Cowl Firewall Weatherstrip
p/n: 20-2021-43
This Cowl Firewall Weatherstrip is designed from the original part for superior fitment and seal. An exact reproduction with correct contours to seal out fumes and eliminate rattles.
Glass Run Channel - Left Hand
p/n: 70-4515-58
This Glass Run Channel presses into the door channel where the door glass rolls up into. Reproduction weatherstrip is made to OEM specifications for a precise, factory like fit.
Glass Run Channel - Right Hand
p/n: 70-4516-58
This Glass Run Channel presses into the door channel where the door glass rolls up into. Reproduction weatherstrip is made to OEM specifications for a precise, factory like fit.
Quarter Post Lock Pillar Filler
p/n: 20-1509-79
This Quarter Post Lock Pillar Filler pair is designed from the original part for superior fitment and sealing. This part seals the bottom of the rear side quarter window and may also be known as a U Jamb or Quarter Post Seal.
Quarter Window Weatherstrip
p/n: 20-2834-77
This is the weatherstrip for the plexiglass quarter windows for Shelby GT350's.
Trunk Weatherstrip
p/n: 70-2124-84
This Trunk Weatherstrip is designed from the original part for superior fitment and seal. The glue-on sponge rubber weatherstrip mounts around the full perimeter of the trunk directly to the body.
Vent division bar weatherstrip
p/n: 20-1479-56
Front vent window division post seal. Fully molded with metal core and attaching tabs.
Vent Window Division Post Weatherstrips
p/n: 20-1478-56
This Front Vent Window Division Post Weatherstrip pair is designed from the original part for superior fitment and seal. These pieces mount on the vertical division post with rivets and seal as the vent glass closes against them.
Convertible Roof Rail Weatherstrip T-Bolt Set
p/n: 70-4606-67
These Convertible Top Roof Rail Weatherstrip T-Bolt reproductions are designed from the original part for superior fitment and function. This twenty two (22) t-bolts and twenty two (22) nut set fastens to the convertible top bow weatherstrips.
Headlight Seal
p/n: 27-0094-14
Weatherstrip, headlight bezel. Exact original profile.Width: .3125 inches.
Hood to Cowl Weatherstrip
p/n: 30-0233-42
Seal, hood to cowl. High quality closed cell sponge rubber construction as original.Width: .4375 inches. Height: .5625 inches.
Side Window Glass Run Channels
p/n: 70-4641-58
This Side Window Glass Run Channel pair is designed from the original part for superior fitment and seal. These two (2) pieces of flexible window run channel are for the sides and top of door windows.
Peel-N-Stick Trunk Decklid Weatherstrip
p/n: 20-2858-WT
This Peel-N-Stick Trunk Decklid Weatherstrip is designed for superior fitment and seal. The weatherstrip mounts around the full perimeter of the trunk decklid to seal directly to the body. Easy to install 3M Peel-N-Stick backing provides superior adhesion for reliable performance.
Hood to radiator weatherstrip
p/n: 60-0670-42
Weatherstrip or seal, hood panel to radiator support. Correct extruded rubber strip. Used on vehicles with factory A/C.
5" Wide Black Bow Drill Cloth Tape - with Adhesive
p/n: 70-1175-65
This Black Bow Drill Cloth Tape is used for covering convertible side window weatherstrip. This material measures five (5) inches by five (5) foot roll with a pressure sensitive adhesive.
Chrome Mylar Locking Strip
p/n: 70-3425-52
This Chrome Mylar Locking Strip inserts into the weatherstrip to lock in the glass for the rear window. The strip is designed to be installed during glass replacement.
Windshield Frame To Cowl Weatherstrip
p/n: 70-3004-42
This Windshield Frame To Cowl Weatherstrip is designed from the original part for superior fitment and seal. This cowl rubber goes in between the windshield frame and cowl. This part also fits the 1952-1971 M38A1 model.
