authentic fit, finish and function. This flocked dense rubber weatherstrips fits at the bottom of the rear window sliding glass.
Window Beltline Molding Remover Tool
p/n: 94-3515-94
The Window Beltline Molding Remover Tool quickly removes the belt molding without damage to the window or the molding. Fits most domestic and import vehicles.
Tailgate Upper Corner End Caps
p/n: 70-5202-87
This Tailgate Upper Corner Caps pair is designed from the original part for an authentic fit, finish, and appearance. Left and Right side molded black rubber caps that mount in the upper corners of tailgate.
Door Striker Plate w/Shims
p/n: 70-5263-70
This reproduction Door Striker Plate pair is designed from the original part for an authentic fit, finish, function and appearance. Zinc plated steel plate for left or right side.
Door Hinge Dust Covers - w/Clips
p/n: 70-5157-70
This LH and RH Door Hinge Dust Cover pair is designed from the original part for superior fitment and function. Filler pieces are die cut from quality 3/32" thick fiber reinforced rubber to authentic original dimensions.
Cowl End Weatherstrips
p/n: 70-5166-45
This Cowl End Weatherstrip pair is designed from the original part for superior fitment and function. These weatherstrips fit to either side of the cowl and come as a left and right pair.
2-1/2" Wide Black Bow Drill Cloth - No Adhesive
p/n: 70-5129-65
This Black Bow Drill Cloth is used for covering convertible side window weatherstrip. This material measures two and one half (2-1/2) inches by five (5) foot roll. There is no adhesive on this material.
Door Panel Clip Remover Tool
p/n: 94-3535-94
The Door Panel Clip Remover Tool quickly removes door panel card fasteners. The bent handle design allows use where space is limited and provides extra prying force.
Drip Rail Gutter Extensions, WHITE - 4 Piece Set
p/n: 70-5253-260
Designed to help prevent black streaks from forming by directing rainwater runoff away from the sides of your RV. Gutter Extensions feature an extension clip that adheres directly onto the existing RV gutters.
Fuel Tank To Filler Pipe Hose - Extended Length
p/n: 70-5194-41
This Fuel Tank To Filler Pipe Hose is designed from the original part for superior fitment and function. This fuel resistant rubber hose connects the fuel tank to the filler pipe. This hose is 12" long to accommodate a 1" to 3" body lift.
Spare Tire Carrier Latch Bumper
p/n: 70-5203-37
This reproduction Spare Tire Carrier Latch Bumper is designed from the original part for an authentic fit, finish, appearance and function.
Front Center Engine Mount Rubber
p/n: 70-5172-11
This reproduction Engine Mount Rubber is designed from the original part for an authentic fit and function. A rubber only insert for the metal Front Center Engine Mount.
Upper Door Drip Rail Weatherstrip
p/n: 70-5142-73
This Upper Door To Body - Drip Rail Weatherstrip is designed from the original part for superior fitment and seal. This weatherstrip mounts directly to the body over the front or rear door to seal against the top of the door.
Upper Radiator Water Deflector
p/n: 70-5163-31
This Upper Radiator Water Deflector is designed from the original part for superior fitment and function. This filler piece is die cut from quality 3/32" thick fiber reinforced rubber to authentic original dimensions.
Windshield Molding and Door Handle Clip Pliers
p/n: 94-3520-94
This Windshield Molding and Door Handle Clip Pliers is for removing most windshield molding clips and door handle clips.
Radiator To Grille Air Deflectors
p/n: 70-5158-31
This LH and RH Radiator To Grille Air Deflector pair is designed from the original part for superior fitment and seal. Filler pieces are die cut from quality 3/32" thick fiber reinforced rubber to authentic original dimensions.
Hood Latch Seal with Peel-N-Stick
p/n: 70-5210-42
This Hood Latch Seal with Peel-N-Stick is designed from the original part for superior fitment and seal. This seal is ideal for weatherproofing and reducing vibration around the front latch area.
Brake Pedal Pad - Automatic - Ford Script - F250
p/n: 70-5204-22
This reproduction Pedal Pad with Ford Script - F250 slips over the full perimeter of the brake pedal for a precise, factory fit. Replaces original brake pedal pads. For trucks with automatic transmission.
Brake Pedal Pad - Automatic - Ford Script - Super Duty
p/n: 70-5205-22
This reproduction Pedal Pad with Ford Script - Super Duty slips over the full perimeter of the brake pedal for a precise, factory fit. Replaces original brake pedal pads. For trucks with automatic transmission.
Windshield Molding w/Rain Channel
p/n: 70-5267-52
This reproduction Windshield Molding with Rain Channel is designed from the original part for an authentic fit, finish and appearance. This is a 3-sided windshield reveal molding. Black with rain channel and no corner welds.
Heater Blower Motor Vent Tube
p/n: 70-5170-88
This Heater Blower Motor Vent Tube is designed from the original part for superior fitment and function. This molded rubber tube installs into the heater blower motor housing.
Shock Absorber Dust Shield Set
p/n: 70-5164-45
This LH and RH Shock Absorber Dust Shield Set is designed from the original part for superior fitment and function. Filler pieces are die cut from quality 3/32" thick fiber reinforced rubber to authentic original dimensions.
Steering Column To Floor Seal
p/n: 70-5155-88
This Steering Column To Floor Seal is designed from the original part for superior fitment and sealing. The seal is precision die-cut from quality EPDM sponge rubber to authentic original dimensions. This part fits to the steering column housing.
KBS Rust Converter, Aerosol Can - Black
p/n: 96-1500-96
KBS Rust Converter is designed to easily transform rust on metal surfaces into a black, stable, paint-ready primer, reducing prep time like sanding; it's fast-drying and protects against moisture, making it great for automotive or outdoor equipment.
Radiator Filler - Upper LH
p/n: 70-5153-31
This Radiator Filler is designed from the original part for superior fitment and seal. This filler piece is die cut from quality 3/32" thick fiber reinforced rubber to authentic original dimensions.
Performance Hood Weatherstrip
p/n: 70-5124-31
This Performance Hood Weatherstrip is designed for superior fitment and seal. This non-factory add on weatherstrip works to prevent the ingress of dirt and water into the under-hood area. Easy to install.
Universal Trim Hook Tool
p/n: 94-6824-94
Steele Rubber Products offers the best quality installation tools. This Universal Trim Hook Tool is designed to safely pry small bezel components from interiors without damage. Made of durable plastic.
Striker Plate Shims
p/n: 70-5264-70
This Striker Plate Shim Set is designed from the original part for an authentic fit, finish, function and appearance. A stamped steel four (4) piece set to be used behind the striker plate.
Sunroof Glass Storage Weatherstrips - On Body
p/n: 70-5212-45
A pair of custom Sunroof Glass Storage Weatherstrips to protect the sunroof glass when it’s removed and stored under the hood. These weatherstrips mount to the body with Peel-N-Stick adhesive backing.
Sunroof Glass Storage Weatherstrips - Under Hood
p/n: 70-5211-45
A pair of custom Sunroof Glass Storage Weatherstrips to protect the sunroof glass when it’s removed and stored under the hood. These weatherstrips mount to the hood with Peel-N-Stick adhesive backing.
Running Board Bolt Set
p/n: 70-5165-45
This twenty-four (24) piece Running Board Bolt Set is designed from the original part for an authentic fit, finish and function.
Radiator Side Air Deflectors
p/n: 70-5246-31
This Radiator Side Air Deflector pair is designed from the original part for superior fitment and function. These left and right deflectors fit to the sides of the radiator.
Windshield Wiper Arm Remover Tool
p/n: 94-6575-94
This Windshield Wiper Arm Remover Tool easily removes wiper arms without damage to the vehicle finish.
Light Rust and Paint Stripper Disc
p/n: 96-3173-96
A flexible 3M Light Rust and Paint Stripper grinding disc that removes rust, scale, and old paint from metal. Coarse silicon carbide abrasive cuts fast to save time. Multi-use abrasive also works on wood, fiberboard and plastics.
Spray Adhesive - 3M Super 77 Multi-Surface
p/n: 96-8127-96
Steele Rubber Products offers the best quality adhesives for restorations and vehicle builds. 3M Super 77 Multi-Surface Spray Adhesive's combination of fast tack, strong bond and clean appearance makes it ideal for multiple projects and applications.
Sun Visor Bracket Pads
p/n: 70-5167-88
This Sun Visor Bracket Pad pair is designed from the original part for superior fitment and function. Molded rubber pad which mounts under the visor mounting plate.
Windshield Molding w/o Rain Channel
p/n: 70-5266-52
This reproduction Windshield Molding without Rain Channel is designed from the original part for an authentic fit, finish and appearance. This is a 3-sided windshield reveal molding. Black without rain channel and no corner welds.
Side Window Glass Run Channel
p/n: 70-5110-58
This Side Window Glass Run Channel strip helps to eliminate window rattle and provides a smooth sliding surface for glass movement. This strip re-lines the vent window division bar post on either the left or right side of models with metal framed door glass.