Beltline Weatherstrip
These general use side window horizontal weatherstrips are flexible, pile lined, rubber covered, with a black bead. Available in 2ft pair, 3ft pair, and 6ft length.
Beltline Weatherstrips
p/n: 70-3817-57
Window felt beltline weatherstrips inner and / or outer. Flexible, pile lined, rubber covered, with black bead. Available in 2ft. pair.
Swing-Out Windshield Weatherstrip Set
p/n: 40-0171-52
This three (3) piece Swing-Out Windshield Weatherstrip Set is designed for superior fitment, finish and function. Three (3) piece set, consisting of stationary weatherstripping for bottom and sides.
Trunk Weatherstrip
p/n: 20-1688-84
This Trunk Weatherstrip is designed from the original part for superior fitment and seal. This sponge rubber weatherstrip mounts around the full perimeter of the trunk directly to the body.
5/16" Peel-N-Stick Hood to Cowl Weatherstrip
This Peel-N-Stick Hood to Cowl is made from high-quality EPDM dense rubber for your Street Rod or Custom Build project. The weatherstrip is typically used to support or cushion the hood closure. Available in 10ft and 15ft lengths.
Door Weatherstrip - Right Rear Extended Cab
p/n: 70-5088-73
This Door Weatherstrip is designed from the original part for superior fitment and seal. This weatherstrip installs (pins) on the top, side and bottom of the right rear extended cab suicide door.
Hood to Cowl Sponge Rubber Weatherstrip with Peel-N-Stick
5/16" x 3/4" inch Peel-N-Stick sponge rubber cushioning strip. Typically used for hood to cowl applications. Available in ten (10) or fifteen (15) foot lengths.
Push-Out Window Weatherstrip
p/n: 70-4183-76
This Push-Out Window Weatherstrip mounts around the full perimeter of the glass and will flex around the window corners. A replacement for the original part offering a precise fit.
Push-Out Window Weatherstrip
p/n: 70-4038-81
This Push-Out Window Weatherstrip is for the side OR rear push-out windows. This outer gasket goes around the outside perimeter of the frame and seals against the van when the window is closed.
Liftgate Weatherstrip
p/n: 70-4122-85
This Liftgate Weatherstrip seal is designed from the original part for superior fitment and seal. The push-on style weatherstrip mounts on the upper portion of the body on liftgate models.
Window Weatherstrip Lockstrip - Chrome
p/n: 70-4018-52
This Window Weatherstrip Lockstrip with Chrome Strip inserts into the weatherstrip to lock in the glass. Made from high quality materials to the original design for a factory like fit and appearance.
Hood To Cowl Weatherstrip
p/n: 50-0495-43
This Hood To Cowl Weatherstrip is designed from the original part for superior fitment and seal. This 48” long x 1-1/8” wide weatherstrip provides complete coverage.
Hood To Cowl Weatherstrip
p/n: 82-0067-43
This Hood To Cowl Weatherstrip is designed from the original part for superior fitment and seal. An exact reproduction of the original profile. This weatherstrip installs at the rear of the engine bay to seal between the hood and vehicle body cowl.
Side Window Leading Edge Weatherstrip
p/n: 50-0445-80
This Side Window Leading Edge Weatherstrip pair is designed from the original part for superior fitment and seal. This part attaches to the vertical edge of the rear side windows when the rear side windows are fully raised.
Tailgate Weatherstrip
p/n: 70-1519-87
Weatherstrip, tailgate opening. Pinchweld finish on body. This tailgate weatherstrip reproduction is designed from the original part for superior fitment and seal.
Taillight Housing To Rear Quarter Panel Weatherstrips
p/n: 70-2166-15
This Taillight Housing To Rear Quarter Panel Weatherstrip pair is designed from the original part for superior fitment and sealing. These reproduction weatherstrips fit between taillight frame housing and the body. Two (2) proper profile extrusion weatherstrips twenty-four (24) inches long.
Front Door Weatherstrips - Full Size
p/n: 70-2994-72
This Front Door Weatherstrip pair is designed from the original parts for superior fitment, finish and function. These primary door weatherstrips mount ( pin and glue) directly to the left and right doors sealing the full perimeter of the doors against the vehicle body when the door is closed. For full size doors.
Push-Out Window Weatherstrip
p/n: 70-4751-76
This Push-Out Window Weatherstrip is designed from the original part for superior fitment, appearance and seal. This window weatherstrip fits to the body around the window opening to seal the push out window when closed.
Trunk Weatherstrip
p/n: 82-0028-84
This Trunk Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.
Front Door Glass Channel Triangle Weatherstrips
p/n: 70-4710-58
This Front Door Glass Channel Triangle Weatherstrip pair is manufactured to OEM specifications to install for an authentic fit, finish and function. Correct six (6") inch vertical seal at the front edge of the door glass.
Front Vent Window Glass Edge Weatherstrips
p/n: 70-4896-56
This Front Vent Window Glass Edge Weatherstrip pair is designed from the original part for superior fitment and seal. Felt (wooly napping strip) on extruded rubber with steel inserts that have original style mounting tabs or holes.
Hood To Cowl Weatherstrip
p/n: 60-0153-42
This Hood To Cowl Weatherstrip is designed from the original part for superior fitment and seal. An exact copy reproduction of the original profile. This weatherstrip installs at the rear of the engine bay to seal between the hood and vehicle body cowl.
Hood To Cowl Weatherstrip
p/n: 70-5148-43
This Hood To Cowl Weatherstrip is designed from the original part for superior fitment and seal. This weatherstrip installs at the rear of the engine bay to seal between the hood and vehicle body cowl.
Hood To Cowl Weatherstrip
p/n: 70-5072-43
This Hood To Cowl Weatherstrip is designed from the original part for superior fitment and seal. An exact copy reproduction of the original profile. This weatherstrip installs at the rear of the engine bay to seal between the hood and vehicle body cowl.
Hood To Cowl Weatherstrip
p/n: 60-0138-42
This Hood To Cowl Weatherstrip pair installs at the rear of the engine bay to seal between the hood and vehicle body cowl. Sold as a pair for left and right side.
Lower Door Weatherstrips
p/n: 60-0313-73
This Lower Door Weatherstrip pair is designed from the original part for superior fitment and seal. Each weatherstrip is approximately thirty-two and one half (32-1/2) inches long and retained by a metal strip.
Unbeaded Rubber Channel 96"
p/n: 70-3578-58
Use anywhere a mohair-lined channel is needed to eliminate rattle, provide a smooth sliding surface and protect glass. Available in 96" lengths.
Beltline Rubber Scraper Weatherstrip
p/n: 60-0287-58
This Beltline Rubber Scraper Weatherstrip pair is designed from the original part for an authentic fit, finish, and appearance. Fits at the door outer window at beltline. Each strip approximately is twenty-six (26) inches to twenty-seven (27) inches long.
Hard Top Side Weatherstrips - Removable Top
p/n: 70-5119-68
This Hard Top Side Weatherstrip pair is designed from the original part for superior fitment and seal. These sponge rubber weatherstrips mount on the driver and passenger body rail sides of the shell.
Vent Window Division Post Back Edge Weatherstrips
p/n: 20-1332-56
A Vent Window Division Post Back Edge Weatherstrip pair designed from the original part for superior fitment and seal. This piece mounts on the vertical division post with rivets and seals as the vent glass closes against it.
Peel-N-Stick Trunk Decklid Weatherstrip
p/n: 20-2859-WT
This Peel-N-Stick Trunk Decklid Weatherstrip is designed for superior fitment and seal. The weatherstrip mounts to the trunk decklid with the lip facing to the inside around the full perimeter of the decklid. Easy to install 3M Peel-N-Stick backing provides superior adhesion for reliable performance.