Fuel Tank Filler Vent Hose
p/n: 70-5196-41
This Fuel Tank Filler Vent Hose is designed from the original part for superior fitment and function. Works for main or auxiliary fuel tanks. This fuel resistant rubber hose is 14" long to accommodate a stock to 3" body lift.
Door Bumpers
p/n: 70-5224-71
This fully molded Door Bumper pair is a quality reproduction of the original factory part. Designed to fit on the inside of the door opening, these high-quality rubber bumpers are engineered specifically for Fiero models to reduce rattling, absorb door impact, and maintain proper factory alignment.
Headlight Bumpers
p/n: 70-5209-14
This reproduction Headlight Bumper pair is designed from the original part for an authentic fit, finish and appearance. Works to reduce rattling, absorb impact, and maintain factory alignment.
Hood Bumper Pads
p/n: 70-5214-42
This Hood Bumper Pad pair is a quality reproduction of the original factory part. This rubber bumper attaches to the hood to support / cushion the hood closure.
Clutch and Brake Pedal Pads
p/n: 70-5270-22
This Clutch and Brake Pedal Pad pair is designed to slip-over a metal pedal core. These two Pedal Pads are made of top-quality EPDM dense rubber with a high level of fit and finish.
Fuel Tank Filler Neck Grommet
p/n: 70-5130-39
This Fuel Filler Neck Grommet is designed from the original part for superior fitment and seal. This grommet fits around the vehicles fuel filler neck between the filler neck and vehicle body.
Glove Box Bumpers
p/n: 70-5216-88
This Glove Box Bumper pair is designed from the original part for superior fitment, finish and function. A small but essential component, this glove box bumper ensures a snug and secure fit, preventing unwanted rattling and vibrations while driving.
Door Bumper - Ribbed
p/n: 70-5140-71
This Ribbed Door Bumper is a quality reproduction of the original factory part. This rubber bumper attaches to the vehicle body to support / cushion the door closure.
Window Channel Track Filler
This Window Channel Filler is wedged between the glass and the retaining metal frame to provide a secure seal. This is a direct-fit replacement for windows common to Class A and C RV's. Available in Black or White and by the foot or in 15- and 30-foot pre-cut lengths.
5/8" x 11/16" Hollow Triangular Weatherstrip with Peel-N-Stick
This 5/8" x 11/16" Hollow Triangular Weatherstrip with Peel-N-Stick is skirted sponge rubber with 3M Peel-N-Stick backing to provide a superior adhesion for reliable performance. Available by the foot or in 15- and 30- foot pre-cut lengths.
5/8" x 11/16" Hollow Triangular Weatherstrip with Peel-N-Stick
Easy to install and adhesive-backed for RV compartment and access doors. Available by the foot or in 5- 10- 15- and 30- foot pre-cut lengths.
5/8" x 11/16" Hollow Triangular Weatherstrip with Peel-N-Stick
A quality 5/8" x 11/16" door weatherstrip with 3M self-adhesive backing for your Street Rod or Custom Build project. Available by the foot or in 15- and 30- foot pre-cut lengths.
5/8" x 11/16" Lipped Hollow Triangular with Peel-N-Stick
A high-quality EPDM skirted extrusion with bonded 3M adhesive strip. Available by the foot or in 15- and 30- foot pre-cut lengths.
5/8" x 7/16" Door Weatherstrip with Peel-N-Stick
A quality 5/8" x 7/16" door weatherstrip with 3M self-adhesive backing for your Street Rod or Custom Build project. Available by the foot or in 15- and 30- foot pre-cut lengths.
5/8" x 7/16" Weatherstrip with Peel-N-Stick
A top-quality 5/8" x 7/16" Weatherstrip sponge rubber extrusion with a bonded Peel-N-Stick self-adhesive strip. Ideal for numerous uses. Available by the foot or in 15- and 30-foot pre-cut lengths.
Brake Pedal Pad - Automatic
p/n: 70-5269-22
This reproduction Pedal Pad slips over the full perimeter of the brake pedal for a precise, factory fit. Replaces original brake pedal pad. Detailed and finished to match the original appearance.
Clutch and Brake Pedal Pads
p/n: 70-5268-22
This Clutch and Brake Pedal Pad pair is designed to slip-over a metal pedal core. These two Pedal Pads are made of top-quality EPDM dense rubber with a high level of fit and finish.
Door Bumper
p/n: 70-5141-71
This Door Bumper is a quality reproduction of the original factory part. This "flattop" rubber bumper attaches to the vehicle body to support / cushion the door closure.
Hood To Fender Bumper
p/n: 70-5138-42
This Hood to Fender Bumper is a quality reproduction of the original factory part. This rubber bumper attaches to the front fender to support / cushion the hood closure.
Window Closure Weatherstrip
This Window Closure Weatherstrip is wedged between the glass and the retaining metal frame to seal upon closure of the window. Available by the foot or in 15- and 30-foot pre-cut lengths.
Window Closure Weatherstrip
This Window Closure Weatherstrip is wedged between the glass and the retaining metal frame to seal upon closure of the window. Available by the foot or in 15- and 30-foot pre-cut lengths.
Window Closure Weatherstrip
This Window Closure Weatherstrip is wedged between the glass and the retaining metal frame to seal upon closure of the window. Available by the foot or in 15- and 30-foot pre-cut lengths.
3/8" Window Edge Weatherstrip
This black 3/8" Window Edge Weatherstrip is designed to protect your RV against extreme weather and foreign elements. Available by the foot or in 15- and 30-foot pre-cut lengths.
3/8" Window Edge Weatherstrip
This 3/8" Window Edge Weatherstrip fits between the glass and the retaining metal frame to provide a secure seal. Available by the foot or in 15- and 30-foot pre-cut lengths.
Louvered Window Trim Weatherstrip
This Louvered Window Trim Weatherstrip fits to the t-track retaining metal frame to provide a secure seal for the glass panels. Available by the foot or in 15- and 30-foot pre-cut lengths.
Louvered Window Trim Weatherstrip
This Louvered Window Trim Weatherstrip fits to the t-track retaining metal frame to provide a secure seal for the glass panels. Available by the foot or in 15- and 30-foot pre-cut lengths.
Louvered Window Trim Weatherstrip
This Louvered Window Trim Weatherstrip fits to the t-track retaining metal frame to provide a secure seal for the glass panels. Available by the foot or in 15- and 30-foot pre-cut lengths.
Window Channel Trim Weatherstrip
This Window Channel Trim Weatherstrip is wedged between the glass and the retaining metal frame to provide a secure seal. This is a direct-fit replacement for windows common to Winnebago Class A RV's. Available by the foot or in 15- and 30-foot pre-cut lengths.
7/8" Underside Molding with Peel-N-Stick
A 7/8" Underside Molding with Peel-N-Stick made from high quality EPDM sponge rubber. Excellent for use in stationary glass installation applications. Available by the foot or in 15- and 30-foot pre-cut lengths.
7/8" Underside Window Molding with Peel-N-Stick
A 7/8" Underside Window Molding with Peel-N-Stick made from high quality EPDM sponge rubber. This type of window weatherstrip is commonly used for the flush mounting of windshields, rear windows, and stationary fixed quarter windows. Available by the foot or in 15- and 30-foot pre-cut lengths.
5/8" Underside Molding with Peel-N-Stick
A 5/8" Underside Molding with Peel-N-Stick made from high quality EPDM sponge rubber. Excellent for use in stationary glass installation applications. Available by the foot or in 15- and 30-foot pre-cut lengths.
5/8" Underside Window Molding with Peel-N-Stick
A 5/8" Underside Window Molding with Peel-N-Stick made from high quality EPDM sponge rubber. This type of window weatherstrip is commonly used for the flush mounting of windshields, rear windows, and stationary fixed quarter windows. Available by the foot or in 15- and 30-foot pre-cut lengths.
Multi-Purpose Clip
p/n: 70-5279-45
This reproduction Multi-Purpose Clip is designed from the original part for an authentic fit, function and appearance. Sold individually and used for A- arm dust shields, air baffles, bumper fillers and more.
Hand Sanding Green Coarse Scotch-Brite Pad
p/n: 96-7413-96
3M Hand Sanding Green Coarse Stripping Scotch-Brite Pad offers a powerful solution for paint and varnish removal without the drawbacks of traditional steel wool. This versatile 4-3/8-inch x 11-inch green pad is designed for efficient stripping and sanding, making it an essential tool for various surface preparation tasks.
T-Molding Trim
A high-quality 5/16" x 1/2" EPDM dense rubber extrusion, for a variety of general push on T-Molding trim for marine watercraft uses. Available by the foot or 15- and 30-foot pre-cut lengths in BLACK or WHITE.
5/16" Adhesive Applicator Brush
p/n: 94-0927-94
This 5/16" Adhesive Applicator Brush is a useful tool for applying weatherstrip glue. The soft horsehair filaments provide for the precise spreading and smoothing of the adhesive. This brush is disposable after use.