Hood To Cowl Weatherstrip
p/n: 70-4835-43
This Hood To Cowl Weatherstrip is designed from the original part for superior fitment and seal. This weatherstrip installs at the rear of the engine bay to seal between the hood and vehicle body cowl.
Hood To Cowl Weatherstrip
p/n: 70-1698-43
This Hood To Cowl Weatherstrip mounts at the rear of the engine bay to seal between the hood and vehicle body cowl. A reproduction designed from original part so it fits correctly.
Trunk Decklid Weatherstrip
p/n: 20-0095-84
This Trunk Decklid Weatherstrip is designed from the original part for superior fitment and seal. The weatherstrip mounts around the full perimeter of the trunk directly to the body.
Trunk Weatherstrip
p/n: 20-0302-84
This Trunk Weatherstrip is designed from the original part for superior fitment and seal. The decklid weatherstrip mounts around the full perimeter of the trunk directly to the body.
Trunk Weatherstrip
p/n: 20-2865-84
This Trunk Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.
Fender Skirt Edge Weatherstrip
p/n: 20-1317-44
This Fender Skirt Edge Weatherstrip pair is designed from the original part for superior fitment, finish, and seal. This weatherstrips fits between the rear wheel fender skirt and the rear fender quarter panel.
Fender Skirt Edge Weatherstrips
p/n: 20-0061-44
This Fender Skirt Edge Weatherstrip pair is designed from the original part for superior fitment and seal. This weatherstrip fits between the rear quarter panel wheel opening and the fender skirt.
Firewall to Hood Weatherstrip - Cowl Lacing
p/n: 20-3007-43
This Firewall to Hood Weatherstrip - Cowl Lacing is designed from the original part for superior fitment and seal. A reproduction using dense rubber extrusion and tack fasteners.
Trunk Weatherstrip
p/n: 70-4508-85
This Trunk Weatherstrip mounts in the trunk area with weatherstrip adhesive. Reproduction weatherstrip is made from ozone resistant EPDM sponge rubber to OEM specifications for a precise, factory fit.
Unbeaded Rubber Channel 96"
p/n: 70-3577-58
Use anywhere a mohair-lined channel is needed to eliminate rattle, provide a smooth sliding surface and protect glass. Available in 96" lengths.
Door Weatherstrip
p/n: 70-0085-73
Weatherstrip, door opening, fits retainer under edge of body sill to form seal when door is closed. Six (6) foot strips.Length: 72.0 inches. Width: 1.
Trunk Weatherstrip
p/n: 70-0797-84
This Trunk Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk lid.
Rear Cargo Doors Push-Out Window Weatherstrip
p/n: 70-5221-76
This Push-Out Window Weatherstrip mounts around the full perimeter of the glass and will flex around the window corners. A replacement for the original part offering a precise fit.
Upper Door Drip Rail Weatherstrip
p/n: 70-4880-73
This Upper Door Drip Rail Weatherstrip is made from high-quality ozone-resistant PVC rubber. This Left or Right single piece weatherstrip easily installs by pressing it onto the upper part of the cab opening. Can fit on either the driver or passenger side.
Front Door At Beltline Weatherstrips
p/n: 20-0094-73
This Front Door At Beltline Weatherstrip pair is designed from the original part for superior fitment and seal. This inner dog leg door seal fits at the door front at beltline inner.
Quarter Window Leading Edge
p/n: 50-0428-119
A high quality quarter window vertical leading edge weatherstrip for your Street Rod or Custom Build project. Available as a pair.
Side Window Leading Edge Weatherstrips
p/n: 50-0428-80
This Side Window Leading Edge Weatherstrip pair is designed from the original part for superior fitment and seal. This part attaches to the vertical edge of the rear side windows when the rear side windows are fully raised.
Trunk Weatherstrip
p/n: 20-2862-84
This Trunk Weatherstrip is designed from the original part for superior fitment and seal. The decklid weatherstrip mounts around the full perimeter of the trunk directly to the body.
Quarter Window Inner Weatherstrip - LH or RH
p/n: 70-5330-77
This Quarter Window Inner Weatherstrip is designed from the original part for superior fitment and seal. This LH or RH molded weatherstrip fits in between the quarter glass and the frame.
Hood To Cowl - Lacing Weatherstrip
p/n: 70-5176-43
This Hood To Cowl Weatherstrip is designed from the original part for superior fitment and seal. This push-on weatherstrip installs at the rear of the engine bay to seal between the hood and vehicle body cowl.
Hood To Cowl Weatherstrip
p/n: 70-4533-43
This Hood To Cowl Weatherstrip is designed from the original part for superior fitment and seal. This weatherstrip mounts at the rear of the engine bay to seal between the hood and vehicle body cowl.
Beltline Weatherstrip
These general use side window horizontal weatherstrips are flexible, pile lined, rubber covered, with a black bead. Available in 2ft and 3ft pairs.
Floor Shift | Carpet Grommet
p/n: 70-3265-88
This Floor Shift / Carpet Grommet is designed from the original part for superior fitment and seal. This part seals the carpet edge to the floor shift boot. For models without floor console.
Front of Vent Window to Door Seals
p/n: 20-2786-62
These Front of Vent Window to Door Seals are installed at the front of the door and next to the door weatherstrip. Sold as a pair.
Quarter Window Vertical Leading Edge
p/n: 20-2845-80
This Quarter Window Vertical Leading Edge pair is the vertical piece of weatherstrip that seals between the door glass and the rear quarter window glass when the quarter window is raised and closed.
Rear Window Divider Bar Weatherstrip
p/n: 10-0164-83
This Rear Window Divider Bar Weatherstrip is used to seal and separate the two glasses of the rear window. It is designed to be used along with one of our rear window gasket weatherstrips.
Trunk Weatherstrip
p/n: 20-2265-84
This Trunk Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.
Window Felt Beltline Weatherstrips - 2ft. Pair
p/n: 70-3816-57
This side window Window Felt Beltline Weatherstrip pair can be used as inner and/or outer. The weatherstrip is flexible, pile lined, rubber covered, with black bead. Available in 2ft. pairs.
Side Window Glass Run Channels
p/n: 70-5022-58
These Side Window Glass Run Channels fit two (2) and four (4) door sedans and wagons. Channels come in a pair for both sides of the vehicle. Produced using premium quality, ozone resistant materials.
Convertible Front Header Bow Weatherstrip
p/n: 20-0110-64
This Convertible Top Front Header Bow Weatherstrip is designed from the original part for superior fitment and seal. This weatherstrip fits between the top of the windshield frame and the front of the convertible top.
Front Of Door Weatherstrips - Convertible
p/n: 20-1644-73
This Front Of Door Weatherstrip pair is designed from the original part for superior fitment and seal. Left and Right door weatherstrips molded to fit hinge area of the door.
Rear Bumper To Body Stone Deflector
p/n: 20-1053-29
This Rear Bumper To Body Stone Deflector is designed from the original part for a superior fitment level. This filler piece seals between the rear bumper and the body.
Door Weatherstrips
p/n: 20-0390-72
This Door Weatherstrip is designed from the original part for superior fitment, finish and function. This rectangular sponge rubber extrusion is made of a superior grade, 100% EPDM rubber. It is designed to last- it will not fade, shrink or crack. Excellent at resisting moisture, Ozone and UV exposure.
Hood To Cowl Rear Weatherstrip
p/n: 70-4692-43
This Hood To Cowl Rear Weatherstrip is designed from the original part for superior fitment and seal. A reproduction manufactured to the original profile and design specifications. This weatherstrip installs at the rear of the engine bay to seal between the hood and vehicle body cowl.
Hood to Cowl Weatherstrip
p/n: 70-3448-42
This Hood to Cowl weatherstrip is for superior fitment and sealing. This extruded sponge rubber clinch seal strip mounts at the rear of the engine bay directly to the body on the cowl lip.
Windshield Frame Upper (Header) Weatherstrip
p/n: 70-4476-52
This Windshield Frame Upper (Header) Weatherstrip is designed from the original part for superior fitment and sealing. This windshield frame upper weatherstrips mounts to seal between the windshield frame and hardtop of the vehicle. Made of a high-quality EPDM rubber as the original.
5" Wide Black Bow Drill Cloth - No Adhesive
p/n: 70-5128-65
This Black Bow Drill Cloth is used for covering convertible side window weatherstrip. This material measures five (5) inches by five (5) foot roll. There is no adhesive on this material.
Hood To Cowl Weatherstrip
p/n: 70-1446-43
This Hood To Cowl Weatherstrip is designed from the original part for superior fitment and seal. An exact reproduction of the original profile. This weatherstrip installs at the rear of the engine bay to seal between the hood and vehicle body cowl.
Trunk Weatherstrip
p/n: 20-1389-84
This Trunk Weatherstrip is designed from the original part for superior fitment and seal. The weatherstrip mounts around the full perimeter of the trunk lid.
Rear Window Gasket Locking Strip
p/n: 70-5262-52
This Sliding Rear Window Gasket Locking Strip is designed from the original part for superior fitment and function. This chrome locking strip inserts into the weatherstrip to lock-in the glass. It includes the two (2) corner cover joints.
Firewall To Hood Weatherstrip
p/n: 70-4200-43
This Firewall To Hood Weatherstrip is designed from the original part for superior fitment and seal. This weatherstrip has the proper cowl radius to fit correctly. Mounts with ten (10) pre-installed clips at the rear of the engine bay directly to the body.
Glass Retainer Clip Tool
p/n: 94-0106-94
This Glass Retainer Clip Tool is specifically designed to fit trim clips over the studs and virtually eliminates glass breakage. Also reduces the risk of chips and scratches to glass windows caused by makeshift tools.
Inner Beltline Weatherstrip - 44 Inch
p/n: 70-5193-61
A forty-four (44) inch long Inner Beltline Weatherstrip. For use on front, rear and quarter windows. Chrome edge metal spine with rubber lip and a flocked surface for glass to slide on. Excellent for use on fiberglass bodied vehicles.
Quarter Post To Window Seals - Fastback
p/n: 20-2841-79
This Quarter Post To Window Seal pair is designed from the original part for superior fitment and seal. This part seals the bottom of the rear side window, and may also be known as a door jamb seal.
Trunk Weatherstrip
p/n: 20-2863-84
This Trunk Weatherstrip is designed from the original part for superior fitment and seal. The decklid weatherstrip mounts around the full perimeter of the trunk directly to the body.
Convertible Top Pads
p/n: 20-1158-67
This Convertible Roof Top Pad pair is designed from the original part for superior fitment and function. The part fits at the top of the rear quarter window on the roof.
Convertible Top Rail Drains
p/n: 20-1157-67
This Convertible Top Rail Water Drain pair is designed from the original part for superior fitment and function. The part fits on the convertible top rail at the rear as a water drain.
Rear Hatch Outer Side Weatherstrip - LH or RH
p/n: 70-5332-85
This single piece Rear Hatch Outer Side Weatherstrip is designed from the original part for superior fitment and seal. This is the left or right outer weatherstrip seal that mounts along the sides of the hatch opening with weatherstrip adhesive (not included).
Bottom of Door Weatherstrips
p/n: 20-2833-73
This Bottom of Door Weatherstrip pair is designed from the original part for superior fitment and seal. This weatherstrip fits along the bottom of the door to close against the vehicle body. Includes attaching screws.